Dunlop DVP5 User manual

Dunlop
Brand
Dunlop
Model
DVP5
Category
Guitar accessories
Type
User manual

Dunlop DVP5 Volume (X)8 Pedal is a passive unit and does not require a power source to operate. It can be used to create incredibly smooth volume swells or control your favorite FX parameters with the road-proven, patented Low Friction Band-Drive. The pedal features Volume, FX, Output, and Tuner jacks.

The FX jack can be used for expression control of effect parameters, while the Tuner jack provides a constant signal to your tuner. The Output jack is used for volume signal control.

The DVP5 also has internal controls that allow you to set the expression mode's minimum effect level parameters and the rocker's heel/toe polarity. This gives you a lot of flexibility in customizing the pedal to your specific needs.

Dunlop DVP5 Volume (X)8 Pedal is a passive unit and does not require a power source to operate. It can be used to create incredibly smooth volume swells or control your favorite FX parameters with the road-proven, patented Low Friction Band-Drive. The pedal features Volume, FX, Output, and Tuner jacks.

The FX jack can be used for expression control of effect parameters, while the Tuner jack provides a constant signal to your tuner. The Output jack is used for volume signal control.

The DVP5 also has internal controls that allow you to set the expression mode's minimum effect level parameters and the rocker's heel/toe polarity. This gives you a lot of flexibility in customizing the pedal to your specific needs.

jimdunlop.com/DVP5
2
DVP5 | VOLUME (X)8 PEDAL
Designed with our friends at Pedaltrain,
®
the Volume (X)
™
8 Pedal allows for the
most efficient layouts on Metro Series and other popular pedalboards. Once
you’re all set up, step on this pedal to create incredibly smooth volume swells
or control your favorite FX parameters with the road-proven, patented Low
Friction Band-Drive. Internal controls set the expression mode’s minimum
effect level parameters and the rocker’s heel/toe polarity. Features Volume,
FX, Output, and Tuner jacks.
3
DVP5 | VOLUME (X)8 PEDAL
A FX JACK FOR EXPRESSION CONTROL OF EFFECT PARAMETER
B TUNER JACK FOR CONSTANT SIGNAL TO TUNER
C OUTPUT JACK FOR VOLUME SIGNAL CONTROL
A B C
EXTERNAL FEATURES
4
DVP5 | VOLUME (X)8 PEDAL
A INTERNAL 50 KΩ POT FOR SETTING MINIMUM HEEL-DOWN VALUE, WIRED IN SERIES WITH EXPRESSION POT
B INTERNAL SWITCH FOR REVERSING FOOT/HEEL POLARITY
A
B
INTERNAL CONTROLS
5
DVP5 | VOLUME (X)8 PEDAL
GENERAL OPERATION
POWER
The Dunlop Volume (X)
™
8 Pedal is a passive unit and
does not require a power source to operate.
DIRECTIONS
We recommend placing the DVP5 at the beginning of
your effects signal chain. Run a cable from your guitar
to the DVP5’s INPUT jack.
Optional: Run a cable from the TUNER output
to a tuner. Signal to tuner is active regardless
of rocker position.
VOLUME MODE (250 kΩ POT)
•
Run a cable from the DVP5’s OUTPUT jack to your
amplifier.
•
With the pedal in full toe-down position, set your
guitar and amp’s maximum desired volume level.
•
Move the rocker pedal toward the heel-down position
to decrease the volume.
•
The output signal will be muted when the rocker
pedal reaches full heel-down position.
EXPRESSION MODE (10 kΩ POT)
•
Run a stereo or TRS cable from the DVP5’s FX jack
to your effects pedal’s EXP jack.
•
With the pedal in full toe-down position, set the
effect parameter you want to control to the desired
maximum level.
•
Optional: To set the effect parameter’s minimum
level, use internal potentiometer toward the front
of the pedal. Turn it clockwise to raise the minimum
level or counterclockwise to lower it. Note: factory
setting is fully counterclockwise.
•
Move the rocker pedal toward the heel-down
position to lower the value of the effect parameter
within the range set by your effect pedal’s control
and the DVP5’s internal potentiometer.
•
When the rocker is fully heel-down, the effect
parameter will be at the minimum value as set
by the internal potentiometer.
•
Optional: Use the internal blue push switch to
reverse the function of heel-and toe-down postion.
ADJUSTABLE TORQUE
To adjust rocker pedal torque, place pedal in toe-
down position. Insert a 1/4” flat blade screwdriver
into torque adjust screw located under heel-end of
rocker pedal. Turn clockwise to increase resistance
or counterclockwise to decrease resistance.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Dunlop DVP5 User manual

Dunlop
Brand
Dunlop
Model
DVP5
Category
Guitar accessories
Type
User manual

Dunlop DVP5 Volume (X)8 Pedal is a passive unit and does not require a power source to operate. It can be used to create incredibly smooth volume swells or control your favorite FX parameters with the road-proven, patented Low Friction Band-Drive. The pedal features Volume, FX, Output, and Tuner jacks.

The FX jack can be used for expression control of effect parameters, while the Tuner jack provides a constant signal to your tuner. The Output jack is used for volume signal control.

The DVP5 also has internal controls that allow you to set the expression mode's minimum effect level parameters and the rocker's heel/toe polarity. This gives you a lot of flexibility in customizing the pedal to your specific needs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents