Salto IQ2.0 Installation guide

Salto
Brand
Salto
Model
IQ2.0
Type
Installation guide
225452-ED1.-30/06/2021
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
©
2020 SALTO Systems S.L.
146
(5-3/4")
146
(5-3/4")
Eng
D
EInstallation guide
Guía de instalación
Montageanleitung
Guide d'installation
Guia de instalação
F
P
Installation Instalación Installation Installation Instalação
Eng
ED F P
1
ETHERNET + CELLULAR MODEL
a
2-a
Plug
Conectar
Verbinden
Branchez
Conectar
3-a
Plug
Conectar
Verbinden
Branchez
Conectar
4-a
Plug
Conectar
Verbinden
Branchez
Conectar
ETHERNET + WIFI MODEL
b
2-b
Plug
Conectar
Verbinden
Branchez
Conectar
Plug
Conectar
Verbinden
Branchez
Conectar
3-b
ETHERNET + CELLULAR MODEL ETHERNET + WIFI MODEL
ETHERNET + POE MODEL ETHERNET MODEL
a
c
b
d
1
2
1
2
1/4
( )Not included/
No incluido
/ Nicht enthalten/
Non inclus
/ Não incluso
*
**
Installation guide
IQ2.0
30
(1-316")
(x2) (x2)
PZ2
Not included/
No incluido
Nicht enthalten
Non inclus /
Não incluso
SP225764
Model: IQ223, IQ224
225452-ED1.-30/06/2021
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
©
2020 SALTO Systems S.L.
ETHERNET + POE MODEL
c
2-c
Plug
Conectar
Verbinden
Branchez
Conectar
3-c
Plug
Conectar
Verbinden
Branchez
Conectar
ETHERNET MODEL
d
2-d
Plug
Conectar
Verbinden
Branchez
Conectar
Plug
Conectar
Verbinden
Branchez
Conectar
4-d
Plug
Conectar
Verbinden
Branchez
Conectar
3-d
Installation guide
IQ2.0
2/4
SP225764
Not included /
No incluido /
Nicht enthalten /
Non inclus
Não incluso
IQ 2.0 SUPPORT
45
101
TORX 20
For installations on metal surfaces
Para instalaciones sobre superficies metálicas
Für die Montage auf Metalloberflächen
Pour installations sur des surfaces métalliques
Para instalações em superfícies metálicas
TORX 20
SUPPORT
c
OTHER CHARACTERISTICS:
WIFI
IEEE 802.11 b/g/n radio
BLE
Bluetooth 4.2 Compliant
Integrated antenna
TX power: up to +8dBm
RX sensitivity: down to -92dBm
Indoor range: 10-15m
POE
The POE connection complies to IEEE 802.3af
(max 15.40W, also known as 802.3a Type 1)
225452-ED1.-30/06/2021
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
©
2020 SALTO Systems S.L.
1
Installation guide
IQ2.0
Eng
D
E
Electrical features
Características eléctricas
Electrische espezifikationen
Caracteristiques electriques
Características eléctricas
F
P
OPERATION CONDITIONS
Min Max Unit
Temperature 0 40
ºC
2.4 Ghz RF CHARACTERISTICS
Frequency Range 2405-2480 Mhz (ISM band)
RF Standard IEEE 802.15.4
Indoor Radio Range 7m*
POWER SUPPLY CHARACTERISTICS
(To be fed only by an official SALTO Power Supply adapter
)
Unit
Input Voltage 12
V
Max Current 800
mA
To ensure a correct operation, do not install the device near a metallic surface.
Para asegurar un correcto funcionamiento, no instalar el dispositivo cerca de una superficie metálica.
Um einen einwandfreien Betrieb zu gewährleisten, installieren Sie das Gerät dann nicht in der Nähe von einer
metallischen Oberfläche.
Pour assurer un fonctionnement correct, n’installez pas l’appareil près d’une surface métallique.
Para assegurar o funcionamento adequado, não instale o aparelho perto de uma superfície de metal
3/4
*
(*) Depending upon installed environment. (*) Depending upon installed environment.
(PoE + WiFi variant might suffer range reduction of up to 30%).
225452-ED1.-30/06/2021
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
©
2020 SALTO Systems S.L.
LED Signals
IQ2.0
Blink long BLUE
Blink RED GREEN BLUE
Software reset
Factory reset
Blink short BLUE
IQ2.0 firmware update
Not valid subscription found
No connection to the cloud
Blink short GREEN
(2 minutes)
Blink long PURPLE
Blink long GREEN
Blink short RED
BLE connection is established
Until BLE connection is established
4/4
Permanent WHITE Factory mode
LED COLOUR STATUS INDICATIONLED MODE
Blink BLUE twice Normal Power Up
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Salto IQ2.0 Installation guide

Salto
Brand
Salto
Model
IQ2.0
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents