Figure 2. Model T31830/T31831 Inventory.
B
A
C
D
E
F
Figure 1. Model T31830/T31831 Workbench
Stands.
*Shown with optional T1252 Beech Workbench Top
*Shown with optional T1253 Beech Workbench Top
T31830
T31831
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL T31830/T31831
WORKBENCH STAND
INSTRUCTIONS
Introduction
These workbench stands are designed to be used
with solid wood workbench tops, and are ideal for
close-in detail work, such as soldering, assembly,
gunsmithing, etc. Both stands feature all-steel
frame construction and re-inforced corners.
COPYRIGHT © FEBRUARY, 2020 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 01/20) #KS20955 PRINTED IN TAIWAN
V1.02.20
Description Qty
A. End Frames ................................................. 2
B.
Upper Supports ........................................... 2
C.
Lower Support ............................................. 1
D.
Rubber Feet M10-1.5 x 35 ........................... 4
E.
Hardware Bag
—External Corner Braces ........................... 6
— Internal Corner Braces ............................. 6
—Button Hd Cap Screws M8-1.25 x 55
.... 22
— Flat Washers 8mm ................................. 40
— Lock Nuts M8-1.25 ..................................18
—Open-End Wrench 13 x 14mm
................ 1
—Hex Wrench 5mm
.................................... 1
F.
Steel Bars
5
⁄8" x 11
3
⁄4" .................................. 8
Inventory (Figure 2)
Specifications
• Workbench Stand (Length x Width)
—T31830 ......................................46
1
⁄2" x 20"
—T31831 ......................................64
1
⁄2" x 20"
• Height .................................................... 35
1
⁄2"
• Maximum Weight Capacity .............2500 lbs.
• Approximate Assembly Time ........30 Minutes
Figure 3. End frame attached to workbench top.
x 1
End Frame
End of
Workbench Top
Figure 4. Upper support attached to workbench
top.
x 1
Side of
Workbench Top
Upper
Support
Figure 5. End frame and upper support secured
together with corner braces.
x 3
End Frame
Upper
Support
External
Corner
Brace
Internal
Corner
Brace
-2-
Model T31830/T31831 (Mfd. Since 01/20)
Assembly
4. Secure end frames and upper supports with
(4) external corner braces and (4) internal
corner braces, using (3) M8-1.25 x 55 button
head cap screws, (6) 8mm flat washers, and
(3) M8-1.25 lock nuts for each corner (see
Figure 5). DO NOT fully tighten fasteners at
this time.
To assemble workbench stand:
1.
Lay workbench top upside-down on a
protected surface, such as cardboard or a
blanket.
2.
Attach each end frame to workbench top with
(1) M8-1.25 x 55 button head cap screw and
(1) 8mm flat washer (see Figure 3). DO NOT
fully tighten fasteners at this time.
The Model T31830/T31831 Workbench Stands
can be used with many different types of work-
bench tops, but they are best paired with Grizzly
Model T1252/T1253 Beech Workbench Tops,
which include threaded mounting holes aligned
with the mounting points on the T31830/T31831
frames.
— If you are using a Grizzly Model T1252/
T1253 Beech Workbench Top, proceed to
Step 1.
— If you choose to use your own workbench
top, complete Steps 4–6 BEFORE per-
forming Steps 1–3. Proceed to Step 7
once all previous steps have been com-
pleted.
3.
Attach each upper support to workbench top
with (1) M8-1.25 x 55 button head cap screw
and (1) 8mm flat washer (see Figure 4). DO
NOT fully tighten fasteners at this time.
Figure 6. End frame and lower support secured
together with corner braces.
End Frame
x 3
Lower
Support
External
Corner
Brace
Internal
Corner
Brace
Figure 7. Adjustable feet attached.
End Frame
Rubber
Foot
Figure 8. Steel bars inserted.
End Support
Frame
Steel
Bars
Model T31830/T31831 (Mfd. Since 01/20)
-3-
5. Secure end frames and lower support with
(2) external corner braces and (2) internal
corner braces, using (3) M8-1.25 x 55 button
head cap screws, (6) 8mm flat washers, and
(3) M8-1.25 lock nuts for each corner (see
Figure 6). DO NOT fully tighten fasteners at
this time.
6.
Thread (4) rubber feet into bottoms of end
frames (see Figure 7).
7.
Turn workbench upright and make sure it is
centered over end frames and supports (NOT
leaning to one side or the other), then fully
tighten all fasteners.
8.
Adjust feet as necessary to level table. Verify
workbench sits firmly on ground, and does
not wobble.
Note: Lay a level across the workbench
top from side-to-side and end-to-end when
adjusting feet.
9.
Insert steel bars through end frames as
desired (see Figure 8).
Note: Each end frame has several
holes, which allows for numerous shelving
and racking configurations.
order online at www.grizzly.com or call 1-800-523-4777
Figure 10. Model T1253 Beech Workbench Top.
Figure 9. Model T1252 Beech Workbench Top.
Figure 11. Heavy Duty Anti-Fatigue Mat.
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
-4-
Model T31830/T31831 (Mfd. Since 01/20)
Accessories
For T31830:
T1252—Beech Workbench Top 48" x 25"
A solid beechwood top for the T31830 workbench
stand. 1
3
⁄4" thick and laminated wood for long life.
T10456—Heavy Duty Anti-Fatigue Mat
Don't let weary legs and feet limit your shop time.
This Heavy Duty Anti-Fatigue Mat features bev-
eled edges and a no-slip tread for safety and
comfort. Open hole design allows liquids to drain
through, so it's perfect for wet or oily conditions.
Measures 3' wide x 5' long x
3
⁄8" thick. Buy one for
every machine workstation!
For T31831:
T1253—Beech Workbench Top 72" x 25"
A solid beechwood top for the T31831 workbench
stand. 1
3
⁄4" thick and laminated wood for long life.
6
7
8
3
5
7
8
7
8
5
2
10
2
4
11
9
8
6
12
13
7
8
5
5
7
8
7
8
9
8
3
9
8
6
9
8
9
8
7
8
9
8
7
8
REF PART # DESCRIPTION REF PART # DESCRIPTION
2 PT31830002 END FRAME 8 PT31830008 FLAT WASHER 8MM
3 PT31830003 UPPER SUPPORT 43 X 1-1/2 9 PT31830009 LOCK NUT M8-1.25
4 PT31830004 LOWER SUPPORT 43 X 1-1/2 10 PT31830010 RUBBER FOOT M10-1.5 X 35
5 PT31830005 EXTERNAL CORNER BRACE 11 PT31830011 STEEL BAR 5/8 X 11-3/4
6 PT31830006 INTERNAL CORNER BRACE 12 PT31830012 WRENCH 13/14MM OPEN-ENDS
7 PT31830007 BUTTON HD CAP SCR M8-1.25 X 55 13 PT31830013 HEX WRENCH 5MM
Model T31830/T31831 (Mfd. Since 01/20)
-5-
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
T31830 Main Parts List
Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here
are available for purchase. Call (800) 523-4777 or visit our online parts store at www.grizzly.com to check for availability.
6
7
8
3
5
7
8
7
8
5
2
10
2
4
11
9
8
6
12
13
7
8
5
5
7
8
7
8
9
8
3
9
8
6
9
8
9
8
7
8
9
8
7
8
REF PART # DESCRIPTION REF PART # DESCRIPTION
2 PT31831002 END FRAME 8 PT31831008 FLAT WASHER 8MM
3 PT31831003 UPPER SUPPORT 61-1/4 X 1-1/2 9 PT31831009 LOCK NUT M8-1.25
4 PT31831004 LOWER SUPPORT 61-1/4 X 1-1/2 10 PT31831010 RUBBER FOOT M10-1.5 X 35
5 PT31831005 EXTERNAL CORNER BRACE 11 PT31831011 STEEL BAR 5/8 X 11-3/4
6 PT31831006 INTERNAL CORNER BRACE 12 PT31831012 WRENCH 13/14MM OPEN-ENDS
7 PT31831007 BUTTON HD CAP SCR M8-1.25 X 55 13 PT31831013 HEX WRENCH 5MM
-6-
Model T31830/T31831 (Mfd. Since 01/20)
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
T31831 Main Parts List
Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here
are available for purchase. Call (800) 523-4777 or visit our online parts store at www.grizzly.com to check for availability.
Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from
the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse,
negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty
and any and all warranties that may be implied by law, including any merchantability or fitness, for any par-
ticular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent
that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants.
In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and
any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.
We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special,
or consequential damages arising from the use of our products.
The manufacturers reserve the right to change specifications at any time because they constantly strive to
achieve better quality equipment. We make every effort to ensure that our products meet high quality and
durability standards and we hope you never need to use this warranty.
In the event you need to use this warranty, contact us by mail or phone and give us all the details. We will
then issue you a “Return Number,’’ which must be clearly posted on the outside as well as the inside of
the carton. We will not accept any item back without this number. Proof of purchase must accompany the
merchandise.
Please feel free to write or call us if you have any questions about the machine or the manual.
Thank you again for your business and continued support. We hope to serve you again soon.
To
take advantage of this warranty, you must register it at https://www.grizzly.com/secureforms/
warranty-card
, or you can scan the QR code below to be automatically directed to our warranty
registration page
. Enter all applicable information for the product.
WARRANTY
WARRANTY & RETURNS
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Grizzly T31830 Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Grizzly T31832 Owner's manual
-
-
-
-
-
-
-
-
-
Grizzly Industrial G0815 Owner's manual
