2. Computers & electronics
  3. Cameras & camcorders
  4. Camera accessories
  5. Camera mounting accessories
  6. Solutions
  7. MS-C01

Solutions MS-C01 Installation guide

  • I have reviewed the user guide for the Ceiling Mount MS-C01 from M Solutions. This document provides detailed instructions on how to install the mount, including important notes about the screws needed for installation and the steps required to secure the device to the ceiling. I'm ready to answer your questions about this product.
  • What screws are included with the mount?
    What screws are not included?
    What is the first step of installation?
Installation Guide
MS-C01
Ceiling Mount
Revision: 1.0 - April 2022
02
support@m4sol.com | www.m4sol.com
MS-C01 USER GUIDE
What’s Included
Not Included
Pieces Item
1 Ceiling Mount
1Cross recessed, pan head with tail machine teeth
screw, UNC 1/4’’-20*8
6 Pan head, flat tail, self-tapping lock screws, M3*6
Pieces Item
4 *M5 Expansion screws
* These screws need to be provided by the installer based on the thickness of the ceiling.
Caution: It is the responsibility of the installer to ensure the camera and its mounting hardware are firmly
secured, so that the camera does not fall. Anchoring hardware appropriate to the wall type must be selected
and provided by the installer.
MS-C01 USER GUIDE
03
support@m4sol.com | www.m4sol.com
Installation
Step 1.
a) Position upper component of anchor on ceiling, and mark ceiling for placement (markers indicated in
steps 2 and 4).
b) Pre-drill holes in ceiling.
NOTE: Check depth of the mounting holes by inserting a straw or toothpick, and measure against the length
of screws.
Step 2.
a) Please top component of mount back over marking on ceiling.
b) Secure using M5 expansion screws (not included).
Step 3.
Secure bottom component of mount to the bottom of the camera, using included M3*6 screws.
04
support@m4sol.com | www.m4sol.com
MS-C01 USER GUIDE
Installation
Step 4.
a) Attach camera to mount.
b) Secure using M3*6.
www.m4sol.com
/