4
Charging Status
Disconnected
Charging (The main unit is powered off.)
Fully charged
Note:
Charging(
The main unit
ispoweredon.)
Toupgradethermware,poweroff
the main unit
.
Firmware Upgrade Status
Disconnected or no rmware upgrade available
Upgrading rmware
Firmware upgrade completed
WiFi Status
Disconnected from an WiFi access point
Searching for WiFi access point
Connected to an access point
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
Powering On
InserttheUSBConnectorintoaUSBchargerportthatis
connectedtoapowersource.
Note:
1. Any3rdpartyUSBcharger(5V/1A)canbeusedwith
WiFi Adapterifthechargerisapprovedbyeitherthe
FCC,CE,ICorotherlocallyapproved.
2. Donot connecttheWiFi Adapterto aUSBporton
yourPC.
Connecting to the Main Unit
InserttheUSB-CConnectorintothemainunit’sUSB-Cport.
Note:
Ifyouleavethemainunitonwhenconnectingit,the
chargingLEDontheWiFi Adapterwillblinkredslowly.
Factory Reset
IfyouwanttorestoretheWiFi Adaptertothefactorydefault
settings,youcaneasilyresettheunit:
1. Gentlyinsert a paperclipintothepinholeon thebackof
theunitandlightlypresstheFactory Reset Button.
2. TheWiFi Adapterwillautomaticallyrestartwiththethree
LEDson.
Note:
TheWiFi Adapterwillberestoredtofactorydefault
settingswhichincludetheWiFicongurationsetup,the
rmwaresetupandthelanguagesetup.
5