APART Apart MPLT62 User manual

Apart MPLT62
APART
Brand
APART
Model
Apart MPLT62
Category
Car speakers
Type
User manual
2-WAY MUSIC PROJECTOR
COLOUR MPLT32 MPLT32 MPLT62 MPLT62
WHITE 4 WATTS 2K5 Ω 8 WATTS 1K3 Ω
GREEN 8 WATTS 1K2 Ω 16 WATTS 625 Ω
YELLOW 16 WATTS 625 Ω 32 WATTS 312 Ω
RED 32 WATTS 312 Ω 62 WATTS 161 Ω
BLACK COMMON COMMON
MPLT32 / MPLT62
WWW.APART-AUDIO.COM INFO@APART-AUDIO.COM
● Type : 2 way exponential horn, long throw
● Woofer : 6.5 inch cone type
● Tweeter : 1 inch horn driver
● Standard colour : light gray
● Rated power handling RMS : 32 W @ 100 volt
(model32)
● Rated power handling RMS : 62 W @ 100 volt (model62)
● Transformer power taps : 32-16-8-4 W @ 100V (model32)
● Transformer power taps : 62-32-16-8 W @ 100V(model62)
● SPL 1W/1m: 106 dB
● SPL max 120dB (model32)
● SPL max 123dB (model62)
● Frequency range: 75Hz - 18 kHz
● Dispersion (H x V): 110° x 80°
● IP Rating: 66
● Dim. without bracket (mm) HxWxL: 250 x 360 x 290
● Bracket W x D (mm): 285 x 210
● Weight including bracket : 4.90 Kg (model32)
● Weight including bracket : 5.00 Kg (model62)
● Mounting holes : 3 x Ø 10 mm, 60 mm spacing
Technical Specifications
The MPLT is a 2 way music projector with long throw output performance in order to bring
you quality sound over long distances and in wide areas. Thanks to the well-considered
coverage range, high sensitivity, high output, low distortion and extended frequency response,
this horn loaded 2 way speaker is the ideal loudspeaker for outdoor applications such as
recreational facilities, schools, parking facilities, as well as large indoor applications such as
sports centers, airports, exhibition halls ...
Compared to normal horns and sound projectors, our proprietary designed APart MPLT32
and MPLT62 have a very clear and high quality sound to make it useful for quality music
reproduction, paging or voice alarm with perfect intelligibility, or even alarm tones.
The MPLT’s cabinet is made of high impact ABS, supplied with a strong aluminium bracket
to avoid corrosion, making it fully weatherproof, according to IEC IP-66 Standards. The loudspeaker is equipped with a high
quality 100 volt transformer with several power taps. The standard colour is light grey. From 12 pieces upward, the speaker
can be supplied optionally in any RAL colour (Ref: PAINTMPLT).
Power Tappings
62
62
31 31 15 15 7.5 7.5
+
+
+ + + + +231 Watts =
240 Watts amplifi er
Amplifi er power must be higher than total power of all speakers.
Het versterkervermogen moet hoger zijn dan de som van de vermogens van de luidsprekers.
La puissance de l’amplifi cateur doit etre plus élevée que la puissance totale des haut parleurs.
100 Volt Technology
Mounting the loudspeaker
An aluminium mounting bracket for mounting is included in the packing. The bracket allows you to rotate the speaker
over a range of more than 180 degrees. Securely mount the bracket to a wall or other solid surface.
Connect the 100V speaker line to the connector accessible behind the weatherproof cover at the back and make sure
to securely tighten the cable strain relief.
to avoid corrosion, making it fully weatherproof, according to IEC IP-66 Standards. The loudspeaker is equipped with a high
  • Page 1 1

APART Apart MPLT62 User manual

Apart MPLT62
APART
Brand
APART
Model
Apart MPLT62
Category
Car speakers
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents