Sena 50R Quick start guide

Type
Quick start guide

This manual is also suitable for

1 2 3
Sena WiFi Adapter for 50 Series
Quick Start Guide
1.1.0
Sena 50 Utility App
•DownloadtheSena 50 Utility ApptosetuptheWiFi
Adaptertoautomaticallyupgradeyourmainunit.
Android:GooglePlayStore>‘Sena 50 Utility’
iOS:AppStore>‘Sena 50 Utility’
•Savetimeupdatingthermwareonthemainunitwiththe
Sena 50 Utility Appandenjoyyouradventureevenmore!
Connection Setup
1. OpentheSena 50 Utility App.
2. ClickthetopleftMenubutton
and selectthe“WiFi
Adapter”menu.
3. Followthe instructions ontheSena 50 Utility App to
connecttheWiFi AdaptertoaWiFiaccesspoint.
Note:
TochangetheWiFiaccesspoint,performtheFactory
Resetthenrepeatthestepsabove.
Upgrading the Firmware of the Main Unit
Thermwarewillbeupgradedautomaticallywhileyourmain
unitischarging.Ifyouwanttomanuallyupgradethermware,
changethesettingontheSena 50 Utility App.
Note:
DonotdisconnecttheWiFi Adapterwhileupgradingthe
rmware.Theproductmaybedamaged.
LED Description
Charging Status
Firmware Upgrade Status
WiFi Status
ENGLISH
USB Connector
USB-C
Connector
LED Indicators
Factory Reset Button
4
Charging Status
Disconnected
Charging (The main unit is powered off.)
Fully charged
Note:
Charging(
The main unit
ispoweredon.)
Toupgradethermware,poweroff
the main unit
.
Firmware Upgrade Status
Disconnected or no rmware upgrade available
Upgrading rmware
Firmware upgrade completed
WiFi Status
Disconnected from an WiFi access point
Searching for WiFi access point
Connected to an access point
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
Powering On
InserttheUSBConnectorintoaUSBchargerportthatis
connectedtoapowersource.
Note:
1. Any3rdpartyUSBcharger(5V/1A)canbeusedwith
WiFi Adapterifthechargerisapprovedbyeitherthe
FCC,CE,ICorotherlocallyapproved.
2. Donot connecttheWiFi Adapterto aUSBporton
yourPC.
Connecting to the Main Unit
InserttheUSB-CConnectorintothemainunit’sUSB-Cport.
Note:
Ifyouleavethemainunitonwhenconnectingit,the
chargingLEDontheWiFi Adapterwillblinkredslowly.
Factory Reset
IfyouwanttorestoretheWiFi Adaptertothefactorydefault
settings,youcaneasilyresettheunit:
1. Gentlyinsert a paperclipintothepinholeon thebackof
theunitandlightlypresstheFactory Reset Button.
2. TheWiFi Adapterwillautomaticallyrestartwiththethree
LEDson.
Note:
TheWiFi Adapterwillberestoredtofactorydefault
settingswhichincludetheWiFicongurationsetup,the
rmwaresetupandthelanguagesetup.
5
  • Page 1 1
  • Page 2 2

Sena 50R Quick start guide

Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI