CT708U(G)
Commercial Flushometer Top Spud
Wall-Hung Toilet – 1.0/1.28/1.6 GPF
FEATURES
• Wall-mounted
• Elongated front bowl
• Optional CeFiONtect
™
glaze prevents debris from
sticking to ceramic surfaces, making them
easier to clean
• Clear glazed trapway coating
MODELS
• CT708U
Commercial wall-mounted toilet with 1-1/2' top
spud inlet, less seat
• CT708UG
Commercial wall-mounted toilet with 1-1/2' top
spud inlet, less seat with CeFiONtect ceramic glaze
PRODUCT SPECIFICATION
The wall-mounted, low consumption siphon jet flushing
toilet shall be 1.0, 1.28, or 1.6 GPF (3.8, 4.8, or 6.0 LPF)
when paired with a flush valve of corresponding flush
volume. Toilet shall have optional CeFiONtect ceramic
glaze. Toilet can be mounted at ADA height. Toilet shall
be TOTO Model CT708U______.
COLORS/FINISHES
• Standard
#01 Cotton
CODES/STANDARDS
ADDITIONAL ITEMS
• SC534 seat
• SC134 seat
• THU111 Retro-fit mounting bolt cap set (4 pcs)
FLUSH VALVES
ECOPOWER
®
MANUAL
Exposed Exposed
TET1UA32#CP 1.0 GPF TMT1LN32#CP 1.28 GPF
TET1LA32#CP 1.28 GPF TMT1NNC-32 1.6 GPF
TET1GA32#CP 1.6 GPF
Exposed 24" Breaker
TET6UA32#CP 1.0 GPF
TET6LA32#CP 1.28 GPF
TET6GA32#CP 1.6 GPF
Concealed 14" x 12"
TET2UA32#CP 1.0 GPF
TET2LA32#SS 1.28 GPF
TET2GA32#SS 1.6 GPF
Concealed 4" x 4"
TET3UA32#SS 1.0 GPF
TET3LA32#SS 1.28 GPF
TET3GA32#SS 1.6 GPF
CeFiONtect
Flush valve sold separately
• Meets and exceeds ASME A112.19.2/CSA B45.1
• Certifications: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
• ADA compliant
Certified by
IAPMO R&T
CT708U(G)
Commercial Flushometer Top Spud
Wall-Hung Toilet – 1.0/1.28/1.6 GPF
# SS-01225 v.02Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
18-1/2" (470mm)
24-7/8" (632mm)
9"
(229mm)
15-3/4"* (400mm)
5-1/2"
(140mm)
*6-3/8"
(162mm)
11-1/4"
(285mm)
12-3/4"
(323mm)
3-1/2"
(90mm)
2-3/8" (59mm)
3-7/8"
(99mm)
7-1/2"
(190mm)
Finished Wall (Must be flat surface)
Finished Floor
*16"
(406mm)
*17"
(432mm)
*Suggested
Dimension
1/16"
(1.6mm)
Wall
Gap
18-1/2" (470mm)
24-7/8" (632mm)
9"
(229mm)
5-1/2"
(140mm)
*6-3/8"
(162mm)
*16"
(406mm)
Finished Wall (Must be flat surface)
Finished Floor
2-3/4"
(70mm)
1/16"
(1.6mm)
Wall
Gap
15-3/8" (390mm)
12-3/4"
(323mm)
*4-3/4"
(121mm)
*Suggested
Dimension
11-1/2"
(292mm)
2-3/8"
(59mm)
7-1/2"
(190mm)
1" N.P.T
. supply for
Flushometer valve
1-1/2"
(38mm)
*17"
(432mm)
CT708E(G)
CT708EV(G)
1-7/8"
(48mm)
Standard
bolt cap
Wall
China
Retrofit
bolt cap
Note: If carrier bolt doesn’t extend/or is
flush with china, then use retrofit caps
THU111 (sold separately).
finished wall
Installation surface of bowl
has 1/8” wall gap
across entire surface.
Proper Installation
finished wall
Installation surface of bowl
has 1/16” wall gap
across entire surface.
Top and Bottom mounting
surfaces must be in
the same vertical plane.
finished wall
Proper Installation Improper Installation
Ø Uneven Wall Gap
Baseboard
China
Wall
Steel
Washer
Rubber Washer
(supplied)
finished wall
Installation surface of bowl
has 1/16” wall gap
across entire surface.
Top and Bottom mounting
surfaces must be in
the same vertical plane.
finished wall
Proper Installation Improper Installation
Ø Uneven Wall Gap
Baseboard
finished wall
Installation surface of bowl
has 1/16” wall gap
across entire surface.
Top and Bottom mounting
surfaces must be in
the same vertical plane.
finished wall
Proper Installation Improper Installation
Ø Uneven Wall Gap
Baseboard
INSTALLATION NOTES
DIMENSIONS
Spuds are unique for TOTO product. For replacement
spuds, contact TOTO for part number THU073R
These dimensions and specifications are subject to change without notice
SPECIFICATIONS
Water Use
1.0/1.28/1.6 GPF (3.8/4.8/6.0 LPF)
Flush System
Siphon Jet Flushing Action
Water Surface
12" x 9-1/4"
Water
Pressure
Min: 35 psi (Flowing)
Max: 80 psi (Static)
Min. Flow Rate
24 GPM
Trap Diameter
2-1/8"
Trap Seal
2-5/8"
Material
Vitreous China
Warranty
One Year Limited Warranty
Shipping
Weight
56 lbs
Shipping
Dimensions
26-1/4"L x 15-5/8" W x 16"H
18-1/2" (470mm)
24- 7/8" (632mm)
9"
(229mm)
5-1/2"
(
140mm)
*6-3/8"
(162mm)
*16"
(406mm)
Finished Wall (Must be flat surface)
Finished Floor
2- 3/4"
(70mm)
1/16"
(1.7mm)
Wall
Gap
15- 3/8" (390mm)
12- 3/4"
(323mm)
*4- 3/4"
(121mm)
*Suggested
Dimension
11-1/2"
(292mm)
2- 3/8"
(59mm)
7-1/2"
(190mm)
1" N.P.T. supply for
Flushometer valve
1-1/2"
(38mm)
*17"
(432mm)
/