INSTRUCTIONS
PORTABLE NECK FAN
COOLPOD
PACKAGE CONTENTS
• CoolPod neck fan
• Micro-USB charging cable
TECHNICAL SPECIFICATIONS
• Material: ABS
• Dimensions: 275 × 180 mm
• Weight: 180 g
• Power: 0.3–1.2 W
• Battery voltage: 3.7 V
• Charging input: DC 5 V, 1 A
FEATURES
1. Power button
2. Indicator light
3. Battery compartment
4. Charging port
HOW TO USE
• Before first use, completely charge the
battery. To charge the battery, use the
included charging cable and plug one end
into a charger or computer, and the other
end into the charging port (4) of the device.
• While charging, the indicator light (2) will
shine red. After charging is done, the light
turns blue. The neck fan is now ready to be
used.
• Hang the device around your neck so that
the two fans are turned towards your face.
Adjust the fans by gently bending the
silicone arms.
• To turn on the device, long-press the power
button (1).
• You can adjust the speed of the fans. Press
the power button repeatedly to switch
among the three speed levels (low, medium,
high).
• Long press the power button again to turn
off the device. The indicator light goes out.
WARNINGS
• Tie long hair in a braid or a ponytail.
Otherwise, it could get caught in the fan
blades.
• Do not expose the product to direct sunlight
or high temperatures.
• Make sure that the device is correctly
assembled and without any damage before
use.
• Do not expose to water or moisture.
• Children should not use the device by
themselves.
• Only use the product for its intended
purpose.
• Do not disassemble or modify the device in
any way.
• Only use the included USB charging cable.