Hunter Fan 52259 Owner's manual

Brand: Hunter Fan

Model: 52259

Type: Owner's manual

This manual is also suitable for

52258

Hunter Fan 52259 is a new, high-quality ceiling fan that is perfect for any home or office. This fan comes with a variety of features that make it a great choice for any room, including:

Three speed settings (low, medium, and high)
Reversible motor for year-round comfort
Five blades for optimal airflow
Light kit adaptable
Remote control for easy operation
Limited lifetime motor warranty With its stylish design and powerful performance, the Hunter Fan 52259 is sure to keep you comfortable all year long.

Hunter Fan 52259 is a new, high-quality ceiling fan that is perfect for any home or office. This fan comes with a variety of features that make it a great choice for any room, including:

Three speed settings (low, medium, and high)
Reversible motor for year-round comfort
Five blades for optimal airflow
Light kit adaptable
Remote control for easy operation
Limited lifetime motor warranty With its stylish design and powerful performance, the Hunter Fan 52259 is sure to keep you comfortable all year long.

www.HunterFan.com

1.888.830.1326

PAGE

30 inches

7 feet

PAGE

What to Expect with

Your Installation

Ceiling Bracket

Ladder

PAGE

Tools Needed

Maintenance

& Cleaning

Troubleshooting

Table of Contents

PAGE

Wiring CanopyDownrod

PAGE

Blades

PAGE

Mounting Options

Light Kit

PAGE

Congratulations on purchasing your new Hunter®

ceiling fan! It will provide comfort and performance

in your home or ofce for many years. This installation

and operation manual contains complete instructions

for installing and operating your fan.

We are proud of our work and appreciate the

opportunity to supply you with the best ceiling fan

available anywhere in the world.

To register your fan, please visit:

www.HunterFan.com/register

Save your receipt for proof of purchase.

Remote Control

PAGE

www.HunterFan.com

1.888.830.1326

What to Expect with Your Installation

Know your wiring

If you are unfamiliar

with wiring, use a

qualied electrician.

You may need a

friend to help you.

Check box to see

fan weight

Assess location

30 inches

from blade tip

to nearest wall

or obstruction

7 feet

from bottom

edge of blade

to the oor

Select a downrod length

Assess ceiling angle

Must be able to

secure the fan to

building structure or

fan-rated outlet box

Standard Downrod

for ceilings 8-10 feet high

Shorter Downrod

for fans installed close to ceiling

Longer Downrod

for ceilings 10 feet or higher

Ceiling angles greater

than 34° will require an

Angled Mounting Kit.

See page 4 for details.

w.1 - To reduce the risk of re, electrical shock, or personal injury,

mount fan directly from building structure and/or an outlet box marked

acceptable for fan support of 70 lbs (31.8 kg) and use the mounting

screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or servicing your

fan, disconnect the power by turning off the circuit breakers to the outlet

box and associated wall switch location. If you cannot lock the circuit

breakers in the off position, securely fasten a prominent warning device,

such as a tag, to the service panel.

w.3 - To reduce the risk of re, electrical shock, or motor damage, use only

Hunter Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade brackets when

installing the blade brackets, balancing the blades, or cleaning the fan. Do not

insert foreign objects in between rotating fan blades.

c.1 - All wiring must be in accordance with national and local electrical codes

ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualied electrician.

c.2 - Use only Hunter replacement parts.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate

radio frequency energy and if not installed and used in accordance with the

instructions may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: modications not approved by the party responsible for compliance

could void user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

CAUTIONS

www.HunterFan.com

1.888.830.1326

Tools Needed

Ladder

Power Drill

(optional)

9/64” Drill Bit

(optional)

Screwdrivers

Pliers Wire Strippers

If mounting to a support structure, you will also need these tools.

Do not discard the hardware bags or mix

parts from different bags. Make note of

the symbol printed on each hardware

bag. The symbols can be used to identify

the appropriate hardware for each step.

www.HunterFan.com

1.888.830.1326

If you have an angled ceiling:

1. You will need a longer downrod (sold separately).

2. If your ceiling angle is greater than 34°, you will

also need an Angled Mounting Kit (sold separately).

Guide Touches

BOTH Ceiling & Wall

Guide Touches

Wall

but

NOT Ceiling

You need BOTH

a Longer

Downrod &

an Angled

Mounting Kit

You need ONLY

a Longer

Downrod

*most common

If you have a at ceiling:

Hang your fan by a standard downrod (included).

Mounting Options

Use Standard Mounting

or Low-Prole Mounting

to hang the fan from a at ceiling.

Use Angled Mounting

to hang the fan from a

vaulted or angled ceiling.

CEILING

WALL

OPTION

Standard

Mounting

OPTION

Angled

Mounting

2 3

SLIDE

toward ceiling

PLACE

against wall

FOLD

on dotted line

34°

Use the three steps below to determine if your ceiling angle is greater than 34°

Support

Structure

Ceiling

Outlet Box

(required)

Angled

Mounting

Style

Standard

Mounting

Style

Support

Structure

Ceiling

Outlet Box

(required)

www.HunterFan.com

1.888.830.1326

Ceiling Bracket

OFF

For angled ceilings, point

opening toward peak.

Refer to warning w.1 on pg. 2

If you are unable to do this,

call Technical Support at

1-888-830-1326.

Use wood screws

(included) when securing

to support structure with

approved electrical outlet

box. Drill 9/64” pilot holes

in support structure to aid

in securing ceiling bracket

with hardware found in

the hardware bag.

Use machine screws

(provided with outlet

box) when securing to

existing ceiling fan-rated

outlet box. Make sure

it is securely installed

and is acceptable for fan

support of 31.8 kg (70 lbs)

or less.

Turn Power

Make sure all four bumpers

are still attached.

To avoid possible electrical shock, before installing your fan,

disconnect the power by turning off the circuit breakers to

the outlet box associated with the wall switch location.

www.HunterFan.com

1.888.830.1326

Downrod

Slide

1 2 3 4 5

678910

Sold Separately

Included

Longer

Downrod

for angled

ceilings or

ceilings 10’ or

higher

Shorter

Downrod

for fans installed

close to ceiling

Standard

Downrod

for ceilings 8-10’ high

Option 1Option 2

Option 3

skip to next page

If you need a different downrod length follow these steps:

Steps 1-5 to remove standard downrod pipe

Steps 6-10 to reassemble with new pipe

Included

(pre-assembled)

www.HunterFan.com

1.888.830.1326

KEEP!

8”

3/8”

(not to scale)

Remove the pre-installed

setscrew so that the downrod

can be inserted.

Hand tighten the downrod (at

least 4-5 full turns) until it stops.

The wires can be cut, but

leave at least 8” extending

from the top of the downrod.

Downrod (continued)

8”

3/8”

Tighten the setscrew

with pliers. DO NOT

HAND TIGHTEN.

If the setscrew is not tightened

securely, the fan may fall.

www.HunterFan.com

1.888.830.1326

Note: Fan style may vary.

Downrod (continued)

DO NOT PICK THE FAN UP BY THE

CANOPY OR WIRES. Place the downrod

ball into the slot in the ceiling bracket.

Put the wires and downrod through the

canopy. Let the canopy sit loosely on

top of the fan.

www.HunterFan.com

1.888.830.1326

Wiring

Turn the splices upward and push them carefully back through the hanger bracket

into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

Refer to CAUTION c.1 on pg. 2

green/yellow

stripe (grounding)

green/yellow

stripe

green/yellow stripe

Note: To connect the wires, hold

the bare metal leads together and

place a wire connector over them,

then twist clockwise until tight.

Using an orange wire connector

from the hardware bag:

Connect the 3 grounding wires

(green, green/yellow stripe, or bare

copper) coming from the ceiling,

downrod, and ceiling bracket.

Receiver

Place the receiver on top of the downrod

assembly as shown.

Tip: If you have difculty tting the receiver

into place, make sure you have cut the excess

wires from the fan. See the Downrod section

for more details.

www.HunterFan.com

1.888.830.1326

Wiring (continued)

Turn the splices upward and push them carefully back through the hanger bracket

into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

Refer to CAUTION c.1 on pg. 2

Note: If you have a dual switch,

please cap the secondary power

wire from the ceiling. This will

result in one unused switch.

Using the orange wire connectors

from the hardware bag:

• Connect the black (ungrounded)

wire from the ceiling to the black

wire from the receiver.

• Connect the white (grounded)

wire from the ceiling to both the

white wire from the receiver and

the white wire from the fan.

black

blue

yellow

blue

Using the orange wire connectors

from the remote control hardware bag:

• Connect the yellow wire from

the receiver to the black wire

from the fan.

• Connect the blue wire from the

receiver to the blue wire (or

possibly black with white stripe

wire) from the fan.

black

(ungrounded)

white (grounded)

black

white

www.HunterFan.com

1.888.830.1326

Canopy

Position the canopy so that, when

lifted into place, the canopy ts into

the hanging bracket as shown.

Note: Fan style may vary.

Lift the canopy into place so that

the screw holes are aligned.

Screw

Holes

Insert the two canopy screws

found in the hardware bag.

www.HunterFan.com

1.888.830.1326

Blades

Align the three blade holes with the three

blade iron posts. Squeeze the blade and the

blade iron post together.

The ared tops of the blade iron posts

will be fully visible above the blade when

properly assembled.

Blade

Holes

Blade

Iron Post

Flared

Tops

www.HunterFan.com

1.888.830.1326

Light Kit

Partially install two of the switch housing

screws found in the hardware bag.

Connect the plugs from the upper and lower

switch housings. Make sure to line up the

colored markings on the connectors.

Align the notches in the sides of the lower

switch housing with the upper switch

housing screws. Lift the lower switch housing.

Twist the lower switch housing clockwise

to lock into place. Then thread the fan

pull chain through the hole in the light kit.

Install the third switch housing screw.

Tighten all three screws securely.

Make sure the lower switch housing is securely attached to

the upper switch housing. Failure to properly secure all three

switch housing screws could result in the light xture falling.

Switch

Housing

Screw

Switch

Housing

Screw

Notch

Want to install your fan without a light kit?

Go to www.HunterFan.com/FAQs and click

“How do I install my fan without the light kit?”

www.HunterFan.com

1.888.830.1326

Light Kit (continued)

CONGRATULATIONS!

YOU’RE DONE!

See next page for fan

operation instructions.

Connect the appropriate pull

chain pendant to each of the short

chains coming from the nial

and nial cap. The fan pull chain

controls the speed: from high to

off. The light pull chain controls

the light xture: on and off.

Press the globe and globe keeper

ush against the metal plate. Thread

the light pull chain through the hole

in the center of the nial cap and

thread the fan pull chain through the

hole in the side of the cap. Finally,

thread only the light pull chain

through the hole in the nial and

screw the nial onto the threaded rod.

Install the included LED

bulbs into the sockets. When

necessary, replace with bulbs of

same wattage.

Light

Pull

Chain

Fan

Pull

Chain

Note: Globe style and number of

lights may vary.

Finial

Cap

Globe

Keeper

Metal

Plate

Globe

www.HunterFan.com

1.888.830.1326

Remote Control

To access the battery compartment, remove

the small Phillips head screw that secures the

battery door to the transmitter assembly. The

battery should be installed with the positive

(+) side up. Replace with a CR2032 battery

when necessary.

Phillips

Head

Screw

Battery

Door

Turn Power

The remote transmitter is already paired

to the receiver and ready to use.

Note: If your need to pair your remote, cycle power

to the fan by turning power off and back on at the

wall switch (or circuit breaker if necessary). Within

three minutes, press and hold both the Fan OFF

button and the Fan ON button for four seconds

to pair the remote. To prevent faulty operation,

please disconnect power from all other ceiling

fans within range while pairing.

www.HunterFan.com

1.888.830.1326

Fan Operation:

Press and quickly release the ON or OFF button on the

remote control to turn the fan OFF or ON.

To change the fan speed, slowly pull the fan pull-chain

switch to select the desired speed.

Light Operation:

Press and quickly release the ON or OFF button on the

remote control to turn the light OFF or ON.

Operation, Maintenance, and Cleaning

Light

Control

Fan

Control

Safe-Exit

• Press the Fan Off button for at least three seconds to

initiate the Safe-Exit Mode.

• The lights will ash for visual conrmation.

• The lights will stay on 50% brightness for 15 seconds and

then begin to dim. After a total of 30 seconds, the lights

will be completely off.

The Safe-Exit Program gives you about thirty seconds

of light when you turn the lights off to exit the room

before the lights go out. To use Safe-Exit:

www.HunterFan.com

1.888.830.1326

Before Getting Started:

If you have not downloaded the app, do so now.

Visit your app store and search simpleconnect then install.

Make sure a compatible receiver is already

installed in your fan. If you need more information, visit the Info

screen in the app.

Record the PIN.

Write down the PIN located on the plug-in controller. You

will need the PIN to complete step 5.

PIN:

Insert the plug-in controller to a wall outlet.

The plug-in controller works up to 80 feet

from the fan/receiver.

Launch the app.

Make sure Bluetooth® is enabled on your device before

launching the app.

Tap the Controller button in the app.

If you are installing multiple plug-in controllers, be sure

to tap the Controller button that coincides with the

correct plug-in control.

Enter the PIN.

The 4-digit PIN can be found on the plug-in controller.

Tap Done when nished.

Tap the Gear icon shown below.

Tap the Gear icon on the main screen to navigate to the

“Rooms Congured” settings screen.

Gear icon

www.HunterFan.com

1.888.830.1326

Tap the Gear icon shown below.

For independently operating fans, be sure to choose a

Gear icon for a room that is not already congured.

There is a maximum of four rooms per plug-in controller.

Gear icon

To prevent faulty operation, please disconnect power from all other

ceiling fans within range while performing the next three steps.

Go to Advanced Features. Tap the Pair button.

If your bulbs support dimming, you may also turn

on the dimming feature at this screen.

Cycle power to the fan.

Turn power off and back on at the wall (or circuit breaker

if necessary).

Step 10 must be completed WITHIN THREE MINUTES of

restoring power to the fan.

Tap OK to conrm pairing.

Note: The lights will ash (if

applicable) and the fan will turn

on at low speed. This is visual

conrmation that the pairing was

successful.

Congratulations!

You have successfully set up your

additional receiver. Tap the Back

button twice to begin using the app

to take control of your fan!

You can now reconnect power to

your other fans.

If you have questions about

using the app or about setup and

installation, visit the Info screen in

the app for FAQs, videos, tutorials,

and more.

www.HunterFan.com

1.888.830.1326

Maintenance & Cleaning

Turn Power

Changing the bulbs - unscrew

the nial and remove it from the

threaded rod. Remove the nial cap

and unscrew the globe keeper while

supporting the globe with your other

hand. Carefully remove the globe.

Unscrew bulbs and replace with

bulbs of same type and wattage.

Reinstall the globe assembly.

Changing the direction of air

ow - move the reverse switch

to the opposite position.

Cleaning the fan - use soft

brushes or cloths to prevent

scratching. Cleaning products

may damage the nishes.

Reverse

Switch

For questions regarding removing a light kit, call

customer service 1-888-830-1326.

Finial

Cap

Globe

Keeper

Metal

Plate

Globe

www.HunterFan.com

1.888.830.1326

Troubleshooting

Excessive wobbling

• Tighten all of the blade and

blade iron screws until they

are snug.

• Turn the power off, support

the fan carefully, and check

that the hanger ball is

properly seated.

• Use the provided balancing

kit and instructions to balance

the fan.

Noisy Operation

• Tighten the blade and blade

iron screws until they are snug.

• Check to see if any of the

blades are cracked. If so, replace

all of the blades.

Fan doesn’t work

• Make sure power switch is on.

• Pull the pull chain to make sure

it is on.

• Push the motor reversing switch

rmly left or right to ensure that

it is engaged.

• Check the circuit breaker to

ensure the power is turned on.

• Make sure the blades spin freely.

• Turn off power from the circuit

breaker, then loosen the canopy

and check all the connections

according to the wiring diagram

on page 9-10.

• Check the plug connection in

the switch housing.

If you wish to operate multiple fans with one plug-in controller:

1. You will need an additional compatible receiver (sold separately)

installed in each fan. Receivers can be purchased at www.HunterFan.com.

2. Complete the entire Setup process below for the rst fan.

3. Once setup is complete for the rst fan, tap the Gear icon on the main screen to

navigate to the “Rooms Congured” settings screen.

4. For each additional fan, perform steps 7-10 on this page to complete setup.

Hunter Fan 52259 Owner's manual

Brand: Hunter Fan

Model: 52259

Type: Owner's manual

This manual is also suitable for

52258

Hunter Fan 52259 is a new, high-quality ceiling fan that is perfect for any home or office. This fan comes with a variety of features that make it a great choice for any room, including:

Three speed settings (low, medium, and high)
Reversible motor for year-round comfort
Five blades for optimal airflow
Light kit adaptable
Remote control for easy operation
Limited lifetime motor warranty With its stylish design and powerful performance, the Hunter Fan 52259 is sure to keep you comfortable all year long.

Download PDF

report

Hunter Fan 52259 Owner's manual

This manual is also suitable for

Hunter Fan 52259 Owner's manual

Related papers

Other documents