This Easy Start Guide will help you setup the modem and connect to the Internet . Before proceeding with the installation,
please prepare your Internet account settings given by your Internet Service Provider.
Easy Start Guide
Step 1: Equipment Check
The following items are pre-packaged with your modem.
Hardware Setup
STEP 1
Equipment Check
STEP 2
Setting up your
Hardware
STEP 3
Configuring the Wireless
Network Settings
A
D
C
B
Launch a Web Browser and input http://192.168.254.254 on the
address bar then press Enter. You will be redirected to the Basic
Mode of your modem’s Web User Interface.
On the Web User Interface, click the Login button then input user
for username and user for password to login.
On the main menu, click on
Setup. On the left pane, click WLAN
then Basic.
Step 3: Configuring the Wireless Network Settings
A
B
Kindly follow the steps below in configuring your modem’s Wireless
Network Settings.
TO ENABLE/DISABLE THE WIRELESS AND SSID BROADCAST:
Step 2: Setting Up Your Hardware
Connect the Microfilter to the Telephone Outlet.
Using the Telephone Cable, connect the Modem to the Microfilter.
Using the Ethernet Cable, connect the Modem to the Computer.
Connect the Power Adapter to the Modem.
Power ON the Modem.
A
B
C
D
E
C
DSL5029EN(1T1R)
DSL
Microfilter
Ethernet Cable
(RJ45)
Easy Start
Guide
Telephone Cable
(RJ11)
Power
Adapter
1
2
3
4
5
6
DC Jack
Power Button
Ethernet
Ports 1-4
DSL Port
WPS
Status
WiFi Status
Power LED
Internet LED
DSL LED
Ethernet Link
Status 1-4
E
TROUBLESHOOTING TIPS
Internet problems? Let us help you bring back that rocking, high-
speed connection!
DO YOU HAVE INTERNET
CONNECTION?
Check for Power.
Congratulations! Enjoy your
NO
YES
Did you reboot the
modem already?
Did you reset the
modem already?
NO
Power OFF and ON the
modem.
Go back to START.
NO
Disable/Enable Wireless on client
and modem.
Move client closer to modem.
Connect to correct SSID.
Enter the Correct Username and
Password.
Did you restart your client?
Press the Reset button
for 10 seconds.
Go back to START.
NO
Reinsert both ends of the
Ethernet cable to different
ports.
Did you restart your client?
YES
YES
NO
Power OFF and ON
the client (e.g. mobile
or PC).
Go back to START.
B
B
A
ON/OFF Button should be ON.
Reinsert both ends of Power
Adapter.
Check if power outlet is working.
Are the LED lights OFF?
Wait for 2-3 minutes.
Reinsert telephone Jack cable at
both ends (if needed).
Are there any red LED lights?
NO
YES
NO
Go back to START.
Are you connected
wirelessly?
POWER IS ON
POWER IS OFF
B
A
START
Sorry, it’s time to ask for
help. Please contact our
Talk2Globe specialist.
A
YES
You may enable or disable the Wireless LAN interface by ticking
the Disable Wireless LAN interface checkbox on the Wireless
Basict Settings page.
Click the Apply Changes button to save and apply changes.
TO CONFIGURE THE WIRELESS SSID AND NETWORK KEY:
Under the WLAN tab, click Basic submenu .
On the SSID text box, kindly input your preferred SSID or Wireless
Network Name.
NOTE: The default Wireless SSID and Wireless Network Key are
found on the device label sticker at the bottom of your modem.
Click Security
Input your preferred wireless network password.
You may also change the wireless security mode and the
wireless encryption. You may also opt to enable or disable the
WPS function of your router in this page as well.
NOTE: The default wireless Security Mode is set to WPAPSK and
the Encryption is set to TKIP/AES. The WPS feature on the other
hand is disabled.
Click the Apply Changes button to save and apply changes.
A
C
D
E
D
E
B
under WLAN tab. On the Pre-Shared Key input box,
GlobeAtHome_Test
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Belkin F5D9630-4A User manual
-
-
D-Link DI-724GU User manual
-
Dlink Vonage User manual
-
-
Dlink DWL-510 Owner's manual
-
-
Arris WTM652 Owner's manual
-
-
Asus DSL-N13 User manual