Sargent Greenleaf AxisBlu Operating instructions

Type
Operating instructions

Sargent Greenleaf AxisBlu is a Bluetooth-enabled electronic lock that allows you to control your lock remotely via a mobile app. With AxisBlu, you can grant access to your lock to multiple users, track who has accessed your lock, and receive notifications when your lock is opened or closed. AxisBlu is easy to install and use, and it can be used with both Android and iOS devices.

Here are some of the features and capabilities of Sargent Greenleaf AxisBlu:

  • Remotely lock and unlock your door from anywhere
  • Grant access to your lock to multiple users
  • Track who has accessed your lock
  • Receive notifications when your lock is opened or closed

Sargent Greenleaf AxisBlu is a Bluetooth-enabled electronic lock that allows you to control your lock remotely via a mobile app. With AxisBlu, you can grant access to your lock to multiple users, track who has accessed your lock, and receive notifications when your lock is opened or closed. AxisBlu is easy to install and use, and it can be used with both Android and iOS devices.

Here are some of the features and capabilities of Sargent Greenleaf AxisBlu:

  • Remotely lock and unlock your door from anywhere
  • Grant access to your lock to multiple users
  • Track who has accessed your lock
  • Receive notifications when your lock is opened or closed
AxisBlu™ Pairing Instructions
GENERAL NOTES
• YouwillneedtonavigatetotheGoogleplayortheItunesAppstoretodownloadtheAxisBlu™application.
• ThedevicewillrequireBluetoothversion4.2orhigher.
• Whenpairingthedevice,youwillneedtoknowyourpairingcode.PairingcodecanbefoundonthebackoftheBluetoothmoduleandinthesuppliedenvelope.
• THE PAIRING CODE SHOULD BE RETAINED IN AN ACCESSIBLE LOCATION IN THE EVENT OF A MODULE RESET, OR PAIRING OF NEW DEVICE.
• AxisBlu™willsupport1primaryphoneand4additionalphones.TheprimaryphonewillbetheinitialphoneconnectedtotheBluetoothmodule.
• TheBluetoothmodulewillleaveits“whitelist”openforpairinguntiltheprimarymobiledevicehasbeenconnected.Aftertheinitialpairing,the“whitelist”willnotbe
openagainuntiltheuserselectstheADDPHONEoptioninthemobileapp.
Sargent & Greenleaf S.A.
9, Chemin du Croset
1024 Ecublens, Switzerland
Phone: +41-21 694 34 00
Fax: +41-21 694 34 09
Document630-945
Revised10/22/2018
Sargent & Greenleaf, Inc.
One Security Drive
Nicholasville, KY 40356 USA
Phone: (800)-826-7652
Fax: (800)-634-4843
Copyright
©
2018, Sargent & Greenleaf, Inc.
IOS PAIRING
1 NavigatetotheAxisBlu™Icon andclicktostartuptheapplication.Thedefaultstartupwillshowthedeviceisnotconnected.
2 Inthebottomrightcornerclickontheicon.Thiswillopentheapplicationoptions.
3 Youwillseethreeselections:
Reconnect - Connecttodevice
Instructions - Operatinginstructions
AddPhone - Addadditonalphones
4 ClickontheReconnectIcon.
5 ClickthenameofyourAxisBlu™devicetoconnect.
6 Thesystemwillaskforthepairingcode.ThepairingcodeislocatedonthebackoftheBluetoothmoduleorinthecoinenvelope.Enterthe6
digitpairingcodefoundonthelabel.
7 Oncepairingiscompleted,usetheCONNECTINGsectiontoconnectthedevicetothelock.
ANDROID PAIRING
1 NavigatetotheAxisBlu™Icon andclicktostartuptheapplication.Thedefaultstartupwillshowthedeviceisnotconnected.
2 Inthebottomrightcornerclickontheicon.Thiswillopentheapplicationoptions.
3 Youwillseethreeselections:
Reconnect - Connecttodevice
Instructions - Operatinginstructions
AddPhone - Addadditonalphones
4 ClickontheReconnectIconandclickonBluetoothSettings.
5 ClickthenameofyourAxisBlu™devicetoconnectunderAVAILABLEDEVICES.
6 Thesystemwillaskforthepairingcode.ThepairingcodeislocatedonthebackoftheBluetoothmoduleorinthecoinenvelope.Enterthe6
digitpairingcodefoundonthelabel.
7 Oncepairngiscompleted,usetheCONNECTINGsectiontoconnectthedevicetothelock.
TESTING
1 Enter123456#intothe box.
2 Hitthe button.
3 OnthescreenyouwillseetheRESPONSEturngreenandBOLT
STATUSturnred.Thisindicatesthelockisopen.
4 Whenthelockboltsecures,theBOLTSTATUSturnGreen.This
indicatesthelockissecure.TheBOLTSTATUSwillindicationis
validaslongastheconnectionisestablished.
5 Thelockwillsendinformationaboutthestatusofthebattery
whenitisopenedandclosed.
CONNECTING TO AxisBlu™
1 NavigatetotheAxisBlu™Iconandselecttheapplication
icon.Thedefaultstartupwillshowthedeviceisnotconnected.
2 Inthebottomrightcornerclickontheicon.Thiswillopen
theapplicationoptions.
3 Youwillseethreeselections:

