2. Lorex
  3. 393V261LCD
393V261LCD

Lorex 393V261LCD User guide

  • Hello! I'm a chat assistant familiar with the Lorex Floodlight V261LC Quick Start Guide. I've reviewed the document and can help you with questions about installation, features, and app usage. This document provides detailed instructions for setting up your HD Video Floodlight, including wiring, mounting, and configuring motion detection. I am ready to answer questions regarding this device.
  • What should I do before installing the floodlight?
    How do I access the memory slot and reset button?
    How do I reset the camera?
    What does the LED indicator flashing green mean?
Quick Start Guide
V261LC Series
lorex.com
HD Video Floodlight
Scan for
Lorex Home APP
HD Video Floodlight
Package Contents
Mounting Screws &
Anchors (×3)
Hooks
Mounting Bracket ;MVI'ETW
Bracket Screws
A and B (×2)
Phillips Machine Screw
AB
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use and handling of the product.
• Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh,
chemical-based cleaners.
• Use the product within given temperature, humidity and voltage levels noted in the
TVSHYGXƅWWTIGMƼGEXMSRW
•(SRSXHMWEWWIQFPIXLIƽSSHPMKLX
Safety Precautions
• Always follow code standards when installing wired connections.
•8LMWƽSSHPMKLXGEQIVEQYWXFIMRWXEPPIHSRE[EPPERHE90PMWXIHNYRGXMSRFS\
•8LMWƽSSHPMKLXMRGPYHIWER%YXS1IGLERMGEP-6'YX*MPXIV;LIRXLIGEQIVE
changes between Day/Night viewing modes, an audible clicking noise may be
LIEVHJVSQXLIƽSSHPMKLX8LMWGPMGOMRKMWRSVQEPERHMRHMGEXIWXLEXXLIGEQIVE
ƼPXIVMW[SVOMRK
•%YHMSVIGSVHMRK[MXLSYXGSRWIRXMWMPPIKEPMRGIVXEMRNYVMWHMGXMSRW0SVI\'SVTSVEXMSR
assumes no liability for use of its products that does not conform with local laws.
Disclaimers
CAUTION
6MWOSJƼVI
(SRSXMRWXEPPGEQIVERIEVƽEQQEFPISVGSQFYWXMFPIWYVJEGIW
6MWOSJIPIGXVMGEPWLSGO
(MWGSRRIGXXLITS[IVEXXLIJYWIFS\FIJSVIMRWXEPPEXMSR
8,-7():-')'3140-)7;-8,4%683*8,)*''690)734)6%8-32-779&.)'8838,)
*3003;-2+8;3'32(-8-327
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
FCC Notice
Need Help?
Visit us online for up-to-date software
and complete instruction manuals
Click on the (S[RPSEHW tab
4
Visit PSVI\GSQ
Search for the model
number of your product
Click on your product
in the search results
3
2
1
'ST]VMKLXk0SVI\'SVTSVEXMSR
%WSYVTVSHYGXWEVIWYFNIGXXSGSRXMRYSYWMQTVSZIQIRX0SVI\VIWIVZIWXLIVMKLXXS
QSHMJ]TVSHYGXHIWMKRWTIGMƼGEXMSRWERHTVMGIW[MXLSYXRSXMGIERH[MXLSYXMRGYVVMRK
any obligation. E&OE. All rights reserved.
LED Indicator
11.4”
290mm
Product Overview
PIR motion sensor
Speaker
Microphone
Camera
IR LED
Top cover
Light sensor
Memory slot*
Reset button**
Floodlights
Adjusting knobs
12.8” / 325mm
7.3” / 185mm
Front Panel
Back Panel
Behavior Meaning
(steady) Operating correctly.
ƽEWLMRK Ready for connection.
ƽEWLMRKVETMHP] Mobile device is attempting to connect to the camera.
(steady) Device malfunction. Try resetting the camera and repeating the setup.
ƽEWLMRK Network connection failed. Try resetting the camera and repeating the setup.
ƽEWLMRKVETMHP] Memory slot error. Try removing and re-inserting the included memory slot card,
or try a different card.
(alternating) Firmware upgrade in progress. * To access the memory slot and reset button, twist left to open the top cover.
** To reset the camera, hold down the reset button until the chime sounds and the LED Indicator turns red.
To prepare for installation:
Before assembly, there are important preparations to make.
Levelled to the ground
•TURN OFF POWER TO YOUR
FLOODLIGHT CIRCUIT AT THE
FUSEBOX TO ENSURE NO
POWER IS BEING SENT. If you
are unsure of which breaker
controls the circuit, then turn
off the main power switch.
If you do not know where
your breaker is or how to turn
off power, consult a licensed
electrician.
• Verify that the supply voltage
MWGSVVIGX'SRRIGXƼ\XYVIXSE
100 VAC~240 VAC 50/60 Hz
power source.
• DO NOT GSRRIGXƽSSHPMKLXXSE
HMQQIVW[MXGLSVXMQIV
• If you are not replacing a light
Ƽ\XYVI]SY[MPPRIIHXSVYR
power cabling to the install
location, and purchase a
90PMWXIHNYRGXMSRFS\JSVE
licensed electrician to install.
STEP 1: Preparation
10 Feet
32 Feet
1SYRXXLIƽSSHPMKLXGEQIVEJIIXQIXIVWLMKL[MXLXLI
motion detector levelled to the ground for optimal detection of
human-sized objects as far as 32 feet (10 meters).
6IGSQQIRHEXMSR
2I\XMRWXEPPXLIƽSSHPMKLXƅWQSYRXMRKFVEGOIX
STEP 2: Secure the Mounting Bracket
1. ;MXLXLITS[IVWLYXSJJVIQSZIXLII\MWXMRKPMKLXƼ\XYVIERH
bracket from the wall.
2. Disconnect the wires.
8SMRWXEPPHMVIGXP]XSENYRGXMSRFS\
8SMRWXEPPHMVIGXP]SRE[EPP
NOTE: Be sure to follow the “Front” / ”Up” directions on the mounting bracket.
3. Run the wires through the
middle of the supplied
mounting bracket.
4. Secure the mounting
bracket to your junction
FS\YWMRKone of the
FVEGOIXWGVI[W, A or B
depending on which
WM^IƼXW
3. Use the mounting bracket
as a template to mark 3
holes in a triangular pattern.
4. Use a 1/4” drill bit to drill in
the marked holes.
5. Gently tap the supplied
QSYRXMRKERGLSVW into
the drilled holes with a
hammer.
6. Align the bracket and use
a Phillips head screwdriver
to secure the supplied
QSYRXMRKWGVI[W into the
mounted anchors.
1
,ERKXLIƽSSHPMKLXGEQIVE from the
mounting bracket using
the supplied LSSOW.
2
The copper wire from the camera is ground wire.
'SRRIGXXLIKVSYRH[MVIXSXLII\MWXMRKKVSYRH
[MVIMRWMHISJ]SYVNYRGXMSRFS\
Use the supplied [MVIGET.
In the case that you are not wiring from a junction
FS\X[MWX]SYVKVSYRH[MVIEVSYRHXLIKVIIR
screw on the bracket.
3
The white wire from the camera is neutral
wire. Use a wire cap to GSRRIGXXLIRIYXVEP
[MVIWJVSQXLIGEQIVEERHNYRGXMSRFS\
The black wire from your camera is a hot
wire. Use a wire cap to GSRRIGXXLILSX
[MVIWJVSQXLIGEQIVEERHNYRGXMSRFS\
,SSOSRIIRHMRXS]SYVƽSSHPMKLXGEQIVE
Hook the other end into the bracket.
STEP 3: Connect the Wires
8S[MVIXLIƽSSHPMKLX
* Power wire colors in your home may be
different. In such a case consult a licensed
electrician.
IMPORTANT: 4VSTIVP]KVSYRHƼ\XYVI
A
B
2I\XMRWXEPPXLIƽSSHPMKLXGEQIVE
STEP 4: Secure the Floodlight
1. Carefully push all the wires through the middle opening of the bracket
MRXSXLINYRGXMSRFS\ERHWIGYVIXLIƽSSHPMKLXGEQIVE through the
middle hole using the 4LMPPMTWQEGLMRIWGVI[.
-RXLIGEWIXLEX]SYEVIMRWXEPPMRKXLIƽSSHPMKLXGEQIVEHMVIGXP]XSXLI
FVEGOIXƼXXLI[MVIWMRXSXLIFEGOSTIRMRKWSJXLIGEQIVE
2. %HNYWXXLIPIRWERHPMKLXERKPI using the adjusting knobs.
3. To enforce a water resistant seal, apply silicone compound around the
IRXMVITIVMQIXIV[LIVIXLINYRGXMSRFS\MWEXXEGLIHXSXLIFVEGOIX
4. =SYQE]RS[VIWXSVITS[IVEXXLIJYWIFS\
NOTE: -JXLIWXEXYW0)(SRXLIƽSSHPMKLXGEQIVEHSIWRSXXYVRSRGLIGO
to make sure wiring is done correctly.
*PSSHPMKLX4EWW[SVH
1. 3RGIXLIWXEXYW0)(SRXLIƽSSHPMKLXMWƽEWLMRKKVIIRXETNext in
XLI0SVI\,SQIETT8LIETT[MPPGSRRIGX]SYVQSFMPIHIZMGIXSXLI
ƽSSHPMKLXƅWLSXWTSX
2. 'VIEXIEWIGYVITEWW[SVHJSVXLIƽSSHPMKLX6IGSVH]SYVƽSSHPMKLX
TEWW[SVHFIPS[ERHWXSVIMREWIGYVIPSGEXMSR
3. 7IPIGX]SYV;M*M
network from the list,
XLIRIRXIVXLI;M*M
password to connect
]SYVƽSSHPMKLXXSXLI
Internet.
8SPMROXLIƽSSHPMKLX
4. 3RGIXLIWXEXYW0)(SRXLIƽSSHPMKLXMWWSPMHKVIIRXETNext to add
XLIƽSSHPMKLXXS]SYV0SVI\,SQIEGGSYRX
5. 7IXEREQIJSVXLIƽSSHPMKLXERHGSRƼKYVIHEXIXMQITVIJIVIRGIW
then tap 'SQTPIXI.
STEP 5: In-app Setup
2I\XGSRRIGXXLIƽSSHPMKLXGEQIVEXSXLI0SVI\,SQIETT
NOTE: -JXLI;M*M
connection is weak,
try moving your router
GPSWIVSVEHHMRKE;M*M
I\XIRHIV
1. Download and install the free 0SVI\,SQI app from
the App Store or Google Play Store.
2. 8ETXLI0SVI\,SQIMGSRXSPEYRGLXLIETT8ET7MKR
YT, then follow the on screen prompts to create an
account. Record your account details below and
WXSVIMREWIGYVIPSGEXMSR
)QEMP
%GGSYRX4EWW[SVH
3. ;EMXJSVXLIƽSSHPMKLXXSWXEVXYT8LMWQE]XEOIYTXSQMRYXIWEJXIV
reconnecting power at the breaker.
8SWGERXLI56GSHI
4. Once the status LED on
XLIƽSSHPMKLXMWƽEWLMRK
green, tap + MRXLI0SVI\
Home app.
5. Scan the QR code on the
WMHISJXLIƽSSHPMKLX
camera using your
mobile device’s camera.
NOTE: If your mobile
device cannot scan the
QR code, tap 1ERYEPP]
enter Device ID.
Overview of Lorex Home app
Back to
previous
screen
Device
settings
Device name
Lorex Floodlight
Pause / Play FullscreenViewing
modes
Mute /
Unmute
Streaming
quality*
Play back
recorded
video
Snapshot
Siren
Manual
recording
Light
[E]EYHMSXETXSWTIEOXETEKEMRXSHMWEFPI
* Change the streaming quality to SD7XERHEVH(IƼRMXMSRXSGSRWIVZIFERH[MHXL[LMPI
watching live video. This will not impact the quality of recorded video.
0MZIZMI[MRKWGVIIR 8SGSRƼKYVIXLIƽSSHPMKLXQSXMSRHIXIGXMSR
Overview of the most common screens and controls in the
0SVI\,SQIETT*SVGSQTPIXIMRWXVYGXMSRWSRYWMRKXLI
ETTWIIXLI0SVI\,SQIETTQERYEPSRXLIƽSSHPMKLXƅW
product page at PSVI\GSQ.
1. Tap Device Settings.
2. Tap Floodlight Settings.
3. Mode is set to Motion ActivationF]HIJEYPX8ETXSGLERKIXLIƽSSHPMKLXWJVSQ
being activated by motion detection to 1ERYEP1ERYEPP]XYVRXLIƽSSHPMKLXWSRERH
off in the live screen view.
4. Tap PIR Area
5. Light Duration is set to QMRYXIF]HIJEYPX8ETXSGLERKIXLIƽSSHPMKLXƅWPIRKXLSJ
time when activated from motion detection.
Slide the bar on the left to
adjust the distance at which
motion will activate your
ƽSSHPMKLXW
Tap the Zone(s) on or off to
activate motion detection
from three different areas.
Tap Save.
A.
B.
C.
A
B
C
/