Assa Abloy 841C Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Assa Abloy 841C Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Instruktiontill841C,840C,850Coch851C
Dörrlägessensornsplacering
Dörrlägessensornärplaceradunderdatummärkningenstolpen.50dornovanför
regelnoch35dornunderregeln.
Instruktionförattvändafall840C50och850C50
1. Monterabortskruvarna.(passandebitsärT20).Lyftbortlåsstolpen
2. Varförsiktighylsornaochstiftetkanlossna.
3. Demonteraplastbitenöverfallkolven.
4. Vridfallen.
5. Monteraplastbitenöverfallkolven.
6. Monterahylsorna ochstiftet.
7. Monteralåsstolpen.
8. Monteraskruvarna.
Switchochlysdiodsplacering
Förklaringtilllysdioden
Fastsken=Oinitierad
Släck=Initierad
Blink2Hz(blinkning)=Initieradmotannan
DAC
Blink20Hz(flimmrar)=Timeoutvänta360sek
innanupplåsning.
Instructionto841C,840C,850Cand851C
Placementofdoormonitor
Theplacementofthedoormonitorisunderthedatemarkontheforend.
50backsetisabovethehookbolt
35backsetisunderthehookbolt.
Instructiontochangethelatchbolt
1. Unmountthescrews(TorxT20).
2. Becareful
thepinandsocketcanfallout
3. Unmounttheplastic.
4. Turnthelatchbolt
5. Assemblytheplastic
6. Assemblythepinandsocket.
7. Assemblytheforend.
8. Assemblythescrews(TorxT20).
PlacementofswitchandLED

ExplanitionforLED
Steadylight=Factorymode,notinitiated
LEDoff=Initiated
FlashingLED(2Hz)=“WrongDAC”lockalready
initiatedagainstanotherDAC.
FlashingLED(10Hz)=Timeoutwait240sec(4min)
theninitiateDACorresetthelo ck.Seethequick
guide.
/