Reconnect - Connecttodevice
Instructions - Operatinginstructions
AddPhone - Addadditonalphones
4 ClickontheReconnectIcon.
5 ClickthenameofyourAxisBlu™devicetoconnect.
6 WhenconnectedtheCONNECTIONIconwillbegreenandthe
nameofthedevicewillbedisplayedbelowtheCONNECTIONIcon.
YouarenowconnectedtotheAxisBlu™lock.
YouhavesuccessfultestedyourAxisBlu™lock.
Sargent & Greenleaf S.A.
9, Chemin du Croset
1024 Ecublens, Switzerland
Phone: +41-21 694 34 00
Fax: +41-21 694 34 09
Document630-945
Revised10/22/2018
Sargent & Greenleaf, Inc.
One Security Drive
Nicholasville, KY 40356 USA
Phone: (800)-826-7652
Fax: (800)-634-4843
Copyright
©
2018, Sargent & Greenleaf, Inc.
ADD PHONE
1 FromthePrimaryPhone,navigatetotheAxisBlu™Icon and
selecttheapplicationicon.Thedefaultstartupwillshowthe
deviceisnotconnected.
2 Inthebottomrightcornerclickontheicon.Thiswillopen
theapplicationoptions.
3 Youwillseethreeselections:

Reconnect - Connecttodevice
Instructions - Operatinginstructions
AddPhone - Addadditonalphones
4 ClickontheAddPhoneIcon.
5 ClosetheAxisBlue™app.
6 UsetheCONNECTINGprocesstoconnectnewphone.
APP COMMUNICATION
1. Bolt secured aer opening code.
2. Bolt open aer valid code.
3. Connecting to lock.
4. Not connected.
LOST/NEW TELEPHONE
1. Plugina9Voltbatteryintotheconnector.
2. Openthemedalliononthefrontofthesafeexposingthebackup
batteryconnection.
3. Insertthebatterplugintothemedallionplug.
4. Removetheplugafter3seconds.
5. NavigatetotheAxisBlu™Icon andselecttheapplicationicon.
6. Use“CONNECTINGTOAxisBlu™“topair/repairyourdevice.
7. Openyourlockusingthelastknowvalidcombination.
SuppliedwithyourAxisBlu™Medallioninstallationisabackupbatteryconnection.Usingthebackupbatteryconnection,youcanresettheblue
toothmoduleandconnectwithyournewphone.
LOST/NEW TELEPHONE KEYPAD
1. OpenthesafedoorandgainaccesstotheBluetoothmodule.
2. Pressanholdtheresetbuttonlocatednexttotheoutsideofthecase.
3. NavigatetotheAxisBlu™Icon andselecttheapplicationicon.
4. Use“CONNECTINGTOAxisBlu™“topair/repairyourdevice
Basic Operating Instructions
AX26
GENERAL NOTES
• Alloperatingcodesconsistofsixcharacters(digitsand/orletters).TheS&Gfactorymastercodeis123456#.
• ThemobileapprequiresthatBluetoothbeenabledandrequiresaccessto“locationservices.
• Afterchangingoraddinganewcode,lock/unlockthedeviceatleast3timeswithcontainerdooropen.Makesureitfunctionscorrectlybeforeclosingthedoor.
• Iffiveormoreincorrectcodesareenteredconsecutively,thelockwillenteraten-minutepenaltyperiodduringwhichitwillnotacceptinput.Pressingakeyduringthe
penaltytimeextendstheperiodafewseconds.
• Whenthelockisinpenalty,themobileappwillnotbeabletoworkwiththeAxisBluunit.AnydatathatissenttotheunitduringpenaltytimewillresultintheRESPONSE
lightflashingredforafewseconds(insteadofjustbrieflyturningon).Inaddition,iftheunitisakeypadunit,thentherewillnotbeanysoundfromthekeypadwhendatais
sentthroughtheappduringpenaltytime.
• Yourlockmayhaveamanagementresetcode(MRC)thatallowsyoutosetanewmastercodeincasetheexistingoneislost.Contactyoursafemanufacturerorlockinstaller
intheeventofalostmastercode.
• Personaldatathatcanberelatedtoacodeholder,suchasabirthdate,streetnumber,orphonenumber,shouldnotbeused.Avoidcodesthatcanbeeasilyguessed(suchas
123456or111111).Thelock’sfactorydefaultcodemustbechangedtoaunique,securecodewhenthelockisputintooperationbytheenduser.
• Whenoperatingthelockviatheapp,youwillneedtopresstheSendbuttontotocompletetheoperation.
• Whenoperatingthelockviatheapp,youareabletoinputchangecode,addcode,deletecode,etcasacompletestring.
Sargent & Greenleaf, Inc.
One Security Drive
Nicholasville, KY 40356 USA
Phone: (800)-826-7652
Fax: (800)-634-4843
Copyright
©
2018, Sargent & Greenleaf, Inc.
Sargent & Greenleaf S.A.
9, Chemin du Croset
1024 Ecublens, Switzerland
Phone: +41-21 694 34 00
Fax: +41-21 694 34 09
Document630-945
Revised10/22/2018
INTRODUCTION
• S&Gelectronicsafelocksincorporatesophisticatedelectroniccircuitryandaresuitableforindooruseonly.
• Theauditfeatures,peripheraldevicesandaccessories,softwarefeatures,one-timecodefunctionality,USBfunctionality,wirelessfunctionality,remotefunctionality,
BluetoothfunctionalityandotheradditionalfeaturesarebeyondthescopeoftheUL2058standardandnotpartoftheULListing.
• Thelengthofanyexternalcablingusedforthisproductmustnotexceed3metersinlength.Useofcablingexceeding3metersmayvoidproductcertifications.
• Thekeypadshouldonlybecleanedwithasoft,drycloth.Avoidtheuseofsolventsorliquids.
• Neverattempttolubricatethelockorkeypadcomponents.
• Eachtimeabuttonispressedandthelockacceptstheinput,thelockemitsa“beep”,theredLEDonthekeypadflashes.
• IfAxisBlu™isinstalledwithakeypad,youwillhearaseriesofbeepswhenprogrammingdevicewiththephoneapplication.
• AllthelettersoftheEnglishalphabetaredisplayedonthekeypad.Thisallowsyoutodevisenumeric,alphanumericorword-basedcodes.Usewhatworksbestforyou.
Opening the Lock
Enter your 6-digit code +#, then click the button.
The lock will unlock for approximately Six seconds, then return to the locked state if you do not open the safe.
Reset the Locks Factory Programmed Management Reset Code (MRC)
6 7 * 1 2 3 4 5 6 # NEW 8-DIGIT MRC #
NEW 8-DIGIT MRC # . Click the button.
Note: The MRC can only be changed by using the factory default master code of 1 2 3 4 5 6 before the master code is changed for the first time.
Changing Your Code (either master code or user code)
Enter 33
*
, then (current 6-digit code) #, (new 6-digit code) # (new 6-digit code) #. Click the button.
ALWAYS CHECK NEW CODE AT LEAST THREE TIMES BEFORE CLOSING THE DOOR!
Creating a Code (Supervisor code)
Enter 74
*
(6-digit master code) #1#, (new 6-digit user code) #, (new 6-digit user code) #. Click the button.
The new user code will open the lock just like the master code.
Delete the User Code
Enter 74
*
, (6-digit master code) #, 1#, #, #. Click the button.
The user code is erased from the lock.
Using the Management Reset Code (MRC)
Enter 67
*
, (8-digit reset code) #, (new 6-digit master code) #, (new 6-digit master code) #.Click the button.
After the beeps at the end of the sequence, the lock will emit an additional beep for every time the MRC has been used, including the current time.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Sargent Greenleaf AxisBlu Operating instructions

Type
Operating instructions

Sargent Greenleaf AxisBlu is a Bluetooth-enabled electronic lock that allows you to control your lock remotely via a mobile app. With AxisBlu, you can grant access to your lock to multiple users, track who has accessed your lock, and receive notifications when your lock is opened or closed. AxisBlu is easy to install and use, and it can be used with both Android and iOS devices.

Here are some of the features and capabilities of Sargent Greenleaf AxisBlu:

  • Remotely lock and unlock your door from anywhere
  • Grant access to your lock to multiple users
  • Track who has accessed your lock
  • Receive notifications when your lock is opened or closed

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI