TIS TMR-AUT-T Automation Timer Installation guide

TMR-AUT-T Automation Timer
Brand
TIS
Model
TMR-AUT-T Automation Timer
Type
Installation guide

TIS TMR-AUT-T Automation Timer is a home automation component with a built-in timer, programmable flags, and logic lines. It offers advanced programming options, including longitude and latitude info for sunset/sunrise calculation. With 12 programming sections, 20 tables in each section, and 4 pins per table, it allows for versatile control scenarios. The device supports up to 64 devices on one line and features conditions like year, month, week, day, time, channel, curtain, universal switch, security, and flag switch.

TIS TMR-AUT-T Automation Timer is a home automation component with a built-in timer, programmable flags, and logic lines. It offers advanced programming options, including longitude and latitude info for sunset/sunrise calculation. With 12 programming sections, 20 tables in each section, and 4 pins per table, it allows for versatile control scenarios. The device supports up to 64 devices on one line and features conditions like year, month, week, day, time, channel, curtain, universal switch, security, and flag switch.

This product is a home automation component
with a built-in timer and programmable ags and
logic lines, designed for automatic presets and
scenarios.
6 58921 79869 0
BARCODE (UPC-A)
PRODUCT INFORMATION
TIS AUTOMATION TIMER
Module with Logic Programmability
INSTALLATION MANUAL
Model: TIS-AUT-TMR
PRODUCT SPECIFICATIONS
Logic
Conditions links AND, OR, NAND, NOR
Programming sections 12
Table in each sections 20
Pins of table 4
Conditions type If “year, month, week, day, time, channel, curtain,
universal switch, security, flag switch”
TIS Bus
Number of devices on 1 line
Max. 64
Bus voltage
12-32 V DC
Current consumption
<25 mA / 24 V DC
Protection
Reverse polarity protection
Function programmable
options
Commands 10 commands per table
Advanced Timer Longitude latitude info, setting for sunset sunrise
calculation
Dimensions Width × length × height 76mm × 69mm × 90mm
Housing
Materials Fireproof ABS
Casing color Black
IP rating IP 20
Air humidity <85% non-condensing
INSTALLATION MANUAL
MODEL : TIS-AUT-TMR
TIS AUTOMATION TIMER
2
www.tiscontrol.com
TIS CONTROL LIMITED
Wanchai, Hong Kong
TIS CONTROL PTY LIMITED
SA , AUSTRALIA
Copyright © 2022 TIS, All Rights Reserved
TIS Logo is registered trademark of TIS CONTROL.
All of the specification are subject to change without notice.
Mounting Location
Install in a dry, well-ventilated location.
Controllers may emit some mechanical
noise. Take this into account when deciding
on a mounting location.
Data Cable
Use screened stranded RS485 data cable
with four twisted pairs. Congure devices in
a “Daisy Chain.”
Do not cut or terminate live data cables.
Warranty
We provide a warranty as required by law.
A hologram warranty seal and product
serial number are provided on each device.
Please send the description of the defect
with Product S/N to our dealer network.
Read Instructions
We recommend that you read this
Instruction Manual before installation.
Safety instructions
Electrical equipment should only be
installed and tted by electrically skilled
persons.
Failure to observe the instructions may
cause damage to the device and other
hazards.
These instructions are an integral part of
the product and must remain with the end
customer.
Programming
Advanced programming requires TIS
Device Search software. Advanced
software programming knowledge should
be obtained in the advanced training
courses.
Simple Installation
DIN Rail mount facilitates installation.
Fixing points are provided for installation
without the use of DIN rail.
INSTALLATION MANUAL
MODEL : TIS-AUT-TMR
TIS AUTOMATION TIMER
3
www.tiscontrol.com
TIS CONTROL LIMITED
Wanchai, Hong Kong
TIS CONTROL PTY LIMITED
SA , AUSTRALIA
Copyright © 2022 TIS, All Rights Reserved
TIS Logo is registered trademark of TIS CONTROL.
All of the specification are subject to change without notice.
Turn off TIS power supply.
1WARNING! HIGH VOLTAGE
INSTALLATION STEPS
Mount the device on a DIN rail inside an
approved enclosure. The device can also
be installed without the use of DIN rail by
two mounting screw holes.
2
+24D+D-GND+24D+D-GND
Connect a Cat5e TIS network data cable
to the TIS-BUS port as per the connection
diagram. No need to loop the TIS-bus
cable if 2 DIN rail modules are connected
together from the side bus train terminal.
3
GND(white-orange)&(white-brown)
D-(white-green)&(white-blue)
D+(blue-green)
+24V(brown-orange)
Cat5e connection
To the TIS BUS Network
Cat5e
TIS-AUT-TMR
+24V
PRG
TIS-BUS
GND D- D+
INSTALLATION MANUAL
MODEL : TIS-AUT-TMR
TIS AUTOMATION TIMER
4
www.tiscontrol.com
TIS CONTROL LIMITED
Wanchai, Hong Kong
TIS CONTROL PTY LIMITED
SA , AUSTRALIA
Copyright © 2022 TIS, All Rights Reserved
TIS Logo is registered trademark of TIS CONTROL.
All of the specification are subject to change without notice.
TROUBLESHOOTING
PRG Button Blinks Red Color
Rapidly
Reason: The module’s address conicts with another
device in the TIS network. You need to press and hold
the PRG button for 6 seconds so the module can get
a new address.
Device PRG LED is not Blinking;
Device not Powered
Reason: Device is not powered on; no TIS-BUS 24V
supply connected to the device.
Wall Panels can’t Communicate
with the Device
Reason 1: The TIS-BUS connection has a problem;
check the wires and make sure there’s not a short in
the connection.
Reason 2: The programming address is wrong.
Device Time Resets to Default
Randomly
Reason: The built-in battery has expired. You need to
add an external battery or replace the built-in battery
with a new one.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

TIS TMR-AUT-T Automation Timer Installation guide

TMR-AUT-T Automation Timer
Brand
TIS
Model
TMR-AUT-T Automation Timer
Type
Installation guide

TIS TMR-AUT-T Automation Timer is a home automation component with a built-in timer, programmable flags, and logic lines. It offers advanced programming options, including longitude and latitude info for sunset/sunrise calculation. With 12 programming sections, 20 tables in each section, and 4 pins per table, it allows for versatile control scenarios. The device supports up to 64 devices on one line and features conditions like year, month, week, day, time, channel, curtain, universal switch, security, and flag switch.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents