Rega RB78 User manual

Type
User manual
If your amplifier does not have a
mono switch: The two channel signals
and the two earths need to be joined
together.This can be done either by
soldering the cartridge tag wires together
or by joining together at the Phono end
of the tonearm cable, with both methods
giving the following fixing to cartridge.
Rega RB78
Using Your Cartridge
This mono cartridge is wired internally
in series and should be connected in
one of the following ways.
Amplifier has a mono switch:
Take either the red and green or the
white and blue cartridge tags and fix
as illustrated.
Green
Red
White
Blue
Blue & Green
Red & White
Tracking
Weight
1.75 g
+
_
+
_
+
_
Please note: Rega have not tried to
create a false impression of expense
by using an elaborate package. We
have used the most simple and
cheap carton possible to avoid
transit damage and therefore more
is actually spent on the cartridge
itself and you get better value.
Stylus guard: Remove location tags
for use on installed cartridge.
RB78 2014_RB78.qxd 23/05/2014 11:00 Page 1
RB78 2014_RB78.qxd 23/05/2014 11:00 Page 2
  • Page 1 1
  • Page 2 2

Rega RB78 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI