Silvercrest SL35T Operation and Safety Notes

Brand: Silvercrest

Model: SL35T

Category: TV set-top boxes

Type: Operation and Safety Notes

DVB-T-RECEIVER

Bedienungs- und Sicherheitshinweise

DVB-T-VASTAANOTIN

Käyttö- ja turvaohjeet

DVB-T-MOTTAGARE

Bruksanvisning och säkerhetsanvisningar

DVB-T RECEIVER

Brugs- og sikkerhedsanvisninger

ΔΕΚΤΗΣ DVB-T

Υποδείξεις χειρισμού και ασφαλείας

DVB-T RECEIVER

Operation and Safety Notes

DVB-T RECEIVER

SL35T

26276_DVBTReceiver_SL35T_Cover_LB3.indd 2 10.03.09 12:54

Last Information Update · Tietojen tila · Informationsstatus · Tilstand af

information · Έκδοση των πληροφοριών · Stand der Informationen:

03 / 2009 · Ident.-No.: SL35T 032009 - 3

IAN: 26276

COMAG Handels AG

Zillenhardtstr. 41

D-73037 Göppingen

26276_DVBTReceiver_SL35T_Cover_LB3.indd 1 10.03.09 12:54

Please open! Please open!

DVB-T-RECEIVER

Bedienungs- und Sicherheitshinweise

RECEPTOR DIGITAL

TERRESTRE DVB-T

Instrucciones de utilización y de seguridad

RICEVITORE DVB-T

Indicazioni per l’uso e per la sicurezza

DVB-T RECEIVER

Operation and Safety Notes

SL35T

RECEPTOR DIGITAL

TERRESTRE DVB-T

RICEVITORE DVB-T

26276_DVBTReceiver_SL35T_Cover_LB5.indd 2 10.03.09 12:53

Estado de las informaciones · Versione delle informazioni

Last Information Update · Stand der Informationen:

03 / 2009 · Ident.-No.: SL35T 032009 - 5

IAN: 26276

COMAG Handels AG

Zillenhardtstr. 41

D-73037 Göppingen

26276_DVBTReceiver_SL35T_Cover_LB5.indd 1 10.03.09 12:53

Please open! Please open!

STBY

SL 35 T

Digitaler terrestrischer Receiver

CH-

CH+

Faulty-Description:

GUARANTEE

Sender please use block-writing in boxes with CAPITAL LETTERS

Surname

Firstname

Street

Postcode and city

Telefon no. with areacode

Signature of buyer

PLEASE CUT THIS CARD AND ENCLOSE IT TO THE RETURNING GOOD

•

Guarantee

COMAG

Service Centre

Unit 1 Longs

Industrial Estate

Englands Lane

Gorleston Great Yarmouth

Norfolk NR31 6BE

Service-Hotline:

00 44 (0) 8708 900137

E-mail:

[email protected]

Model / Type: SL 35 T

Overview of equipment

Front side of the receiver

Rear side of the receiver

Remote control

Overview of equipment

Front side of the receiver

1 – Infrared sensor for the signal of the remote control

2 LED STBY LED is illuminated if the receiver is in standby mode

3 LED ON LED is illuminated if the receiver is switched on

4 STANDBY Switches on and switches to the standby mode

The default settings will be restored if you keep this key

pressed for more than 10 seconds.

Caution! By doing this, your personal settings will be

deleted.

5 CH – Switches to the next lower channel location

Cursor moves down

6 CH + Switches to the next higher channel location

Cursor moves up

Rear side of the receiver

1 ANT IN Coaxial connection for the antenna cable

2 ANT OUT Coaxial connection for a second receiver

3 VCR SCART connection for the video set

4 TV SCART connection for the TV set

5 100 – 240 V~ Mains connection

50/60 Hz, 20 W

6 ON/OFF Mains switch

7 RS 232 Serial port

8 COAXIAL Digital coaxial audio output

9 AUDIO L Left stereo audio connection

10 AUDIO R Right stereo audio connection

100% Black+Silver

for light surfaces

STBY

SL 35 T

Digitaler terrestrischer Receiver

CH-

CH+

Faulty-Description:

GUARANTEE

Sender please use block-writing in boxes with CAPITAL LETTERS

Surname

Firstname

Street

Postcode and city

Telefon no. with areacode

Signature of buyer

PLEASE CUT THIS CARD AND ENCLOSE IT TO THE RETURNING GOOD

•

Guarantee

Model / Type: SL 35 T

Overview of equipment

Front side of the receiver

Rear side of the receiver

Remote control

Overview of equipment

Front side of the receiver

1 – Infrared sensor for the signal of the remote control

2 LED STBY LED is illuminated if the receiver is in standby mode

3 LED ON LED is illuminated if the receiver is switched on

4 STANDBY Switches on and switches to the standby mode

The default settings will be restored if you keep this key

pressed for more than 10 seconds.

Caution! By doing this, your personal settings will be

deleted.

5 CH – Switches to the next lower channel location

Cursor moves down

6 CH + Switches to the next higher channel location

Cursor moves up

Rear side of the receiver

1 ANT IN Coaxial connection for the antenna cable

2 ANT OUT Coaxial connection for a second receiver

3 VCR SCART connection for the video set

4 TV SCART connection for the TV set

5 100 – 240 V~ Mains connection

50/60 Hz, 20 W

6 ON/OFF Mains switch

7 RS 232 Serial port

8 COAXIAL Digital coaxial audio output

9 AUDIO L Left stereo audio connection

10 AUDIO R Right stereo audio connection

Zintek Systems Ltd

Zintek House

Eurohaul Centre

Greenhills Road

Tallaght

Dublin 24

Service-Hotline:

00353 (0) 1400 8353

E-Mail:

[email protected]

100% Black+Silver

for light surfaces

Remote control

1 Standby Switches on and to the standby mode

2 LIST Displays TV channel list

3 HILFE Invokes help function

4 TIMER Invokes timer function

5 TEXT Invokes Teletext

6 MUTE Turns off sound

7 M/P Multi-picture function, invokes thumbnail view

8 V+ Increases volume / cursor moves to the right

9 OK In normal mode: invokes current channel list

In a menu: confirms menu item

10 CH ▼ Switches to the next lower channel location/

Cursor moves downwards

11 FAV Invokes own favourites list

12 RECALL Switches to pre-selected channel

13 PAUSE Stills the frame

14 INFO Displays reception data of the current channel

15 0-9 Selects channel directly, numerical input

16 P- In normal mode: change of channel group

In TV channel list: Ten-key block commutation

17 P+ In normal mode: change of channel group

In TV channel list: Ten-key block commutation

18 V- Decreases volume / cursor moves to the left

19 CH ▲ Switches to the next higher channel location/

cursor moves up

20 MENU Invokes main menu

21 EXIT Exits menu or menu item

22 Audio Changes audio mode

23 EPG Invokes Electronic Programme Guide (if offered by

the broadcasting station))

24 TV/Radio Switches between TV and radio mode

25 ZOOM Enlarges TV image

Digital terrestrial receiver SL 35 T

Operating manual

Version 1.3 GB_MT, as of 30/01/2009

Modifications and errors reserved.

We do not assume any liability for printing errors.

Dear customer,

Having in mind an environmentally friendly behaviour we

ask you to switch off your receiver after usage by

operating the mains switch at the rear side of the device.

With this, you contribute to the protection of the

environment and save money.

Preface

This operating manual will help you in the

• appropriate

• safe and

• favourable

usage of the digital terrestrial satellite receiver SL 35 T, in

short, the “receiver”.

We assume that the users of the receiver have overall

knowledge regarding handling audio and

video equipment.

Each person who

• installs,

• connects,

• operates,

• cleans

• disposes of

this receiver must be familiar with the entire content of

this operating manual. Always keep this operating

manual in the proximity of the receiver.

This device is labelled with the CE mark and with the GS

mark of the TÜV Rheinland (Technical Supervisory

Association).

Style features

Specific style features have been used in different

sections of the operating manual. Thus, you can easily

differentiate whether it concerns

normal text

• enumerations

 actions

Contents

Preface............................................................................3

Style features .................................................................4

Contents .........................................................................5

Safety instructions.........................................................7

Basic safety instructions ...........................................7

Explanation of safety instructions ..................................10

Appropriate use .............................................................11

Scope of supply ...........................................................12

Description ...................................................................13

Connecting the receiver ..............................................16

Connecting the receiver to the antenna .........................16

Connection with the SCART cable.................................17

Connection with the YUV cable .....................................19

Connection with the Cinch cable....................................22

Connection of an audio-digital receiver..........................24

Connecting the receiver to the mains supply .................26

Getting started .............................................................27

Switching on and off ......................................................27

Remote control ..............................................................27

Initial installation with the installation assistant ..............29

Operation......................................................................30

Screen display messages when switching channels .....30

User interface on the TV screen ....................................31

Menu navigation ............................................................31

Menu structure...............................................................33

Channel (symbol: TV) ....................................................34

Installation (symbol: Antenna)........................................37

System Setup (symbol: gearwheel) ...............................39

Tools (symbol: tools)......................................................43

Keys with special functions........................................45

TV/Radio........................................................................45

ZOOM............................................................................45

HILFE.............................................................................45

AUDIO ...........................................................................45

EPG ...............................................................................46

TEXT..............................................................................46

M/P ................................................................................47

P+ ..................................................................................47

P- ...................................................................................48

RECALL.........................................................................48

FAV................................................................................48

INFO ..............................................................................48

PAUSE...........................................................................48

0 - Sleep timer ...............................................................49

Uninstalling the receiver .............................................50

Cleaning........................................................................50

Tips & tricks/trouble shooting ....................................51

Disposal........................................................................54

Specifications ..............................................................55

Manufacturer ................................................................58

Declaration of conformity ...........................................59

Glossary .......................................................................60

Safety instructions

Please read the safety instructions carefully before

operating the receiver.

Please follow all warnings and instructions on the

equipment and in the operating manual.

Basic safety instructions

Electrical connection

• Separate the receiver from the power source in case of

operational disruptions. Please note: The receiver will

remain live, even if it is turned off with the mains switch

on the rear side.

• Do not expose the receiver to rain or any kind of

humidity to avoid risk of fire and electric shock.

• Never open the casing. Otherwise, there is a risk of

electric shock.

• Connect the receiver only to a professionally installed

mains socket of 100-140V ~, 50-60Hz.

• Pull out the mains plug from the socket if the

equipment is not in use for a longer period of time.

Only pull at the mains plug, not at the cable.

• In case of storms pull out the mains plug of the

receiver and the antenna plug (if any) of the roof

antenna from the socket.

• If foreign bodies or fluids enter the receiver,

immediately pull out the mains plug from the socket.

Ask a qualified person to check the equipment before

operating it again. Otherwise, there is a risk of electric

shock.

Safety instructions

• Ensure that the power source (socket) is easily

accessible.

• Do not bend or crimp the mains cable.

• If the mains cable is damaged, the

receiver must be repaired by an expert before reusing

it. Otherwise, there is a risk of electric shock.

• Never allow children to operate the receiver or to play

with the antenna unit unless supervised.

• Always ask qualified personnel to carry out

maintenance jobs. Otherwise, you are putting yourself

and others at risk.

• Spare parts must be ordered directly from the

manufacturer

• Modifications of the device lead to an extinction of the

manufacturer’s liability.

• Remove the protection films.

Caution!

Information on separation from power source. The

Standby key of this device will not separate the device

completely from the power source. In addition, the

device will draw current. To separate the device

completely from the power source, the mains plug

must be pulled out of the socket.

Safety instructions

Suitable location

• Place the receiver on a stable and even base.

• Avoid proximity to:

- heat sources, like e. g. heaters,

- naked flames, like e. g. candles,

- devices with strong magnetic fields, like e. g.

loudspeakers.

• Never place receptacles filled with liquid (e. g. vases)

on the receiver

• Avoid direct sunlight and places with an extremely high

amount of dust.

• Never cover ventilation slits. Ensure adequate

ventilation of the receiver.

• Do not place any heavy objects on the receiver.

• Humidity may settle in the receiver if it is brought into

hot surroundings from a cold one. In this case, wait for

about an hour before operating the equipment.

• Arrange the mains and antenna cable in such a

manner that no-one can step or trip over them.

Safety instructions

Explanation of safety instructions

The following categories of safety instructions are

included in this operating manual:

Danger!

Instructions with the word DANGER give a warning

against possible personal injuries.

Caution!

Instructions with the word CAUTION give a warning

against possible material or environmental damages.



These instructions contain special information

regarding an economic use of the receiver.

Safety instructions

Appropriate use

The digital terrestrial satellite receiver SL 35 T receives

unencrypted digital terrestrial channels (free-to-air) for

private use. It is exclusively meant for this purpose and

must only be used for the same. This also includes

paying attention to all information contained in this

operating manual, especially in the safety instructions.

Any other usage is considered to be improper and may

lead to material damages and even personal injuries.

Moreover, it will result in the immediate loss of guarantee.

The manufacturer does not bear any liability for damages

caused due to improper use

Scope of supply

 Check the scope of supply after purchase.

The scope of supply may vary according to the type of

the receiver. Please follow the information on the

packaging.

No.

Pieces Description

1 1 Receiver

2 1 Remote control

3 2 Batteries type LR 03/AAA/1.5 V

4 1 SCART cable

– 1 Operating manual (not shown above)

Description

With this receiver you are able to receive unencrypted

digital terrestrial channels (free-to-air) via a house or

indoor antenna.

During the first operation, you will be led through the

menu automatically. Required settings are made or you

are asked for information. However, the receiver can also

search for new channels at a later time as soon as you

initiate the automatic scanning of broadcasting stations.

All receiver settings can be done easily by using the user

interface (menu) on the TV screen.

The multilingual user interface supports following

languages:

• German

• Greek

• Italian

• Portuguese

• Slovenian

• Spanish

• Swedish

• Turkish

• Czech

• Danish

• English

• Finnish

• French

• Dutch

Description

Other features of the equipment:

• Software update via the RS 232 connection on the

rear side of the device

• Short switching time, fast boot process when switching

on the receiver

• Saves the channel last watched (Last Channel

Memory)

• Symbol rate 1 – 35 MS/s and 50 – 860 MHz input

frequency

• 3 keys at the frontage

• Plug & play

• 100–240 V ~, 50/60 Hz mains connection

• Installation assistant, convenient initial installation with

help

• Child Lock

• Automatic scanning of broadcasting stations

• Analogue sound output through Cinch connector

(stereo), volume adjustment possible via remote

control

• Coaxial digital audio output (digital audio)

• 2 Euro SCART connections, one for the TV set and

one for the video set

• TV SCART with FBAS, RGB, and YUV

• Loop-through function for the terrestrial antenna

• Super fast videotext with a memory of 800 pages

• Digital radio reception, background image for radio

(background display)

Description

• Additional channel information is displayed when the

channel is changed.

• LAST CHANNEL MEMORY function

• Screen aspect ratios are set automatically or can be

set manually to 16:9 / 4:3 letterbox

• Multi-functional timer, 8x linked with EPG

• Electronic Programme Guide EPG (up to 14 days in

advance, channel-dependent)

• Automatic selection of the TV standard from

NTSC/PAL with video converter

Connecting the receiver

Connecting the receiver to the antenna

Caution!

Remove all plastic wraps from the receiver before

connecting it to the antenna. Otherwise the receiver

can suffer damages. Danger of overheating.

 Connect the receiver to the antenna by using an

antenna cable.



The antenna cable is not included in the scope of

supply.

Caution!

Connect the receiver to the mains supply only after you

have connected it to all equipment and the antenna

properly. Otherwise, the receiver can suffer damages.

The wire netting and the inner core of the coaxial cable

carry current during operation if the 5V supply voltage

is enabled.

Page is loading ...

Silvercrest SL35T Operation and Safety Notes

Brand: Silvercrest

Model: SL35T

Category: TV set-top boxes

Type: Operation and Safety Notes

Download PDF

report

Silvercrest SL35T Operation and Safety Notes

Silvercrest SL35T Operation and Safety Notes

Related papers

Other documents