2. Blackview
  3. BV5200
BV5200

Blackview BV5200 User guide

  • Hello! I am an AI chatbot trained to assist you with the Blackview BV5200 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
User Guide Scan QR Code to get support
BV5200 Series
Content
About The phone
How to getting start
Rugged Phone features
Connect With Internet and Multimedia
Doke OS
Q&A
Safety Information
What's In The Box | Buttons and Connectors | Specication
Power On | Setup | Migrate datas | Insert SIM and SD card
Waterproof/drop-proof/dustproof | Customize
Wi | Cellular Data | Connet to PC | Screen Cast
Split Screen | Long Screen Shot | Lock&Unlock Apps | Game ModeApps
Blackview BV5200 comes with pre-installed Doke OS, our customized
Android based OS which provides frequent updates and user-friendly
features based on suggestions from over 10 million active users worldwide.
SAR | FCC | CE
info@blackview.hk Back to category
About The phone
What's In the Box
Type-C Charging Cable*1
Blackview BV5200*1 Anti-scratch Film protector
(Equiped on the screen)
EU Adapter User Mannual
Enjoy Smart Life
BV5200 Series
info@blackview.hk Back to category
Buttons and Connectors
Screen
Front Camera
Receiver
LED Spotlight
Volume +
Camera
SIM/ TF Card
Type-C Port
NFC
Speaker
Volume -
Power Key
Microphone
Flashlight
Function
Key
info@blackview.hk Back to category
Specication
Specs
Model BV5200
System Andorid 12
OS Doke OS 3.0
CE IP68&IP69K&MIL-STD-810H
RAM 4GB
ROM 32GB
Display Size 6.088 Inches
Resolution 720*1560
Rear Camera 13MP
Front Camera 5MP
Processor Quad Core
Battery capacity 5180mAh
Max charging current 5V2A
Weight 268 Gram
USB type Type-C
NFC YES
Slots 2 Nano sim & 1 SD
info@blackview.hk Back to category
Rugged Phone features
IP68&IP69K&MIL-STD-810H
IP68
IP69K
MIL-STD-810H
1.5m water
depth 30 minutes
waterproof
360 dust-proof
without deag
angle
1.5m anti folling
height
info@blackview.hk Back to category
Customize smart button functions
Start Soundrecording Open Underwater Camera
Open Game Mode
Open Flashlight
Open PTT
Screenshots
Open SOS
info@blackview.hk Back to category
Getting Start
Power On
Turn on your Blackview BV5200 by pressing and holding the <Power> button
(found on the right side of the phone) for a few seconds.
info@blackview.hk Back to category
Setup Wizard
Upon booting up, use Google Wizard to setup your Google account, sync,
setup.... Customize all the software buttons, gestures and other features
to your liking. If you later change your mind or need to make adjustments,
simply adjust all of the settings after setup in the settings menu.
info@blackview.hk Back to category
Migrating Data
Via Migration Asistant, you are able to migrate les and datas to your new
Blackview BV5200. All you have to do is install the app on the old device, scan
the QR code when prompted, and select the items you want to transfer.
info@blackview.hk Back to category
Insert SIM and SD card
1
2
1. Take out the card slot and place the Nano card or TF card with the metal
side facing down.
Make sure the bevel angle is aligned with the bevel angle of the card slot and
placed in the corresponding card slot.
2. With the phone facing up, insert the card holder into the
phone in the direction of the arrow.
3. Restart the smartphone.
info@blackview.hk Back to category
Connect Internet and Multimedia
Connect with Wi-Fi
1. Swip the Statusbar Down, long press Wi-Fi.
2.Tap a found network and enter
passwords to connect to it. When
connected, you’ll see in the
status bar.
3.When Wi-Fi is on, your phone
automatically reconnects to
available networks it has used
before.
info@blackview.hk Back to category
Connect with Mobile network
1. After inserting SIM card and
restart the phone, press the
to switch network on.
2. Switch Mobile Network in use
between two oprators.
a. Long prees to enter mobile network
settings.
b. Press Default access and choose oprator
corresponded.
info@blackview.hk Back to category
Connect with Mobile network
3. What sould I do if I can't connect with nerwork?
a. Check Statusbar to see if the signal is normal, if the signal simbol is poor, plese intend to move the
phone to dirent place.
b. If you can make phone calls but can't connect with internet. Please check APN settings, and call
your Telecom service provider for help.
How to set the APN: Click Settings - Click Sim card and mobile date - Choose Sim card - Click Access
point names - Choose APN - Click Password.
Please change the password to the last four digits of the phone number.
info@blackview.hk Back to category
Connect with a PC
You can charge your smartphone, share les and internet to PC via USB cable.
1.You will recieve a notication after insert the USB cable to PC, Tap it.
info@blackview.hk Back to category
Connect with a PC
2. Choose function you need.
.
Tansfer files to PC
Share Network to PC
Connect to instruments
Transfer Pictures to your PC
Only charge the phone
info@blackview.hk Back to category
Cast your screen to a TV
1. Long press to enter the interface of Screen Cast.
2. Press The three points to enable wireless display.
3. Then you will see Display that connecting to the same WLAN with BV5200,
Press to Cast.
info@blackview.hk Back to category
Doke OS
Split Screen
Blackview BV5200 comes pre-installed with Doke OS, our customized Android
based OS which provides frequent updates and user-friendly features based
on suggestions from over 10 million active users worldwide.
Enter the interface of multitask,
press the button made of three
points, opt Split Screen.
The app will be hang up and
you can choose antoher APP.
Swip the black bar to top o bottom
to close the mode of split screen.
info@blackview.hk Back to category
Long screenshoott
1. Press volume - and power button 1s to capture the screen.
2. Opt Long Screenshoot, then the screen will scroll down, tap the screen to
capture the screen.
info@blackview.hk Back to category
White list
By adding Apps to White list, you can keep them active in background, so
you can recieve messages at real time, otherwise, the system will clear apps
regularly for saving energy.
How to add Apps to White list?
If you don't want the system clean Apps automatically, you can shut it down.
Method 1. Enter interface of
Multitask, press the button in top
right, opt Lock, you can unlock apps
with the same opration.
Method 2. Enter interface of Multitask,
press the button in top right, opt
Manage, enter White List.
You can lock and
unlock Apps by
Taping
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/