Schlage Control Smart Deadbolt FE410F Installation guide

Schlage
Brand
Schlage
Model
Control Smart Deadbolt FE410F
Type
Installation guide

Schlage Control Smart Deadbolt FE410F offers keyless convenience and enhanced security for your home. With its Engage Technology, you can lock or unlock your door remotely using a smartphone app, ensuring peace of mind whether you're at home or away. The smart deadbolt also features a built-in alarm to deter intruders and a backlit keypad for easy access in low-light conditions. Upgrade your home security with the Schlage Control Smart Deadbolt FE410F and experience the future of home access control.

Schlage Control Smart Deadbolt FE410F offers keyless convenience and enhanced security for your home. With its Engage Technology, you can lock or unlock your door remotely using a smartphone app, ensuring peace of mind whether you're at home or away. The smart deadbolt also features a built-in alarm to deter intruders and a backlit keypad for easy access in low-light conditions. Upgrade your home security with the Schlage Control Smart Deadbolt FE410F and experience the future of home access control.

Tools Needed
Tape
Measure
Tape Measure
Pencil
Drill and Drill Bits
Bit Sizes: Z\,”, 1”
Hole Saws
1”, 2Z\,”
Chisel
Hammer
1 Measure door thickness.
If the door is thinner than 1C\,” or thicker than 1C\v”, then the lock will not
t properly on the door.
1C\,” - 1C\v”
Tape
Measure
L A thick door kit is available from
Product Support at 800-847-1864.
2 Mark lock centerlines.
2a Mark bottom centerline on door face, door edge and door
jamb.
38” from nished oor
Tape
Measure
Door Face
Door Edge
Door Jamb
2b Mark top centerline on door face, door edge and door
jamb.
4” or 5Z\x” from
bottom centerline
Tape
Measure
Door Face
Door Edge
Door Jamb
L Locks are ordered as either 4” or 5Z\x”.
3 Prepare cross bores.
3a Measure backset and mark center of holes.
Tape
Measure
2C\v” or 2C\,”
3b Drill holes with hole saw.
2Z\,” Hole Saw
Model FE410F
Schlage Control™ Smart Deadbolt
with Engage Technology
Door Preparation Instructions for Door with No Holes
2
4 Prepare door edge holes.
4a Measure and mark Z\x door thickness.
Tape
Measure
Z\x” Door Thickness
4b Drill holes in door edge.
1” Drill Bit or Hole Saw
5 Mortise for latch and bolt.
5a Insert latch into door edge hole. Trace latch faceplate and
mark holes.
5b Remove latch and bolt. Drill four Z\,” pilot holes.
Z\,” Drill Bit
5c Use chisel and hammer to create mortise for latch and
bolt.
6 Measure, mark and drill holes in door jamb for strikes.
6a Mark center for strike holes exactly opposite latch and bolt
holes.
© Allegion 2016
FE410F door prep no holes-b Rev. 05/16-a
6b For the bolt strike, measure, mark and drill two (2) 1” holes,
1Z\v” deep, as shown. Chisel out excess material on the
sides.
Z\v”
Z\v”
1” Drill Bit or Hole Saw
6c For the latch strike, measure, mark and drill two (2) 1”
holes, Z\x” deep, as shown. Chisel out excess material on
the sides.
Z\v”
Z\v”
1” Drill Bit or Hole Saw
7 Mortise for latch and bolt strike.
7a Trace latch strike and bolt reinforcement plate. Mark holes.
7b Drill six (6) Z\,” pilot holes.
Z\,” Drill Bit
7c Use chisel and hammer to create mortise for strikes and
reinforcement plate.
L Mortise for latch strike extends all the way to the edge of the
jab to allow for the latch lip.
Product Support
800-847-1864 www.allegion.com
  • Page 1 1
  • Page 2 2
  • Page 3 3

Schlage Control Smart Deadbolt FE410F Installation guide

Schlage
Brand
Schlage
Model
Control Smart Deadbolt FE410F
Type
Installation guide

Schlage Control Smart Deadbolt FE410F offers keyless convenience and enhanced security for your home. With its Engage Technology, you can lock or unlock your door remotely using a smartphone app, ensuring peace of mind whether you're at home or away. The smart deadbolt also features a built-in alarm to deter intruders and a backlit keypad for easy access in low-light conditions. Upgrade your home security with the Schlage Control Smart Deadbolt FE410F and experience the future of home access control.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents