2. Ohlins
  3. XTN KIT DRC

Ohlins XTN KIT DRC Mounting Instruction

  • Hello! I am an AI chatbot trained to assist you with the Ohlins XTN KIT DRC Mounting Instruction. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DRC Update kit
XTREME CAR
Mounting Instructions
2
XTREME CAR DRC UPDATE KIT
DRC Update Kit for Xtreme Car
We are happy to introduce for the TTX30 the WRC developed Dynamic Rebound Control, DRC.
This feature adds traction and smoothness to the car and allows you to close the rebound adjuster
without losing traction and with that the possibility to reduce spring rate to gain even more traction
without losing body stability.
Each kit contains parts for 4 dampers.
Kit parts DRC Update kit
Component Part Part Description Qty per Assembly
03077-31 Piston TTX30 DRC 4
01200-01 Mounting instruction 1
00592-32 Packing 220x160x65 1
21750-25 Washer 8/25/2 4
21018-21 Piston band soft 6.2/30 4
00638-66 O-ring 21.95x1.78 4
00530-22 Shim 12/22/0.30 4
01149-01 Wave washer 12/18/3.5 4
06751-02 Spacer 12x14.7x2.5 4
02056-01 Check valve seat 4
00185-12 Shim 8/12/0.15 16
00187-22 Shim 8/22/0.25 4
To install the parts, remove the standard piston and all components on the shaft end. Install the
parts included in the kit in the order specied on the drawing and reuse the nut from the original
installation. Torque to specied value.
This DRC setting is applicable to all settings delivered from Öhlins. There is no need to change
the setting when installing this kit. By installing this feature there might be improvements to make
by changing setting, recommended is to rst changing clicks on the damper and if necessary
re-shimming the damper to get back to the middle of the adjustment range.
3
XTREME CAR DRC UPDATE KIT
Öhlins Racing AB
Box 722
S-194 27 Upplands Väsby, Sweden
Phone +46 8 590 025 00
fax +46 8 590 025 80
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
To nd the latest information
contact an Öhlins distributor.
Please contact Öhlins if you have
any questions regarding the
contents in this document.
Part no. MI_XTN KIT DRC
Issued 2020-10-15
/