Jegs 4R70W-E Intermediate Spiral Snap Ring User manual

I have reviewed the provided document for the JEGS Snap Ring 555-60957. It describes a tempered carbon steel snap ring with a spiral design and integrated locking tabs. I'm ready to answer any questions you may have about its features or installation.
What material is this snap ring made of?

What is the design of the snap ring?

Does this snap ring have any locking mechanisms?

Intermediate Spiral Snap Ring

555-60957

1980 - On | Ford AOD, AODE, 4R70W/E, 4R75W/E

1

Introduction Installation

We would like to take this opportunity to thank you

for purchasing this JEGS Ford AOD, AODE,

4R70W/E, 4R75W/E Intermediate Spiral Snap

Ring Kit. We welcome any comments or feedback

you might have. If you have any questions about

this product or about the installation procedure,

please feel free to contact us at 1.800.345.4545.

Features

• Tempered carbon steel construction

• Easily installed spiral design

• Integrated locking tabs

This kit is designed to address

• Damage due to snap ring blow out

1. Insert one end of the spiral snap ring into the

groove working your way around until the

entire snap ring is in place.

NOTE

INSTALLATION OF THIS KIT REQUIRES

REMOVAL OF THE TRANSMISSION.

2.

Double check that the edge is secured by tabs.

/

Other documents