2. GNB LAB
  3. 858-2
858-2

GNB LAB 858-2 User manual

  • Hello! I've analyzed the user manual for the GNBLab Nail dust collector 858-2. This document provides instructions on how to operate the device, including fitting the dust bag, turning the device on, and safe usage. It also advises on the device's maintenance. I'm ready to answer any questions you might have about it.
  • What should I do before connecting the device to the mains?
    Can I clean the device with water?
    What should I do after using the device?
IMPORTER
GNBLab
Michał Szewczyk, Piotr Malinowski s.c.
Piotrkowska 270
90-361 Łódź, Polska
gnb-lab.com
Made in P.R.C.
NAIL DUST COLLECTOR 858-2
- USER MANUAL
SPECIFICATIONS:
Max Power: 24W
Zasilanie:
Rated input: 100-240V 50-60Hz
Rated output: 110-220V
Maximum speed: 2300-2700rpm
Name: Nail dust collector
Model: 858-2
Certicate no: R011604967E, R011604967S.
Functions:
• Indispensable and indispensable tool for creating nail art and in podiatry.
• Easy to operate - just place your hands or feet near the fan opening and the dust will be absorbed.
• Ideal for both absorbing dust and fragments of nails or skin - from both hands and feet.
User manual:
1. Remove the unit from the packaging and check that the dust collection bag is ready for use.
2. If the bag has not been tted, it must be tted before the appliance is connected to the mains.
3. Switch the unit on using the switch. Once the fan starts working, you can bring your hands or feet close to the canister opening.
4. When you have nished using the device, switch o the unit and disconnect it from the power source.
Precautions and maintenance of the unit.
• Do not touch the fan during operation.
• The device can only be cleaned dry.
• Do not bend or pull the power cable.
• Connect the device to a network that complies with the device specications.
• Do not unplug the appliance from the mains while it is switched on and running. It must be switched o beforehand.
• Store and use in dry areas. Keep away from water, moisture. Otherwise the device may stop working and/or be damaged.
• When you have nished using the unit, unplug it from the mains supply.
• If the supply cable is damaged, it must be replaced with a new one of the same type at a service centre.
• It is forbidden to make unauthorised changes to the device.
• Opening the apparatus is categorically prohibited and will void the guarantee and the manufacturer assumes no responsibility for the
correct and safe operation of the device.
• Keep away from children.
/