Hunter Fan 50728 Owner's manual

Brand: Hunter Fan

Model: 50728

Category: Household fans

Type: Owner's manual

This manual is also suitable for

50804

Installation Manual

Model: 50728 Matte Black

50804 Matte Silver

Fan weight ±2 lbs: 16.8 lbs (7.6 kg)

Parkview

PG3861 r121919

1886

Ladder

9/64” Drill BitDrill

Screwdriver

Pliers

Wire Strippers

OPTIONAL

If mounting to a support structure, you will also need these tools.

Congratulations on purchasing your new Hunter

ceiling fan!

Here are the tools you’ll need to complete your installation:

The ceiling fan you purchased will provide comfort and performance in your home or ofce for many years. This instruction manual contains

complete instructions for installing and operating your fan. We are proud of our work and appreciate the opportunity to supply you with the

best ceiling fan available anywhere in the world.

We are here to help!

This Instruction Manual is designed to make installation as simple as possible. While working through this Instruction Manual, keep

your smartphone or tablet nearby. We have added video links to help you through the more technical sections. If you are unfamiliar or

uncomfortable with wiring, contact a qualied electrician. We also provide telephone support at 1.888.830.1326 or visit us

at HunterFan.com.

WARNING

READ and SAVE These Instructions

Warning

w.1 - To reduce the risk of re, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the

mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you

cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

w.3 – To reduce the risk of electric shock, this fan must be installed with an isolating wall control/switch.

w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between

rotating fan blades.

Caution

c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualied electrician.

c.2 - Use only Hunter replacement parts.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: modications not approved by the party responsible for compliance could void user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This product conforms to UL Standard 507.

7130 Goodlett Farms Pkwy, Suite 400

Memphis TN 38016

1886

Do not discard the hardware bags or mix parts from

different bags. Make note of the symbol printed on

each hardware bag. The symbols can be used to

identify the appropriate hardware for each step.

We recommend that you pull everything out of the box and lay it out. We have

grouped the drawn components below with the hardware you’ll need for those

parts. The screws below are drawn to scale to make it easier to identify what

piece of hardware is needed to install each component.

For installing the hanger bracket and wiring the fan

For installing the canopy

Canopy

Canopy Screw

Ceiling Bracket

Wood Screw

Wire Nut

Washer

bag

Hunter Pro Tip:

Find a part that is missing or damaged?

Don’t take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at 1.888.830.1326.

Here is what comes in your box:

bag

For installing the blades

For installing the light kit

Cover

Spare Parts

For your convenience,

you may receive extra fasteners.

bag

Light Kit Screw

Short Light

Kit Screw

bag

Downrod

Adapter Cover

Motor

M3790-01 r012420

Remote Components

Remote Control Remote Cradle

Fan style may vary.

Note:

Downrod

Upper Swith Housing

LED Module

Gasket

For installing the blades

Blade Screw

Blade Washer

bag

Blade

1886

Choosing the Right Installation Location

Checking the Ceiling Angle:

Angled Mounting

You probably bought this fan with a location in mind. Let’s check below to make sure it is a good t.

If you have an angled or vaulted ceiling:

1. You will need a longer downrod. (Sold separately at HunterFan.com)

2. If your ceiling angle is greater than 30°, you will also need an

Angled Mounting Kit. (Sold separately at HunterFan.com)

Check the room dimensions: Check the outlet box:

You must be able to

secure the fan to building

structure or fan-rated

outlet box.

30 in

from blade tip to

nearest wall or

obstruction

7 ft

from bottom edge

of blade to the

oor

Support

Structure

Ceiling

Outlet Box

(required)

Angled Mounting

If you have a at ceiling:

Hang your fan by a standard downrod. Some fans come

with a shorter downrod for a Low Prole installation.

Support Structure

Ceiling

Outlet Box

(required)

Standard Mounting

A little more information on Angled Mounting:

For optimum performance and appearance, a longer downrod should

be used with your Hunter ceiling fan when installing on high or angled

ceiling. If your ceiling is angled greater than 30° you will also need an

Angled Mounting Kit. Longer downrods and the Angled Mounting Kit are

sold separately at HunterFan.com.

Determining if you need an Angled Mounting Kit:

Fold on the dotted line. Place edge against the wall.

Slide towards the ceiling.

If the guide touches the wall but not the ceiling, you

need an angled mounting kit.

Hunter Pro Tip:

CEILING

30°

WALL

Installing the Ceiling Bracket

Installing the Downrod

1886

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Remote Troubleshooting

Check the outlet box:

Installing the Ceiling Bracket

Use wood screws and

washers (included) when

securing to support structure

with approved electrical

outlet box. Drill 9/64” pilot

holes in support structure

to aid in securing ceiling

bracket with hardware found

in the hardware bag.

Use machine screws (provided

with outlet box) and washers

when securing to existing ceiling

fan-rated outlet box. Make sure

it is securely installed and is

acceptable for fan support of 31.8

kg (70 lbs) or less.

Option 2:

Wood Screws

Option 1:

Machine Screws

OFF

Turn Power

Do this rst!

The machine screws are the ones

that came with your outlet box.

Hunter Pro Tip:

For angled ceilings,

point opening

toward peak.

ANGLED

MOUNTING TIP

bag

Wood Screw

Washer

You have two options for installation. Pick which one works best for your location. Remove

any existing bracket prior to installation. Only use the provided Hunter ceiling bracket that

came in your fan’s box.

Installing the Downrod

Follow below if you are using the downrod that came pre-assembled in your box. Need to

install a longer or shorter downrod? Check out the guide at the end of this manual.

STEP

Slide the adapter cover onto

the downrod until it rests

against the hanger ball.

STEP

Remove the pre-installed

setscrew so that the

downrod can be inserted.

STEP

Pass all wires to one side of horizontal bar in

downrod assembly. Hand tighten the downrod

(at least 4–5 full turns) until it stops. Trim the

wires coming from the fan so that 8-inches

remain coming from the top of the downrod.

Hunter Pro Tip:

The ground wire attached to the

downrod is approximately 8 inches.

8”

3/8”

(not to scale)

Tighten the setscrew

with pliers. DO NOT

HAND TIGHTEN.

STEP

Lower the adapter cover until it rests ush

against the motor housing.

The wires can be cut, but leave at least 8”

extending from the top of the downrod.

WARNING

To avoid possible electrical shock, before

installing your fan, disconnect the power by

turning off the circuit breakers to the outlet

box associated with the wall switch location.

Fan style may vary.

Note:

WARNING

FAN FALL HAZARD

To prevent SERIOUS INJURY or DEATH:

• ALWAYS tighten setscrew with pliers.

• DO NOT hand tighten setscrew.

• CHECK the setscrew is tight using pliers

each time you change fan direction.

1886

Hanging the Fan

Place the downrod ball into

the slot in the ceiling bracket.

NOTICE

To prevent damage to fan,

ALWAYS lift holding either the

fan housing or the downrod.

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Remote Troubleshooting

Fan style may vary.

Note:

Wiring the Fan

1886

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Remote Troubleshooting

Fan style may vary.

Note:

Wiring the Fan

We know wiring is hard. Let’s make it easier.

You are going to need these:

4 Wire Nuts (these are in the bag)

Follow these steps to get your fan wired quickly and safely. Follow the route below that best matches your wall switch

setup. If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a qualied electrician.

Have extra wiring?

Turn the wires upward and push them carefully back through

the hanger bracket into the outlet box. Make sure that the

wires are still attached to the wire nuts.

Hunter Pro Tip:

Here is how to connect the wires:

Push the bare metal ends of the wires together and slide a wire

nut over them. Then, twist the wire nut clockwise until tight.

Give it a gentle pull to make sure none of the wires are loose.

WARNING

All wiring must be in accordance with

national and local electrical codes ANSI/NFPA

70. If you are unfamiliar with wiring or in

doubt, consult a qualied electrician.

Connect the white

(grounded) wire

from the ceiling

to the white wire

from the fan.

Connect the black

(ungrounded) wire from

the ceiling to the black

wire from the fan.

Connect the three

grounding wires (green,

green/yellow stripe, or

bare copper) coming from

the ceiling, downrod, and

hanging bracket.

Black

Green/Yellow Stripe

White

Ungrounded

Grounded

Grounding

bag

Wire Nut

WARNING

The ceiling fan must be grounded. If the

ground wire for the installation site is not

present, immediately STOP installation and

consult a qualied electrician.

1886

Installing the Canopy

Lift the canopy into place so that

the screw holes are aligned.

Insert the two canopy screws

found in the hardware bag.

bag

Canopy Screw

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Remote Troubleshooting

NOTICE

If screw holes do not align

properly then rotate the canopy

180 degrees. Hanger ball shape

must match canopy opening for

correct canopy installation.

Installing the Glass

Assembling the LIght Kit

Fan style may vary.

Note:

Installing the Blades:

Attach each blade to a blade iron using the blade

washer, found in the hardware bag, and the blade

assembly screws, found in the hardware bag.

Repeat x3

bag

Blade Screw

Blade Washer

bag

1886

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Remote Troubleshooting

Installing the Glass

Lift the cover and align the

notches in the cover with the

two short light kit screws.

NOTE: Check to ensure

proper engagement.

Attach the cover by engaging light

kit screws and turning clockwise

one third of a full turn of the cover

until it stops.

Notch

Short Screws

WARNING

GLASS FALL HAZARD

To prevent SERIOUS INJURY or DEATH, make

sure that glass is properly secured.

Assembling the LIght Kit

Insert the third screw, found

in the hardware bag, into

place and then tighten all three

screws.

Partially install two light kit

screws, found in the

hardware bag, through the gasket

halfway into the motor housing as

shown. It does not matter which

two screw holes you choose.

Feed the wire plug through the

center hole of the upper switch

housing and gasket, then wrap

keyhole slots around the screws

and twist counterclockwise.

WARNING

FAN FALL HAZARD

Make sure all screws are tight to secure

the light xture.

2 of 3

Light Kit Screw

bag

1 of 3

Light Kit Screw

bag

Connect the single-pin connectors from the

LED assembly to the connectors from the fan.

Connect the white wires together. Connect

the blue and black wires together. Align the

keyhole slots in the light kit housing with the

two screws. Make sure all the wires from the

fan and the light kit are snug inside the center

of the light kit, not pinched in between the upper

switch housing and the light kit or hanging out

of the sides. Install two of the light kit screws

found in the bag.

2 of 2

Short Light Kit

Screw

bag

1886

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Remote Troubleshooting

Preparing the Remote

Installing the Remote Control Cradle

Once the power

is turned on, the the

remote must be remote must be

paired within 60 paired within 60

secondsseconds. Pairing

is only required

once after initial

installation.

Turn Power

ON ECE

1234

SET

Battery

Set

ON ECE

1234

ECEON

1234

SET

Battery

Door

(If a light kit is installed)

ON ECE

1234

SET

Light

Off

Fan

Speed

Dial

Reverse

LED

(Low)

(High)

(If light kit is

installed)

Remove battery door. Change the

dip switch settings if they match a

previously installed remote transmitter.

Install A23 or MN21 alkaline battery

in the proper polarity and replace the

battery door. To pair the remote, hold

down the Set button for 5 seconds.

Pairing is complete when LED button

ashes twice.

To select fan speed press

one of the numbers on

the Fan Speed Dial. To

calibrate the fan speed,

run the fan on “6” for 90

seconds after each AC

power reset. The LED light

ashes to indicate a signal

has been sent to the fan.

To install the

transmitter cradle,

hand-tighten the

provided screws to

mount the cradle

to the wall.

To reverse the air ow direction,

press the Reverse button while

fan is running. Press Light button

to turn lights off/on. To dim the

lights, press the light button for

more than one second. Light will

cycle from brightest to dimmest.

Release the light button when

desired brightness is achieved.

If a light kit is installed on your fan,

choose the light bulb mode by moving

the toggle switch. Move the switch

towards the “D” for CFL bulbs and

toward “ON” for standard bulbs.

Replace the battery door.

To change the battery, remove the

battery door. Remove battery and

replace with A23 or MN21 alkaline

battery. Please observe proper

polarity placement.

2 of 2

Cradle Screw

1886

Troubleshooting

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Remote Troubleshooting

Cleaning the Fan

Use soft brushes or cloths to prevent scratching.

Cleaning products may damage the nishes.

Hunter Pro Tip:

Fan Doesn’t Work

• Make sure power switch is on.

• Push the motor reversing switch rmly left or right to ensure that it is

engaged.

• Check the circuit breaker to ensure the power is turned on.

• Make sure the blades spin freely.

• Turn off power from the circuit breaker, then loosen the canopy and

check all the connections according to the wiring diagram.

• Check the plug connection in the switch housing.

Excessive Wobbling

• Make sure the blades are properly installed on the blade iron posts.

• Turn the power off, support the fan carefully, and check that the hanger

ball is properly seated.

• Use the provided balancing kit and instructions to balance the fan.

Remote Control of Fan is Erratic

• Make sure the battery is installed correctly.

• Install a fresh battery.

Remote Only Works Close to Fan

• Change battery.

Noisy Operation

• Make sure the blades are properly installed.

• Check to see if any of the blades are cracked. If so, replace all of the

blades.

Multiple Remote Issues

• If you have multiple remotes or multiple remote-controlled fans installed

on the same circuit breaker and you are experiencing interference or

faulty operation of your remote controls, please go to

www.HunterFan.com/FAQs and click “How do I properly install multiple

remote-controlled fans?” for information on how to correct this issue.

Hunter Fan Company grants this limited warranty to the original purchaser of this Hunter

ceiling fan. This document can be found at www.HunterFan.com.

Thank you for choosing Hunter!

How Can Warranty Service Be Obtained?

Proof of purchase is required when requesting warranty service. The original

purchaser must present a sales receipt or other document that establishes proof of

purchase. Hunter, at its sole discretion, may accept a gift receipt. To obtain service,

contact Hunter Fan Company online or by phone.

www.HunterFan.com/Support/Contact-Us/

1-888-830-1326

Please do not ship your fan or any fan parts to Hunter. Delivery will be refused.

What Does This Warranty Cover?

Motor — Limited Lifetime Warranty

If any part of your ceiling fan motor fails during your ownership of the fan due to a

defect in material or workmanship, as determined solely by Hunter, Hunter will provide

you with a replacement fan free of charge.* The foregoing limited warranty applies only

to the motor itself and does not apply to electronic controls – such as remote control

transmitters, remote control receivers, or capacitors – used in conjunction with the

motor. Such electronic control items are included in the one-year limited warranty below.

Other — One-Year Limited Warranty

Except as otherwise indicated throughout this warranty, if any part of your Hunter ceiling

fan fails at any time within one year of the date of purchase due to a defect in material

or workmanship, as determined solely by Hunter, Hunter will provide a replacement part

free of charge.*

Light Kits — Warranty May Vary

Light kits are included in the one-year limited warranty. However, you may qualify for

additional warranty coverage if your fan includes one of the following:

• LED Light Kits — Three-Year Limited Warranty

If your LED light kit module (not including glass components) or LED bulb

fails at any time within three years of the date of purchase due to a defect

in material or workmanship, as determined solely by Hunter, Hunter will

provide a replacement part free of charge.*

* If no replacement product/part can be provided for your fan, we will provide a comparable or

superior replacement product/part at the sole discretion of Hunter.

What Does This Warranty NOT Cover?

Labor Excluded. This warranty does not cover any costs or fees associated with the labor

(including electrician’s fees) required to install, remove, or replace a fan or any fan parts.

There is no warranty for light bulbs (except where otherwise noted); remote control

batteries; fans purchased or installed outside the United States; fans owned by

someone other than the original purchaser; fans for which proof of purchase has not

been established; fans purchased from an unauthorized dealer; ordinary wear and tear;

minor cosmetic blemishes; refurbished fans; and fans that are damaged due to any

of the following: improper installation, misuse, abuse, improper care, failure to follow

Hunter instructions, accidental damage caused by the fan owner or related parties,

modications to the fan, improper or incorrectly performed maintenance or repair,

improper voltage supply or power surge, use of improper parts or accessories, failure to

provide maintenance to the fan, or acts of God (e.g. ood).

ORIGINAL PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR A CLAIM OF ANY KIND

WITH RESPECT TO THIS PRODUCT SHALL BE THE REMEDIES SET FORTH HEREIN.

HUNTER FAN COMPANY IS NOT RESPONSIBLE FOR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, DUE TO PRODUCT FAILURE, WHETHER ARISING OUT OF BREACH OF

WARRANTY, BREACH OF CONTRACT, OR OTHERWISE. Some States do not allow the

exclusion or limitation of incidental or consequential damages, so the above limitation or

exclusion may not apply to you.

ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE APPLICABLE TO THIS PRODUCT ARE LIMITED IN DURATION TO THE PERIOD OF

COVERAGE OF THE APPLICABLE LIMITED WARRANTIES SET FORTH ABOVE. Some States

do not allow limitations on how long an implied warranty lasts, so the above limitation

may not apply to you.

How Does State Law Affect Warranty Coverage?

This warranty gives you specic legal rights. You may also have other rights which vary

from state to state.

Limited Lifetime Warranty

1886

Downrod

If you need a different downrod length follow these steps:

Follow steps 1-5 to remove standard downrod pipe

Follow steps 6-10 to reassemble with new downrod

1 2 3 4 5

678910

WARNING

FAN FALL HAZARD

To prevent SERIOUS INJURY or DEATH:

• ALWAYS follow the downrod assembly

instructions exactly.

• VERIFY the downrod is assembled correctly

by rmly pulling on the hanger ball.

Hunter Fan 50728 Owner's manual

Brand: Hunter Fan

Model: 50728

Category: Household fans

Type: Owner's manual

This manual is also suitable for

50804

Download PDF

report

Hunter Fan 50728 Owner's manual

This manual is also suitable for

Hunter Fan 50728 Owner's manual

Related papers

Other documents