Page is loading ...
73mm
13 mm
.Hidden Embedding,the desktop does not
need to be damaged
.Smart and conveninent charging
.Easy for assembly for the hole of office desk in
the cafe/restaurant/airport/train station
Features:
Specification:
.Model:T8
.Input:DC5V-2A,9V-1.67A
.Wireless Output:5W 7.5W 10W 15W
.Standby energy consumption: 10mA
.Working frequency rang:110-205KHZ
.Transferefficency:73%(MAX)
.Launch distance:8mm
.Installation diameter:72mm
.Size:D73*13mm
.Weight:110g
.Authenticate:CE FCC ROHS
Wireless Desktop Charger
Use:
.Phone built-in or add a wireless receiver to it
.The led indicator remains red when connected
to the power and charges to blue after successful
connection.
.QI standard transmitter is charged automatically
once recognized approximately 5 secondsd.If you
put the offset distance 9mm not charge.
Inxtallation:
In office desk(Diameter 72mm)
Punch hoie diameter 72mm by professional people
It can be used on cafe/restaurant/airport/train station
Notice:
Insert the computer USB 2.0 is prohibited as small
current by computer.
USB 2.0 is the minimum requirement
Please remove the USB insert again if it can’t charge.
Mobile phone’s receiver must be on center,please.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environ
ment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
/
