Contec CPS-MC341Q-ADSC1-111 Owner's manual

Setup Manual

CONTENTS

CONPROSYS series

Integrated Type

Introduction .................................................................. 4

Safety Precautions ...................................................... 7

Product Nomenclature and Function................ 10

Hardware Setup......................................................... 17

CONPROSYS WEB Setting ..................................... 35

Set the Computer Network ................................... 39

Installation ................................................................... 49

Connecting with PLC and CODESYS .................. 55

Appendix ...................................................................... 68

— 2 —

Table of Contents

Introduction ....................................................................... 4

1. Related Manuals ...................................................................................................................................................... 5

2. Online Help ............................................................................................................................................................... 6

Safety Precautions ............................................................. 7

1. Safety Information.................................................................................................................................................. 8

2. Handling Precautions ............................................................................................................................................ 9

Product Nomenclature and Function ............................ 10

1. Nomenclature of Product Components ..................................................................................................... 11

2. Description of Product Components ........................................................................................................... 13

1. Power Connector ........................................................................................................................................... 13

2. Antenna Connector ...................................................................................................................................... 14

3. Digital Input / Counter Input / Digital Output Connecter ............................................................ 15

4. Analog Input Connecter ............................................................................................................................. 16

5. RS-422A/485Connector .............................................................................................................................. 16

Hardware Setup ............................................................... 17

1. Insert SIM Card ..................................................................................................................................................... 18

2. Set Antenna ........................................................................................................................................................... 20

1. 3G model .......................................................................................................................................................... 20

2. 920MHz model............................................................................................................................................... 20

3. Set DIP switch........................................................................................................................................................ 21

1. CPS-MC341-DS11-111, CPS-MC341-A1-111, CPS-PC341EC-1-9201 ...................................... 21

2. CPS-MC341-ADSC1-931, CPS-MG341-ADSC1-931 ........................................................................ 22

3. CPS-MC341-ADSC1-111, CPS-MG341-ADSC1-111 ........................................................................ 23

4. CPS-MC341-ADSC2-111 ............................................................................................................................ 24

5. CPS-MC341G-ADSC1-110, CPS-MC341G-ADSC1-111, CPS-MG341G-ADSC1-111, CPS-MC341-

DS1-111 ................................................................................................................................................................... 26

6. CPS-MC341-DS2-111, CPS-MC341-DS2-911 .................................................................................... 27

7. CPS-MC341G-ADSC1-930 ......................................................................................................................... 29

4. Set Data Transfer Mode .................................................................................................................................... 30

8. RS-422A/485 ................................................................................................................................................... 30

CONPROSYS WEB Setting ............................................... 35

1. CONPROSYS WEB Setting Outline ................................................................................................................ 36

1. Compatible Web Browser .......................................................................................................................... 36

2. CONPROSYS WEB Setting Operation.................................................................................................... 36

2. Menu Function List ............................................................................................................................................. 37

— 3 —

Table of Contents

Set the Computer Network ............................................ 39

1. Items to Set Up ..................................................................................................................................................... 40

2. Connectors for Setup ......................................................................................................................................... 41

3. Connect with a PC ............................................................................................................................................... 42

4. Set the Computer Network.............................................................................................................................. 43

1. Computer Network Setting Procedure (for Windows 10) ............................................................. 43

5. Check Communication ...................................................................................................................................... 46

6. Check Operation .................................................................................................................................................. 47

Installation ........................................................................ 49

1. Install the Product ............................................................................................................................................... 50

1. Installation Conditions ................................................................................................................................ 50

2. Mounting on/Removing from a DIN Rail ............................................................................................ 53

3. Mounting on the Wall ................................................................................................................................. 54

Connecting with PLC and CODESYS .............................. 55

1. Connecting to pre-installed PLC system .................................................................................................... 56

1. PLC connection .............................................................................................................................................. 56

2. Link config........................................................................................................................................................ 57

3. CPU configuration......................................................................................................................................... 59

4. Device configuration.................................................................................................................................... 61

2. Using CODESYS .................................................................................................................................................... 63

1. How to obtain the CODESYS development environment ............................................................. 63

2. Installation of CODESYS Package............................................................................................................ 65

3. Connecting to pre-installed system (PLC controller) ...................................................................... 66

Appendix .......................................................................... 68

1. Useful functions ................................................................................................................................................... 69

2. Easy Data Process and Control ....................................................................................................................... 70

1. Task processing function (CONPROSYS VTC)..................................................................................... 70

2. Work Area ........................................................................................................................................................ 70

3. Create Processing Tasks .............................................................................................................................. 71

4. Basic Procedure for Creating Processing Tasks ................................................................................. 71

3. Monitoring Edit .................................................................................................................................................... 75

1. Monitoring function (CONPROSYS HMI) ............................................................................................. 75

2. Work Areas ...................................................................................................................................................... 75

3. Create a Monitoring Screen ...................................................................................................................... 76

4. Basic Procedure for Creating a Monitoring Screen ......................................................................... 76

— 4 —

Introduction

This setup manual provides information on the basic

settings and installations of the product.

This chapter lists the related manuals and the purposes.

—

Introduction

—

Setup Manual Integrated Type

— 5 —

1. Related Manuals

The manuals related to the product are listed below.

Read them as necessary along with this document.

 Must Read the Followings.

Name

Purpose

Contents

How to get

Product Guide

Must read this after opening the

package.

This lists the product configuration

and describes the precautions.

Included in the package

(Printed matter)

Setup Manual

Read this when setting up the

product.

This describes the required items for

setup and configuration procedure.

Download from

the Contec

website (PDF)

Reference Manual

(Hardware)

Read this when operating the

product.

This describes the hardware aspects

such as functions and settings.

Download from

the Contec

website (PDF)

Reference Manual

(Software)

(or System Setup Guide)

Read this when setting up the

"CONPROSYS WEB Setting"

This describes how to set each

function of "CONPROSYS WEB

Setting".

Download from

the Contec

website (PDF)

 Read the Followings as Necessary.

Name

Purpose

Contents

How to get

CONPROSYS Cloud Data

Service 2 (CDS2) Manual

Read this to understand the

outline of the CONPROSYS

Cloud Data Service 2.

This describes the outline and

specification of the CONPROSYS Cloud

Data Service 2 as well as how to

operate the product.

Download from

the Contec

website (PDF)

CONPROSYS Cloud Data

Service 2 Concise Manual

Read this when using the

CONPROSYS Cloud Data Service

2.

This describes the procedure to start

monitoring measured data in Cloud

Data Service 2.

Download from

the Contec

website (PDF)

CONPROSYS Java Applet

Application Guide

(For firmware version 2.00

or earlier)

Read this when using the

system setting function of Java

Applet application version.

This describes how to create a

monitoring page and processing task

with the system setting function in

Java Applet application version.

Download from

the Contec

website (PDF)

SIM Card Manual

(With 3G model)

Read this when using the

product with SIM card.

This describes the procedure to start

sending data to Cloud server from

M2M controller.

Download from

the

Contec

website (PDF)

 Download Manuals

Download the manuals accordingly from the following URL.

Download

https://www.contec.com/download/

—

Introduction

—

Setup Manual Integrated Type

— 6 —

2. Online Help

We offer the detailed information on “CONPROSYS VTC” for assembling processing tasks such as

calculation and control as well as on “CONPROSYS HMI” for operating and editing the monitoring

screen through the Online Help.

Consult the Online Help as necessary.

 CONPROSYS VTC (Visual Task Control).

Online Help

http://data.conprosys.com/help/task/V1/en/

 CONPROSYS HMI (Human Machine Interface)

Online Help

http://data.conprosys.com/help/hmi/V1/en/

— 7 —

Safety Precautions

Understand the following definitions and precautions to

use the product safely.

Never fail to read them before using the product.

—

Safety Precautions

—

Setup Manual Integrated Type

— 8 —

1. Safety Information

This document provides safety information using the following symbols to prevent accidents

resulting in injury or death and the destruction of equipment and resources.

Understand the meanings of these labels to operate the equipment safely.

DANGER

DANGER indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

WARNING

WARNING indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate

injury or in property

damage.

—

Safety Precautions

—

Setup Manual Integrated Type

— 9 —

2. Handling Precautions

Refer to [Handling Precautions] in the “Reference Manual (Hard ware)” of the each model for handling

details.

— 10 —

Product Nomenclature

and Function

This chapter describes product component names and their

functions, pin assignment of each connector.

—

Product Nomenclature and Function

—

Setup Manual Integrated Type

— 11 —

1. Nomenclature of Product Components

Component names of the product are shown in the figure below.

No.

Name

Function

1

Power Connector

This is a connector for power. Use the 3-pin connector included in

the package.

2

Antenna Connector

This is a connector to connect an antenna. Use the supplied

connector or optional one.

3

SIM Card Slot

This is a slot for inserting SIM card.

4

3G LED

This displays the intensity of the signal reception.

5

Debug Connector

Do not use this.

6

SD Card Slot

This a slot for inserting SD card to store data.

7

USB Port

This is a TYPE-A USB port.

8

RS-232C Serial Port

This is a RS-232C serial port. (male)

9

LED Indicator

This indicates status of the product.

10

Reset Switch

This resets the product.

11

Shutdown Switch

This shuts down the product.

12

DIP Switch

This is used for system setup and RS-422A/485 setup.

13

LAN Port

This is a connector for LAN.

14

Digital Input/Counter

Input/Digital Output

Connector

This is a connector for digital input/counter input/digital output.

(Use the 10-pin connector included in the package)

CPS-MC341-ADSC2-111

—

Product Nomenclature and Function

—

Setup Manual Integrated Type

— 12 —

No.

Name

Function

15

Analog Input Connector

This is a connector for analog input.

