Control your garage door from your phone anytime,

anywhere! With the Sma Garage Door Opener you

can also use Alexa and Google Voice Assistant to

open and close your garage door on any Wi-Fi

enabled smaphone/tablet in the atomi sma opp

Input: 100-240Vac 50/60Hz 0.15A max

Output: 5Vdc/1A

Input: 5Vdc/1A

1. Know your Wi-Fi network and password.

2. Make sure your mobile device is running:

3. Make sure you’re connected to a 2.4GHz Wi-Fi

network (atomi sma app can’t connect to 5GHz

networks).

The atomi Sma Garage Door Opener can be

installed to control most garage door openers. Visit

atomisma.com/compatible-garage to be sure yours

qualifies.

slide the backing back on.

4. Plug the USB into the Sma Wall Adaptor and

Download the atomi sma app from

number or email address.

Garage Door Opener for five seconds until the

indicator light is flashing rapidly. Then press "Continue".

Enter your Wi-Fi

your device.

1. Now that you have initiated a Wi-Fi connection,

screw on the back of your garage door opener

4. Secure the garage door opener panel back to the

wall and position your Sma Garage Door Opener

packaging to secure the Sma Garage Door

Opener's backing onto the wall.

wall outlet.

Opener" and press the light icon buon. Check if

the device light is turning ON/OFF.

b) Press the camera icon buon. You should receive

a notification with the captured photo.

c) Slide up the switch to open your garage door.

d) Slide down the switch to close your garage door.

If you have problems with any of these steps. see