Sargent and Greenleaf AxisBlu Operating instructions

Brand: Sargent and Greenleaf

Model: AxisBlu

Type: Operating instructions

AxisBlu™ Pairing Instructions

GENERAL NOTES

• YouwillneedtonavigatetotheGoogleplayortheItunesAppstoretodownloadtheAxisBlu™application.

• ThedevicewillrequireBluetoothversion4.2orhigher.

• Whenpairingthedevice,youwillneedtoknowyourpairingcode.PairingcodecanbefoundonthebackoftheBluetoothmoduleandinthesuppliedenvelope.

• THE PAIRING CODE SHOULD BE RETAINED IN AN ACCESSIBLE LOCATION IN THE EVENT OF A MODULE RESET, OR PAIRING OF NEW DEVICE.

• AxisBlu™willsupport1primaryphoneand4additionalphones.TheprimaryphonewillbetheinitialphoneconnectedtotheBluetoothmodule.

• TheBluetoothmodulewillleaveits“whitelist”openforpairinguntiltheprimarymobiledevicehasbeenconnected.Aftertheinitialpairing,the“whitelist”willnotbe

openagainuntiltheuserselectstheADDPHONEoptioninthemobileapp.

Sargent & Greenleaf S.A.

9, Chemin du Croset

1024 Ecublens, Switzerland

Phone: +41-21 694 34 00

Fax: +41-21 694 34 09

Document630-945

Revised10/22/2018

Sargent & Greenleaf, Inc.

One Security Drive

Nicholasville, KY 40356 USA

Phone: (800)-826-7652

Fax: (800)-634-4843

2018, Sargent & Greenleaf, Inc.

IOS PAIRING

1 NavigatetotheAxisBlu™Icon andclicktostartuptheapplication.Thedefaultstartupwillshowthedeviceisnotconnected.

2 Inthebottomrightcornerclickontheicon.Thiswillopentheapplicationoptions.

3 Youwillseethreeselections: 

 Reconnect - Connecttodevice

 Instructions - Operatinginstructions

 AddPhone - Addadditonalphones

4 ClickontheReconnectIcon.

5 ClickthenameofyourAxisBlu™devicetoconnect.

6 Thesystemwillaskforthepairingcode.ThepairingcodeislocatedonthebackoftheBluetoothmoduleorinthecoinenvelope.Enterthe6

digitpairingcodefoundonthelabel.

7 Oncepairingiscompleted,usetheCONNECTINGsectiontoconnectthedevicetothelock.

ANDROID PAIRING

1 NavigatetotheAxisBlu™Icon andclicktostartuptheapplication.Thedefaultstartupwillshowthedeviceisnotconnected.

2 Inthebottomrightcornerclickontheicon.Thiswillopentheapplicationoptions.

3 Youwillseethreeselections: 

 Reconnect - Connecttodevice

 Instructions - Operatinginstructions

 AddPhone - Addadditonalphones

4 ClickontheReconnectIconandclickonBluetoothSettings.

5 ClickthenameofyourAxisBlu™devicetoconnectunder“AVAILABLEDEVICES.”

6 Thesystemwillaskforthepairingcode.ThepairingcodeislocatedonthebackoftheBluetoothmoduleorinthecoinenvelope.Enterthe6

digitpairingcodefoundonthelabel.

7 Oncepairngiscompleted,usetheCONNECTINGsectiontoconnectthedevicetothelock.

TESTING

1 Enter123456#intothe box.

2 Hitthe button. 

3 OnthescreenyouwillseetheRESPONSEturngreenandBOLT

STATUSturnred.Thisindicatesthelockisopen.

4 Whenthelockboltsecures,theBOLTSTATUSturnGreen.This

indicatesthelockissecure.TheBOLTSTATUSwillindicationis

validaslongastheconnectionisestablished.

5 Thelockwillsendinformationaboutthestatusofthebattery

whenitisopenedandclosed.

CONNECTING TO AxisBlu™

1 NavigatetotheAxisBlu™Iconandselecttheapplication

icon.Thedefaultstartupwillshowthedeviceisnotconnected.

2 Inthebottomrightcornerclickontheicon.Thiswillopen

theapplicationoptions.

3 Youwillseethreeselections:



 Reconnect - Connecttodevice

 Instructions - Operatinginstructions

 AddPhone - Addadditonalphones



4 ClickontheReconnectIcon.

5 ClickthenameofyourAxisBlu™devicetoconnect.

6 WhenconnectedtheCONNECTIONIconwillbegreenandthe

nameofthedevicewillbedisplayedbelowtheCONNECTIONIcon.

YouarenowconnectedtotheAxisBlu™lock.

YouhavesuccessfultestedyourAxisBlu™lock.

Sargent & Greenleaf S.A.

9, Chemin du Croset

1024 Ecublens, Switzerland

Phone: +41-21 694 34 00

Fax: +41-21 694 34 09

Document630-945

Revised10/22/2018

Sargent & Greenleaf, Inc.

One Security Drive

Nicholasville, KY 40356 USA

Phone: (800)-826-7652

Fax: (800)-634-4843

2018, Sargent & Greenleaf, Inc.

ADD PHONE

1 FromthePrimaryPhone,navigatetotheAxisBlu™Icon and

selecttheapplicationicon.Thedefaultstartupwillshowthe

deviceisnotconnected.

2 Inthebottomrightcornerclickontheicon.Thiswillopen

theapplicationoptions.

3 Youwillseethreeselections:



 Reconnect - Connecttodevice

 Instructions - Operatinginstructions

 AddPhone - Addadditonalphones



4 ClickontheAddPhoneIcon.

5 ClosetheAxisBlue™app.

6 UsetheCONNECTINGprocesstoconnectnewphone.

APP COMMUNICATION

1. Bolt secured aer opening code.

2. Bolt open aer valid code.

3. Connecting to lock.

4. Not connected.

LOST/NEW TELEPHONE

1. Plugina9Voltbatteryintotheconnector.

2. Openthemedalliononthefrontofthesafeexposingthebackup

batteryconnection.

3. Insertthebatterplugintothemedallionplug.

4. Removetheplugafter3seconds.

5. NavigatetotheAxisBlu™Icon andselecttheapplicationicon.

6. Use“CONNECTINGTOAxisBlu™“topair/repairyourdevice.

7. Openyourlockusingthelastknowvalidcombination.

SuppliedwithyourAxisBlu™Medallioninstallationisabackupbatteryconnection.Usingthebackupbatteryconnection,youcanresettheblue

toothmoduleandconnectwithyournewphone.

LOST/NEW TELEPHONE KEYPAD

1. OpenthesafedoorandgainaccesstotheBluetoothmodule.

2. Pressanholdtheresetbuttonlocatednexttotheoutsideofthecase.

3. NavigatetotheAxisBlu™Icon andselecttheapplicationicon.

4. Use“CONNECTINGTOAxisBlu™“topair/repairyourdevice

Basic Operating Instructions

AX26

GENERAL NOTES

• Alloperatingcodesconsistofsixcharacters(digitsand/orletters).TheS&Gfactorymastercodeis123456#.

• ThemobileapprequiresthatBluetoothbeenabledandrequiresaccessto“locationservices.”

• Afterchangingoraddinganewcode,lock/unlockthedeviceatleast3timeswithcontainerdooropen.Makesureitfunctionscorrectlybeforeclosingthedoor.

• Iffiveormoreincorrectcodesareenteredconsecutively,thelockwillenteraten-minutepenaltyperiodduringwhichitwillnotacceptinput.Pressingakeyduringthe

penaltytimeextendstheperiodafewseconds.

• Whenthelockisinpenalty,themobileappwillnotbeabletoworkwiththeAxisBluunit.AnydatathatissenttotheunitduringpenaltytimewillresultintheRESPONSE

lightflashingredforafewseconds(insteadofjustbrieflyturningon).Inaddition,iftheunitisakeypadunit,thentherewillnotbeanysoundfromthekeypadwhendatais

sentthroughtheappduringpenaltytime.

• Yourlockmayhaveamanagementresetcode(MRC)thatallowsyoutosetanewmastercodeincasetheexistingoneislost.Contactyoursafemanufacturerorlockinstaller

intheeventofalostmastercode.

• Personaldatathatcanberelatedtoacodeholder,suchasabirthdate,streetnumber,orphonenumber,shouldnotbeused.Avoidcodesthatcanbeeasilyguessed(suchas

123456or111111).Thelock’sfactorydefaultcodemustbechangedtoaunique,securecodewhenthelockisputintooperationbytheenduser.

• Whenoperatingthelockviatheapp,youwillneedtopresstheSendbuttontotocompletetheoperation.

• Whenoperatingthelockviatheapp,youareabletoinputchangecode,addcode,deletecode,etcasacompletestring.

Sargent & Greenleaf, Inc.

One Security Drive

Nicholasville, KY 40356 USA

Phone: (800)-826-7652

Fax: (800)-634-4843

2018, Sargent & Greenleaf, Inc.

Sargent & Greenleaf S.A.

9, Chemin du Croset

1024 Ecublens, Switzerland

Phone: +41-21 694 34 00

Fax: +41-21 694 34 09

Document630-945

Revised10/22/2018

INTRODUCTION

• S&Gelectronicsafelocksincorporatesophisticatedelectroniccircuitryandaresuitableforindooruseonly.

• Theauditfeatures,peripheraldevicesandaccessories,softwarefeatures,one-timecodefunctionality,USBfunctionality,wirelessfunctionality,remotefunctionality,

BluetoothfunctionalityandotheradditionalfeaturesarebeyondthescopeoftheUL2058standardandnotpartoftheULListing.

• Thelengthofanyexternalcablingusedforthisproductmustnotexceed3metersinlength.Useofcablingexceeding3metersmayvoidproductcertifications.

• Thekeypadshouldonlybecleanedwithasoft,drycloth.Avoidtheuseofsolventsorliquids.

• Neverattempttolubricatethelockorkeypadcomponents.

• Eachtimeabuttonispressedandthelockacceptstheinput,thelockemitsa“beep”,theredLEDonthekeypadflashes.

• IfAxisBlu™isinstalledwithakeypad,youwillhearaseriesofbeepswhenprogrammingdevicewiththephoneapplication.

• AllthelettersoftheEnglishalphabetaredisplayedonthekeypad.Thisallowsyoutodevisenumeric,alphanumericorword-basedcodes.Usewhatworksbestforyou.

Opening the Lock

Enter your 6-digit code +#, then click the button.