Bernette Fabric-Feeding Aid User guide

Type
User guide
Fabric-Feeding Aid
for Sewing
Buttonholes
1
2
1
2
Information
Scope of delivery
1× Adapter plate (1) (Fig.1)
1× Feeding rail (2) (Fig.1)
Purpose
To improve the feed when sewing buttonholes with the buttonhole
foot with slide on thick and fluffy materials as well as on edges.
For your safety
Before using this accessory, please read this instruction manual as well
as the instruction manual of your machine carefully.
Application
How to use Fabric-Feeding Aid
> Raise the presser foot.
> Set needle to topmost position.
> Attach the adapter plate to the buttonhole foot with slide from the
front. (Fig.2)
> Push the feeding rail into the opening of the adapter plate from
below. (Fig.2)
> To measure the length, clamp the button in the buttonhole foot with
slide.
> Fit the buttonhole foot with slide.
www.bernette.com
5600009.00A.04 | 2022-05 EN
3> Position the fabric between the buttonhole foot with slide and the
feeding rail. (Fig.3)
> Set the buttonhole on the machine.
> Lower the presser foot.
> Lower the buttonhole lever. (Refer to the instruction manual of the
machine)
> Sew the buttonhole.
www.bernette.com
5600009.00A.04 | 2022-05 EN
  • Page 1 1
  • Page 2 2

Bernette Fabric-Feeding Aid User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI