GNB LAB 858-3 User manual

Brand: GNB LAB

Model: 858-3

Type: User manual

GNB LAB 858-3 is a professional nail dust collector designed to effectively remove dust and debris created during nail filing and drilling. Featuring a powerful dual-fan system with a maximum speed of 2700 rpm, this device efficiently captures dust particles, ensuring a clean and healthy work environment for nail technicians and their clients.

GNB LAB 858-3 is a professional nail dust collector designed to effectively remove dust and debris created during nail filing and drilling. Featuring a powerful dual-fan system with a maximum speed of 2700 rpm, this device efficiently captures dust particles, ensuring a clean and healthy work environment for nail technicians and their clients.

IMPORTER

GNBLab

Michał Szewczyk, Piotr Malinowski s.c.

Piotrkowska 270

90-361 Łódź, Polska

gnb-lab.com

Made in P.R.C.

PROFESSIONAL NAIL DUST COLLECTOR 858-3

- USER MANUAL

SPECIFICATIONS:

Max Power: 48W

Voltage: 220-240V, 50Hz

Maximum speed: 2 x 2700 rpm

Cable length: 1750 mm

Name: Nail dust collector

Model: 858-3

Certicate no: R011604967E, R011604967S.

User manual:

1. The input voltage must comply with the parameters of the device. Otherwise, it may be damaged.

2. Before connecting the power supply, the red switch should be set to the „OFF” position.

3. From the underside of the unit, place the bag over both fans taking care not to adhere to the fans. The fans should have some clearance

for proper operation.

4. Switch on the canister by pressing the „ON” button.

5. Use the canister in a dry place.

6. To maintain proper airow in the unit, keep an eye on dust and dust falling to the bottom of the bag.

7. SThe leather surface of the absorber should not be near high temperatures.

8. Use a damp cloth to clean the surface.

9. The equipment requires ongoing cleaning and maintenance.

Precautions and maintenance of the unit.

• Do not touch the fan during operation.

• The device can only be cleaned dry.

• Do not bend or pull the power cable.

• Connect the device to a network that complies with the device specications.

• Do not unplug the appliance from the mains while it is switched on and running. It must be switched o beforehand.

• Store and use in dry areas. Keep away from water, moisture. Otherwise the device may stop working and/or be damaged.

• When you have nished using the unit, unplug it from the mains supply.

• If the supply cable is damaged, it must be replaced with a new one of the same type at a service centre.

• It is forbidden to make unauthorised changes to the device.

• Opening the apparatus is categorically prohibited and will void the guarantee and the manufacturer assumes no responsibility for the

correct and safe operation of the device.

• Keep away from children.

1

GNB LAB 858-3 User manual

Brand: GNB LAB

Model: 858-3

Type: User manual

GNB LAB 858-3 is a professional nail dust collector designed to effectively remove dust and debris created during nail filing and drilling. Featuring a powerful dual-fan system with a maximum speed of 2700 rpm, this device efficiently captures dust particles, ensuring a clean and healthy work environment for nail technicians and their clients.

Download PDF

Related papers

Other documents