2. WaterWay
  3. 10 Inch Reversible Lid
10 Inch Reversible Lid

WaterWay 10 Inch Reversible Lid User manual

  • I have reviewed the instructions for the 10" Reversible Lid for Skimmers and Autofillers. This document provides a step-by-step guide on how to install and use the lid, including filling it with material and securing it to the skimmer frame. I'm ready to answer your questions about it.
  • What skimmers does this lid fit?
    What should be done after filling the lid?
    What do you do after removing the plaster shields?
810-7800.0222
©2022 Waterway Plastics
2200 East Sturgis Road, Oxnard CA 93030 • Phone 805.981.0262 • Fax 805.981.9403
www.waterwayplastics.com • [email protected]
Designed,
Engineered &
Manufactured
in the USA.
10" Reversible Lid for Skimmers and
Autofillers Instructions
Read, then keep these instructions for future reference.
For more instructions, please consult your local building codes.
1. Insert supplied plaster shields. Pour the desired material into the
fillable side of the lid.
Fits all Waterway skimmers and autofillers and most
standard skimmers (Aqua star®, Hayward®, CMP®,
Sta-rite® & Pentair®)
3. Remove plaster shields.
5. Place frame on skimmer and set to desired elevation and level. 6. Install and secure lid to the frame with provided screws.
2. Agitate to settle and remove air bubbles in the material.
4. Gently wash to clean excess material from the lid, then let dry.
1. Frame
2. Reversible Lid
3. Screws
4. Plaster Shields
91
2
"
13
8
"
91
2
"
915
16
"
81
2
"
25
8
"
4
2
1
3
Read and follow all instructions
/