2. Salto
  3. XS4
XS4

Salto XS4 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Salto XS4 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the minimum distance between Salto XS4 readers?
    What type of cable should be used to connect the Salto XS4 to the control unit?
    What is the maximum current consumption of the Salto XS4 reader?
    What is the operating temperature range for the Salto XS4 reader?
    What is the operating humidity range for the Salto XS4 reader?
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
225648 -ED.3 -14/11/2022
European view
©
2022 SALTO Systems S.L.
Installation guide
Panel reader
Installation
Installation Instalación Installation
Eng
DE
LIGHT AXIS
41
(1-5/8")
30
(1-3/16")
4
(3/16")
P1825
Installation guide
Installationsanleitung
Guía de instalación
Guide d'installation
D
Eng
E
F
F
PANEL READER
FIXING STICKER
6
O
5
P1825
ON
Application Anwendung Aplicación Application
Eng
DEF
ALIGNED
LIGHT AXIS
METAL
METAL
1
2-a 2-b
3
4 5 6
COVER
STICKER
10
(25/64")
Length: 3m
1/4
50 min.
60 min.
8 max.
45
(1-3/4)
30
(1-3/15)
The SALTO panel reader is designed to be integrated
behind lift panels, door intercoms, electric switches or
turnstiles and gates. It can be installed behind metal
plates but needs a window which is necessary for the
reader antenna operation. It works in conjunction
with SALTO controllers
86g
MODELS: ELECTRONIC INFO. WRDM0M - WRDM0J
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
225648 -ED.3 -14/11/2022
European view
©
2022 SALTO Systems S.L.
Installation guide
Panel reader
Cable type Reader
UTP Cat5e 2 pairs
AWG24
UTP Cat5e 4 pairs
AWG24 +
SP224861/SP224895
Note
2
Twisted pairs
AWG18
279ft
85m
853ft
260m
1312ft
400m
Eng
Cable type and
max. distances
Cable type Reader
Electrical characteristics:
RF characteristics
Min Max Unit
Reader 150 mA
Min Cen. Unit
RFID frequency 13.56 Mhz
Bluetooth Smart
frequency 2.4 2.445 Ghz
Note 1: Installer must take this data into account
to dimension the CU42xx power supply.
Panel Reader only for use with the SALTO Control
Units.
SALTO recommends to use one cable per wall
reader.
Power Consumption Note1
Cable type Reader
UTP Cat5e 2 pairs
AWG24
UTP Cat5e 4 pairs
AWG24 +
SP224861/SP224895
Note
2
Twisted pairs
AWG18
279ft
85m
853ft
260m
1312ft
400m
D
Verkabelung und max.
entfernungen
Kabeltyp Leser
Elektronische Eigenschaften:
RF Frequenzen
Min Max Einheit
Reader 150 mA
Min Cen. Unit
RFID frequenz 13.56 Mhz
Bluetooth Smart
frequenz 2.4 2.445 Ghz
Note1: Bitte beachten Sie die Stromaufnahme bei
der Planung des Netzteils für die CU42xx.
SALTO empfiehlt die Verwendung einer separaten
Leitung je Wandleser.
Stromaufnahme Note1
Cable type Reader
UTP Cat5e 2 pairs
AWG24
UTP Cat5e 4 pairs
AWG24 +
SP224861/SP224895
Note
2
Twisted pairs
AWG18
279ft
85m
853ft
260m
1312ft
400m
E
Tipo de cable y
distancias max.
Cable type Lector
Características eléctricas:
RF characteristics
Min Max Unidad
Lector 150 mA
Min Cen. Unit
Frecuencia RFID 13.56 Mhz
Frecuencia
Bluetooth Smart
2.4 2.445 Ghz
Nota1:El instalador ha de tener en cuenta la
dimensión del alimentador de la CU42xx.
SALTO recomienda utilizar un cable por cada lector
mural.
Consumo Nota1
Cable type Reader
UTP Cat5e 2 pairs
AWG24
UTP Cat5e 4 pairs
AWG24 +
SP224861/SP224895
Note
2
Twisted pairs
AWG18
279ft
85m
853ft
260m
1312ft
400m
F
Type de câble
Type de câble Lecteur
Caractéristique électronique:
RF characteristics
Min Max Unité
Reader 150 mA
Min Cen. Unit
Fréquence RFID 13.56 Mhz
2.4 2.445 Ghz
Note1:L'installateur doit calculer l'alimentation
nécessaire pour alimentere la CU42xx.
SALTO recommande d'utiliser un câble pour
chaque lecteur mural.
Consommation Note1
Einheit
Unidad
Fréquence
Bluetooth Smart
2/4
Min. Max. Unit
Temperature WRDP0B -30 70 ⁰C
Temperature WRDP0J -25 70 ⁰C
Humidity 35 85 %
Operation conditions
Max.
2.4835
Max.
2.4835
Max.
2.4835
Max.
2.4835
Min. Max. Einheit
Temperatur WRDP0B -30 70 ⁰C
Temperatur WRDP0J -25 70 ⁰C
Feuchtigkeit 35 85 %
Umgebungsbedingungen
Min. Max. Unidad
Temperatura WRDP0B -30 70 ⁰C
Temperatura WRDP0J -25 70 ⁰C
Humedad 35 85 %
Condiciones ambientales
Min. Max. Unit
Température WRDP0B -30 70 ⁰C
Température WRDP0J -25 70 ⁰C
Humidité 35 85 %
Condition de fonctionnement
213ft
65m
656ft
200m
984ft
300m
Note:
UL tested at 100m
at 24 AWG.
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
225648 -ED.3 -14/11/2022
European view
©
2022 SALTO Systems S.L.
Installation guide
Panel reader
READER 1
A
B
TAMPER
IN1
IN2
IN3
IN4
IN5
IN6
READER 2
RL1
RL2
RL3
RL4
C
NC
NO
C
NC
NO
C
NC
NO
C
NC
NO
BUS485
Ethernet
10Base-T
100Base-TX
ON
12V
DC
Input
+
A
B
-
12V
DC
Output (1A)
Power Input: 12VDC-1A
GND
GND
+
-
+
-
+
-
+
-
+
-
+
-
+
-
A
B
+
-
Model:
CU42E0
D
Eng
E
F
Installation example Installationsbeispiel Ejemplo de instalación Exemple d'installation
Same pair
Gleiches Paar
Mismo par
Même paire
Only connect to CU42xx
Nur für Steuereinheit CU42xx
Solo conectar a CU42xx
Connecter uniquement CU42xx
D
Eng
E
F
3/4
DE
Eng F
Model:
CU4200
Model:
CU4200
Model: CU42E0
Installation example CU42xx:
Installationsbeispiel CU42xx:
Ejemplo de instalación CU42xx:
Exemple d'installation CU42xx:
D
Eng
E
F
Installation example CU41xY:
Installationsbeispiel CU41xY:
Ejemplo de instalación CU41xY:
Exemple d'installation CU41xY:
D
Eng
E
F
BA V
Control Unit CU41xY
Same pair
Gleiche paar
Mismo par
Même paire
Same pair
Gleiche paar
Mismo par
Même paire
D
Eng
E
F
D
Eng
E
F
Minimum distance between readers 20in (50cm).
Mindestabstand zwischen Lesern 20in (50cm).
Distancia mínima entre los lectores 20in (50cm).
Distance minimale entre les lecteurs doit être de 20in (50cm).
D
Eng
E
F
D
Eng
E
F
READER 1
A
B
12V
DC
Input
TAMPER
IN1
IN2
IN3
IN4
IN5
IN6
READER 2
RL1
RL2
RL3
RL4
+
A
B
-
C
NC
NO
C
NC
NO
C
NC
NO
C
NC
NO
BUS485
Model:
CU4200
12V
DC
Output (1A)
ON
Power Input: 12V
DC
-1A
GND
GND
+
-
+
-
+
-
+
-
+
-
+
-
+
-
A
B
+
-
SP224861 SP224895
Eng
Installation example with RJ45 Installationsbeispiel für RJ45 Ejemplo de instalación RJ45 Exemple d'installation avec RJ45
D
Eng
E
F
D
Eng
E
F
Optional
Optioneel
Opcional
Optionnelle
D
Eng
E
F
Optional
Optioneel
Opcional
Optionnelle
Black
Schwarz
Negro
Noir
Red
Rot
Rojo
Rouge
DE
Eng F
Model:
CU4200
Model:
CU4200
Model: CU4200
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
225648 -ED.3 -14/11/2022
European view
©
2022 SALTO Systems S.L.
Installation guide
Panel reader
BA V
Control Unit
CU41xx
SP224895
Red
Rot
Rojo
Rouge
CU41xY
Installation example CU41xY with RJ45xx:
Installationsbeispiel CU41xY für RJ45:
Ejemplo de instalación CU41xY con RJ45:
Exemple d'installation CU41xY avec
connecteur RJ45:
D
Eng
E
F
D
Eng
E
F
Red
Rot
Rojo
Rouge
D
Eng
E
F
D
Eng
E
F
Optional
Optioneel
Opcional
Optionnelle
SP224895
D
Eng
E
F
Optional
Optioneel
Opcional
Optionnelle
/