Hagerco 4500/4600 Dummy Push Pad - 4500/4600 Dummy Push Pad Installation guide

Hagerco
Brand
Hagerco
Model
4500/4600 Dummy Push Pad - 4500/4600 Dummy Push Pad
Type
Installation guide
Fasteners Included (shown to scale)
Push Bar
Device Cover
End Cap
Removable End Cap Bracket
Fixed End Cap Bracket
End Cap
#12 x 1 1/4" Wood Screw
Quantity: 4
1/4-20 x 1 5/8" Sleeve Bolt
Quantity: 4
M4 x 0.7 x 6mm Flat Head Machine Screw
Quantity: 4
4500D Dummy Push Pad Exit Device
Metal Surface Mounting
Wood Surface Mounting
Through Bolting
For Wood doors, drill 1/8" pilot hole.
For Metal doors, tap drill with a #7
bit. Tap 1/4"-20.
Drill 5/16" thru from device
side. Drill 3/8" from other
side (pull side).
Check building and fire
codes to see if your
application requires the
use of sleeve nuts and bolts.
Component Parts
1/4"-20 x 3/4" Pan Head Machine Screw
Quantity: 4
4500 Series Dummy Push Pad Exit Device
Installation Instructions
I-ED01291
REV: - REV DATE: 27Jan2012
Page 1 of 2
DEVICES COVERED IN THESE INSTRUCTIONS
OVERVIEW
TOOLS REQUIRED
1
3
16
"
29.97mm
1
5
8
"
41.66mm
19
32
"
14.86mm
1. MARK DOOR AND DRILL MOUNTING HOLES
Mark centerline of exit device, typically 40"
from finished floor. Mark and drill holes as
shown below. These holes are the mounting
holes for the fixed end cap bracket.
C
L
of Device
(40" off of
finished floor)
2. INSTALL DEVICE ON DOOR
Mount the device using the two supplied screws
3. INSTALL SCREWS ON OPPOSITE SIDE
Mark the hole locations by holding the removable end cap bracket up against
the door. Make sure the exit device is level before inserting the end cap bracket
lip intothe exit device body. Mark and drill/tap holes. Install the end cap bracket
and both end caps.
For metal doors drill and tap for 1/4"-20 machine
•
screws.
For wood doors pre-drill 1/8" pilot holes.
•
If using sex bolts, drill 5/16" clearance holes
•
on push side of door and 3/8" holes on pull side.
4500 Series Dummy Push Pad Exit Device
Installation Instructions
I-ED01291
REV: - REV DATE: 27Jan2012
Page 2 of 2
  • Page 1 1
  • Page 2 2

Hagerco 4500/4600 Dummy Push Pad - 4500/4600 Dummy Push Pad Installation guide

Hagerco
Brand
Hagerco
Model
4500/4600 Dummy Push Pad - 4500/4600 Dummy Push Pad
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents