Spacer Kit (Model 5170) Installation Instructions
Thank you for purchasing this spacer kit hardware for your premium Mailboxes. We know you'll be satisfied with the years of
service it will provide. If you have any questions about how to mount or use this kit. Please call us directly at (310) 374-5700 or
contact us at [email protected].
!
WARNING - Spreader plates not for use with products from any other manufacturer - may collapse.
Designed to support the weight of Architectural Mailboxes products only.
1
TO MOUNT A MAILBOX WITH A
RECESSED BOTTOM
Attach each mailbox to the
spreader using 4, 2” hex
bolts, 4 nylon spacers
(select the size that works
best for your mailbox
depth), You will also need 8
washers and 4nuts that
came with your speader
plate.
Assembly Instructions
Hardware (included)
Tools (not included)
Two open end wrenches
- or -
x 8, 2” hex bolts
R
x 8, 7/8” nylon spacers
x 8, 1 1/4” nylon spacers
(310) 374-5700 www.architecturalmailboxes.com
©
2018, Architectural Mailboxes Rev I
Spacer Kit (Model 5170) Installation Instructions
Thank you for purchasing this spacer kit hardware for your premium Mailboxes. We know you'll be satisfied with the years of
service it will provide. If you have any questions about how to mount or use this kit. Please call us directly at (310) 374-5700 or
contact us at [email protected].
!
WARNING - Spreader plates not for use with products from any other manufacturer - may collapse.
Designed to support the weight of Architectural Mailboxes products only.
1
TO MOUNT A MAILBOX WITH A
RECESSED BOTTOM
Attach each mailbox to the
spreader using 4, 2” hex
bolts, 4 nylon spacers
(select the size that works
best for your mailbox
depth), You will also need 8
washers and 4nuts that
came with your speader
plate.
Assembly Instructions
Hardware (included)
Tools (not included)
Two open end wrenches
- or -
x 8, 2” hex bolts
R
x 8, 7/8” nylon spacers
x 8, 1 1/4” nylon spacers
(310) 374-5700 www.architecturalmailboxes.com
©
2018, Architectural Mailboxes Rev I
/
