2. Axial
  3. CH3217

Axial CH3217 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Axial CH3217 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Step 1:
Using a trim panel removal tool, carefully pry between the
front sidemarker light and the bumper to release the clip.
Slide the sidemarker light out to remove from the bumper.
Step 3:
Plug in the light into the factory light socket. Twist the light
socket into the light clockwise. **Note: Test the light for
proper function. If it does not light up, rotate the socket
180 degrees.
Installation Instructions for 2008-2014 Challenger Front LED Sidemarker Lights
Step 2:
Twist the socket counter-clockwise to remove from the
factory light. Then remove the bulb from the socket.
Step 4:
Insert the locating tab into the bumper, then carefully press
the light until it clicks into place securing it to the bumper.
CH3217
CH3218
Towards Front of
Vehicle
Installation Instructions for 2008-2014 Challenger Rear LED Sidemarker Lights
Step 1:
Using a trim panel removal tool, carefully pry between the
rear sidemarker light and the bumper to release the clip.
Slide the sidemarker light out to remove from the bumper.
Step 3:
Plug in the light into the factory light socket. Twist the light
socket into the light clockwise. **Note: T
est the light for
proper function. If it does not light up, rotate the socket 180
degrees.
Step 2:
Twist the socket counter-clockwise to remove from the
factory light. Then remove the bulb from the socket.
Step 4:
Insert the locating tab into the bumper, then carefully press
the light until it clicks into place securing it to the bumper.
Towards Rear of
Vehicle
/