2. Alden
  3. ASTRA 23

Alden ASTRA 23 User manual

  • Hello! I am an AI chatbot trained to assist you with the Alden ASTRA 23 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Manual
ASTRA 23
Transpondermodication
Stand 02.05.2019
DE UT SC HL AN D
GmbH
Button Layout S.S.C HD
1. ON / OFF
2. Start Dish (up)
3. Close Dish (down)
4. Menü / OK
Step 1
Press Button 1 to switch on the „green“ LED of the S.S.C. HD.
Press Button 1
to switch on the
„green“
LED of the S.S.C. HD.
Step 2
Press Button 4 . The Display will pop up.
Step 3
Press Button 4 to conrm Position 1. „Transp.Mod“
1
Step 4
Press Button 4 to conrm for example „Transpo.No:1“.
• With Button 2 you are able to change the marked Position.
• With Button 3 you will jump to the next Positon oft the Number.
Adjust the Frequenz with the Button 2 / Button 3
into 11934 Mhz.
Step5
2 3
Info: Now the rst Position of the Frequenz (Freq) is ashing.
Step 6
When you have adjust the Frequency correct, confirm with
Button 4.
Press Button 2 und Button3 once at the same Time
Info: Now you will see the Symbol rate. For example “S/R: 27500 KS/s“.
• With Button 2 you are able to change the marked Position.
• With Button 3 you will jump to the next Positon oft the Number.
Adjust the Symbol rate with the Button 2 / Button 3 into 27500 KS/s.
Button 4
Step 7
When you have adjust the Symbol rate (S/R) correct, confirm with
the
Info:
Now you will see the Polarity. For example “Pol: H”.
Change the Value in your Display with the Button 2 or Button 3
into “
V”.
Step8
Push Button 4 to conrm the Polarity.
Info: Now you will see the Fec. For example “Fec: 3/4”.
Change the Value in your Display with the Button 2 or Button 3 into “Fec: 3/4”.
Step 9
Push Button 4 to conrm the Fec.
Info: Now you will see the Mod: For example „DVB-S2”.
Change the Value in your Display with the Button 2 or Button 3 into “DVB-S2”.
Please note! After the changes it can take more Time to nd the Satellite. Depending on
Antenna and Generation oft he Antenna, it can take up to 15 Minutes.
ATTENTION:
Please to not stop the Searchmode by yourself!
If the Antenna will not nd the „Hotbird 13“ Satellite, the Antenna will close automaticly!
Alden Deutschland GmbH • Feldbrügge 14 • 49434 Neuenkirchen-Vörden
Telefon 05493 - 913660 • Telefax 05493 - 913663
[email protected] • www.alden-deutschland.de
Step10
Push Button 4 to conrm the Mod.
Info: The Display turns o.
Step 11
Push Button 1 to switch o the „green“ LED of the S.S.C. HD.
Step 12
Start the Antenna as usual.
Info:
/