User Manual
Drosbey LED Flood Light
Drosbey Super Brightness LED Flood Light is a part of Drosbey's continuing
pursuit for creating efficient and convenient lighting products for our customers.
New craft of LED chips provide Super Brightness, great replacement for
Halogen Bulb, saving over 80% on your electricity bill.
Technical specifications:
Brand Name: Drosbey Voltage: 85-265V AC
Current Frequency :60Hz Color: RGB
Waterproof Rate: IP66 Light Angle: 120 °
Working temperature: -20 ° ~ 45 ° C Energy efficiency class: A +++
Certification: CE, FCC, RoHS
How to Install the Lamp:
1. Tools Preparation
A. Self-tapping Screws and Screw Holders
B. Screw Drivers
C. Wire Connectors
D. Drill
Installation Steps:
1. To mark the hole onto the ceiling or wall , then drill the hole (Arrow marked)
2. To fix up the base with screws and screw holders, then connect the wire to
the connectors on the base
3. The white wire wiring “Neutral”, The black wire wiring “Live”, The yellow wire
wiring “Ground”.
Brand Introduction:
Drosbey lighting technology Co., Ltd., is a professional manufacturer with
more than 8 years experience, specialized in designing and making various
outdoor and indoor led lights,including flood lights,ceiling light,vanity
light,street lights,spotlights,high bay lights,tunnel lights etc. If you have any
questions, please do not hesitate to contact us via Amazon email, we will do
our best for you. It rewarded almost 100% positive customer review and we
provide 24 months warranty.
Attention:
1. If the product is damaged during transit or there are other problems with the
the brand new replacement asap, usually it will spend about 2 days to reach
you.
Installation:
Remote Controller:
/