AL9B Laminator Manual
Product Overview:
Thank you for your Apache purchase. All Apache products are designed to provide excellent function,
high quality, ease of use and stylish appearance. The AL9 laminator is an A4 class laminator which is
capable of laminating items up to 9” wide. The AL9 features an ultra compact stylish design with a
height of only 1.5”. Despite its small size, it still offers excellent performance features including a 4
roller design, a low 3-5 minute preheat time, and a laminating speed of .75PPM. It can laminate a
standard 8.5x11” document in 90 seconds. This laminator is an excellent choice for home and small
office environments and will protect your documents and photos from wear, tear, liquids, and humidity.
Key Features:
• Ultra Compact Design-1.5” Height
• 4 Silicone Rollers
• 3-5 Minutes Preheat Time
• Fast 90 Second Letter – Size Laminator Speed
• 9” Laminating Width
• Hot and Cold Laminating Mode
Specifications:
Model: AL9B
Power: 265W
Voltage: 110 Volt AC, 1.55 Amp
Speed: .75PPM
Working Temperature Range: Room Temperature (Cold Mode)-390.2°F (200°C)
Maximum Pouch Thickness: 0.6 mm Max/ 600mic Max / 23 mil Max
Weight: 2 LBS
Pre Heat Time: 3-5 minutes
LED’s: Red During Pre Heat Green When Ready
Certifications: IS09001 Designation
Warranty: 1 Year Manufacturer’s
Operation Instructions:
1. Plug in the power. There are two switches on the top of the unit, one to control the
power and another for the hot and cold settings.
2. Turn the power switch on and the power LED will illuminate. Select whether you would
like hot or cold lamination.
3. Preheat time is approximately 3-5 minutes depending on ambient temperature. While
the unit is preheating, the ready LED will be red. Once preheated, the ready light will
turn green and you can begin laminating your items.
4. Place the item you wish to laminate in a laminating pouch. Insert the laminating pouch,
pre-sealed end first, into the laminating machine process.
5. While laminating your items the green ready LED may turn off and back on as this is
normal during the laminating process.
6. It is recommended to use a carrier which is supplied by most laminating pouches. The
carriers help to keep the rollers clean from the laminating adhesive and protect your
document from jamming in the machine.
ATTENTION:
This laminator can reach high temperatures. Please operate in an open, dry place away from
heat sensitive materials. Do not place anything on or near machine when in operation. After
laminating, please set machine to cold mode and allow to run for 2 minutes to allow rollers to
cool. This helps to prevent the rollers from warping. To clean your rollers use laminator roller
cleaner pads available from your local office supply store. Please follow instructions included
with cleaner pads. The Limited Warranty applies to the laminator only. Apache Laminator is
not responsible for damaged to any other personal property.
-
1
-
2
-
3
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
GBC 4400431 Datasheet
-
Ledco Professor User manual
-
Royal Sovereign NB-1900N User manual
-
Demco PHOENIX 44 User manual
-
Ledco Signmaster 44 User manual
-
Fellowes Jupiter 125 User manual
-
MyBinding Prolam Wf Series Laminator User manual
-
Fellowes Voyager A3/125 Datasheet
-
Sencor SLA 301 User manual
-
