2. Crystalfontz
  3. CFA800480E3-050SR-KIT
CFA800480E3-050SR-KIT

Crystalfontz CFA800480E3-050SR-KIT User guide

  • Hello! I've reviewed the Crystalfontz Quick Start Guide for the CFA800480E3-050SR display module, CFA10098 breakout board, Seeeduino development board and associated flat flex and jumper cables. I understand the guide details how to connect these components and set up the display. I'm here to help answer your questions about this product.
  • How do I connect the display module to the Breakout board?
    How do I ensure the voltage selection switch is set correctly?
    Where can I find more detailed product information?
Crystalfontz
CFA800480E3-050SR-KIT - Quick Start Guide
Page 1 of 2
Kit Contents
• 1x Crystalfontz CFA800480E3-050SR display module
• 1x Crystalfontz CFA10098 Breakout board
• 1x Seeed Studio’s Seeeduino development board (pre-programmed)
• 1x Crystalfontz WRFFCY50 flat flex cable
• 9x Crystalfontz individual WRJMPY40 female-female jumper cables
• Also required: A 5v power supply (such as your computer) and a USB cable (such as WRUSB27)
Quick Start
Step 1 -
Connect the display module to the Breakout board using the flat flex cable, as shown below. The blue
cable end is faced upwards on both the display and breakout board.
Step 2 -
The Seeeduino is supplied pre-connected to the Breakout board using jumper cables. If any of the cables
have accidentally become disconnected, reconnect as per the following diagram.
1. Open connector.
It flips up, it does
not slide
2. Slide in FFC
3. Rotate lock
down to secure
FFC
Crystalfontz
CFA800480E3-050SR-KIT - Quick Start Guide
Page 2 of 2
Step 3 -
Make sure the voltage selection switch on the Seeeduino is set at 3.3V.
Step 4 -
Ensure the boards are physically separated to avoid short circuits.
Connect the Seeeduino to a 5V power supply using the included USB cable.
The 5V power supply can be a computer, bench supply, a plug-pack style power supply, or similar.
Step 5 -
The display should now be lit, and displaying a demonstration program.
Further Information
See the Crystalfontz website for further information including full product datasheets and programming examples:
https://www.crystalfontz.com/product/cfa800480e3050srkit
We’re here to help! Email your questions to support@crystalfontz.com or post at forum.crystalfontz.com
We’d love to hear about your project! Tag us on Facebook, Instagram, LinkedIn, Twitter, or YouTube, or send us a link
to your project on the web!
Crystalfontz America, Inc.
12412 East Saltese Avenue
Spokane Valley, WA 99216-0357
Phone: 888-206-9720
Fax: 509-892-1203
Email: support@crystalfontz.com
URL: www.crystalfontz.com
/