(Use the 3-pin connector included in the package)

16

RS-422A/485 Connector

This is a connector for RS-422A/485 communication.

(Use the 5-pin connector included in the package)

—

Product Nomenclature and Function

—

Setup Manual Integrated Type

— 13 —

2. Description of Product Components

Main connectors used in the product are described.

Refer to “Reference Manual (Hard ware)” of each model for unlisted connectors.

1. Power Connector

Use the 3-pin connector, included in the package, to connect to external power.

Pin Assignment

Pin No.

Signal Name

Description

1

FG

Frame ground

2

V-

Ground

3

V+

24VDC

—

Product Nomenclature and Function

—

Setup Manual Integrated Type

— 14 —

2. Antenna Connector

This is a connector to connect a 3G antenna included in the package or an optional one.

This is a connector to connect a 920MHz antenna included in the package or an optional one.

—

Product Nomenclature and Function

—

Setup Manual Integrated Type

— 15 —

3. Digital Input / Counter Input / Digital Output

Connecter

This product has 4 channels of digital Input and 2 channels of digital output.

You can switch DI2 and DI3 to counter input and operate them.

Use the 10-pin connector, included in the package, to connect to external power.

Pin Assignment

No.

Name

Function

1

DI_ACOM

This pin is left unconnected.

2

DI0

This indicates the input signals of channel 0. It connects the output signals

from the other devices.

3

DI1

This indicates the input signals of channel 1. It connects the output signals

from the other devices.

4

DI2/CNT0

This indicates digital input signals of channel 2 and counter signals of

channel 0. It connects the output signals from the other devices.

5

DI3/CNT1

This indicates digital input signals of channel 3 and counter signals of

channel 1. It connects the output signals from the other devices.

6

DI_BCOM

This indicates the ground and shares with 4 channels of input signals.

7

DO0+

This indicates the output signals (+) of channel 0. It connects the input

signals (+) from the other devices.

8

DO0-

This indicates the output signals (-) of channel 0. It connects the input

signals (-) from the other devices.

9

DO1+

This indicates the output signals (+) of channel 1. It connects the input

signals (+) from the other devices.

10

DO1-

This indicates the output signals (-) of channel 1. It connects the input

signals (-) from the other devices.

—

Product Nomenclature and Function

—

Setup Manual Integrated Type

— 16 —

4. Analog Input Connecter

This product has 2 channels of analog input that supports isolated inter-channel.

Use the 3-pin connector, included in the package, to connect to external power.

Pin Assignment

No.

Signal Name

Description

1

AI+

Analog input signals (+).

2

AI-

Analog input signals (-).

3

AGND

Analog ground.

5. RS-422A/485Connector

This product has 1 port of RS-422A/485 communication.

Use the 5-pin connector, included in the package, to connect to external power.

Pin Assignment

No.

Signal Name

Description

1

TX+

Transmission data (+)

2

TX-

Transmission data (-)

3

RX+

Receptions data (+)

4

RX-

Receptions data (-)

5

SG

Signal ground

1

2

3

1

2

3

— 17 —

Hardware Setup

This chapter describes how to set hardware including

supplied items and switches.

—

Hardware Setup

—

Setup Manual Integrated Type

— 18 —

1. Insert SIM Card

When communicating through 3G network with SIM card, follow the steps described below to insert

SIM card.

SIM card is required individually.

Visit the Contec website to find the compatible card with the product.

Website

https://www.contec.com/

1 Unfasten the screw of the cover.

(Card cover is attached to the product upon shipping).

2 Slide the card cover to remove it.

3 With the terminal side faced up (see the figure), insert the SIM card all the way into the slot.

Terminal side

face up

—

Hardware Setup

—

Setup Manual Integrated Type

— 19 —

CAUTION

 Use a standard size (miniSIM) SIM card.

Standard SIM size : 25x15(mm)

 Do not use a Micro or Nano size SIM card with an adapter to make it as a standard SIM card.

4 Insert the catch of the SD cover into the opening shown in the figure below.

5 Fasten with a screw.

*Reverse the procedure described in the "Insert SIM card "to remove the card.

Catch

—

Hardware Setup

—

Setup Manual Integrated Type

— 20 —

2. Set Antenna

1. 3G model

Product model: CPS-MC341G-ADSC1-110, CPS-MC341G-ADSC1-111, CPS-MG341G-ADSC1-111,

CPS-MG341G-ADSC1-930

Set the supplied antenna to the antenna connector. Turn the antenna in the direction of the arrow

shown to fasten.

2. 920MHz model

Product model: CPS-MC341Q-ADSC1-111

Set the supplied antenna to the antenna connector. Turn the antenna in the direction of the arrow

shown to fasten.

CAUTION

Double-check whether the antenna has been securely fastened and connected.

Page is loading ...

Contec CPS-MC341Q-ADSC1-111 Owner's manual

Contec CPS-MC341Q-ADSC1-111 Owner's manual

Related papers

Other documents