ZOSI C306 Pro User guide

Type
User guide

ZOSI C306 Pro is a versatile security camera that offers a range of features to enhance your home surveillance. With its built-in PIR sensor, it can detect and record human movement, reducing false alarms caused by pets or other non-human motion. The camera's spotlight and siren can be triggered by motion detection, deterring intruders and providing an extra layer of security. You can access live footage and receive alerts on your smartphone or tablet using the ZOSI Smart app, allowing you to monitor your property remotely.

ZOSI C306 Pro is a versatile security camera that offers a range of features to enhance your home surveillance. With its built-in PIR sensor, it can detect and record human movement, reducing false alarms caused by pets or other non-human motion. The camera's spotlight and siren can be triggered by motion detection, deterring intruders and providing an extra layer of security. You can access live footage and receive alerts on your smartphone or tablet using the ZOSI Smart app, allowing you to monitor your property remotely.

V1.W.01.Z
Smart Battery IP Camera
Quick Start Guide
For more information of this camera please refer to www.zositech.com
Contents
EN 01
ES 06
1
01/
Quick Start Guide
What's in the Box
Camera*1 Quick Start Guide*1
Mounng Screw Bag*1
Mounng Base*1
2
Camera 02 /
5
6
2
1
4
73
8
9
10
11
12 13
14
15
16
①Antenna
②HD Lens
③Infrared LEDs
Microphone
⑤Network Indicator
PIR Sensor
White LED Spotlight
⑧Adjusng Screw
Release Buon
Power Switch
Loudspeaker
⑫Charge Indicator
Micro SD Card Slot
⑭Retaining Screw
⑮Reset Buo n
Micro USB Port
Descripon of the Camera Network indicators:
Blue light on: The camera is paired or woken up
Red light fleshes slowly: Waing for pairing with NVR
Red light on: Low Baery
Red and blue lights off: In Standby
Descripon of the Camera Buons
Long press power buon for 1 second: Power-on/Power-off
Long press reset buon for 3 seconds: Reset to enter pairing state
(The red light flashes slowly aer the voice prompt)
3
Camera Installaon03 /
3.1 You can place it on any flat surface: table, chair, floor etc..
3.2 Install with Wall Mount (as shown in the figure)
3.2.1 Drill 5 holes according to the position of the mounting base,
and mount the base on the wall with the included pack of screws.
3.2.2 Lock the two slots on the camera base to the hook on mounting base.
4
3.2.4 Insert and tighten the screw on the bottom of the camera battery pack.
3.2.5 Use the included screwdriver to adjust the camera to a proper angle
and tighten the adjustment screw.
3.2.3 Install and tighten the safety set screw.
Adjusng Screw
Wall
Pair the Cameras with The NVR04 /
5
(1)Place the camera near the NVR at a distance of 30~100cm.
(2)In the power-on state, press and hold the reset button of the camera for 3-5
seconds, after hearing a voice prompt from the camera, open the NVR system
interface and use the camera to scan the QR code (Phone port number) for
pairing. After that, the camera will give out a voice prompt to indicate that
pairing success.
6
01/
Quick Start Guide
Lista de empaque
Cámara*1 Manual*1
Bolsa de tornillos*1
Base de montaje*1
7
Cámara 02 /
5
6
2
1
4
73
8
9
10
11
12 13
14
15
16
①Antena ⑤Luz indicadora de red Posición de extracción
de la batería
Ranura para tarjeta micro SD
②Lente PIR Botón de encendido ⑭Tornillo de fijación de la
batería
③LED IR Luz blanca de alarma Altavoz ⑮Botón de reinicio
Micrófono ⑧Tornillo de ajuste de
ángulo
⑫Luz indicadora de
carga
Puerto de carga de la batería
Descripción de luz indicadora de red:
Luz azul siempre encendida: la cámara se emparejó o acvó correctamente
Luz roja parpadea de forma connua y lenta: esperando el emparejamiento con el NVR
Luz roja siempre encendida: batería baja
Luz azul y luz roja siempre apagada: en espera
Descripción del botón de la cámara:
Mantenga presionado el botón de encendido durante 1 segundos: encendido o apagado
Mantenga presionado el botón de reinicio durante 3 segundos: reinicie e ingrese al estado de
emparejamiento (la luz roja parpadea de forma connua y lenta después del tono de aviso)
8
Instalar la cámara03 /
3.1 Se puede colocar en cualquier superficie de plataforma:
mesas, sillas, suelos, etc.
3.2 Instalación en pared (como se muestra en la figura)
3.2.1 Primero taladre 5 orificios en la pared y luego use los tornillos
para fijar la base de montaje en la posición de instalación deseada.
3.2.2 Bloquee las dos ranuras de la base de la cámara en la parte elevada de
la base de montaje.
9
Adjusng Screw
Wall
3.2.3 Utilice tornillos para bloquear la cámara y la base de montaje.
3.2.4 Apriete el tornillo en la parte inferior de la batería de la cámara para fijar
la batería.
3.2.5 Ajuste la cámara a un ángulo adecuado con un destornillador y apriete el
tornillo de ajuste.
10
Emparejamiento de cámara y NVR04 /
(1)Coloque la cámara con batería cerca del NVR, a una distancia de
30~100cm.
(2)Cuando la cámara está encendida, presione y mantenga presionado el
botón de reinicio durante 3-5 segundos. Después de escuchar el mensaje de
voz de la cámara, entre en la interfaz Sistema y escanee el código QR(ID del
dispositivo) con la cámara para el emparejamiento. Una vez que el
emparejamiento se haya realizado correctamente, la cámara emitirá un
mensaje de voz para indicar que el emparejamiento del código se ha
realizado correctamente.
All rights reserved. No part of this publicaon may be reproduced by any means
without wrien permission from ZOSI. The informaon in this publicaon is
believed to be accurate in all respects.
ZOSI cannot assume responsibility for any consequences resulng from the use
thereof. The informaon contained herein is subject to change without noce.
Revisions or new edions to this publicaon may be issued to incorporate such
changes.
www.zositech.com
F921011Z3006330
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

ZOSI C306 Pro User guide

Type
User guide

ZOSI C306 Pro is a versatile security camera that offers a range of features to enhance your home surveillance. With its built-in PIR sensor, it can detect and record human movement, reducing false alarms caused by pets or other non-human motion. The camera's spotlight and siren can be triggered by motion detection, deterring intruders and providing an extra layer of security. You can access live footage and receive alerts on your smartphone or tablet using the ZOSI Smart app, allowing you to monitor your property remotely.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages