Cal-Royal CAL-ROYAL VT51 Vinyl Thresholds User manual

CAL-ROYAL VT51 Vinyl Thresholds
Cal-Royal
Brand
Cal-Royal
Model
CAL-ROYAL VT51 Vinyl Thresholds
Type
User manual

This manual is also suitable for

1. Measure door opening at the sill by measuring the width of both rabbets.
2. Transfer measurement to threshold.
3. Cut the threshold to length. Notch ends of the the threshold to fit around the
stop on the door frame as necessary.
4. Trail fit the threshold to verify proper fit. Cut down if necessary.
Note: If using the threshold with carpet, insert carpet first into the threshold
opening before fitting it into place at the sill.
5. Apply glue to concrete or plywood sub floors before setting the vinyl threshold
in place.
Installation Guidelines:
VT51 Vinyl Thresholds
- Marker
- Measuring tape
- Caulking gun
- Cutting tools ( Miter saw,
circular saw, hacksaw)
Tools Required:
(12.70) (9.50)
(139.70)
6605 Flotilla Street, City of Commerce, CA 90040 U.S.A. | Website: www.cal-royal.com | Email: [email protected]
Phone: (323) 888-6601 ; (800) 876-9258 | Fax: (323) 888-6699 ; (800) 222-3316
Must be used as a
center section for:
2pcs of VT38, or
1pc VT38 and 1pc VT49
Applications:
Top (plan) view of door opening (out-swing type)
interior
exterior
door
building
wall
door
rabbet
door
stop
door opening width
from rabbet to rabbet
interior
exterior
building
wall
threshold
trim ends of threshold to fit
around door jambs & stops
VT38
VT51 (adjustable
center section)
VT38
VT38 VT49
VT51
Vinyl Thresholds
5 1
  • Page 1 1

Cal-Royal CAL-ROYAL VT51 Vinyl Thresholds User manual

CAL-ROYAL VT51 Vinyl Thresholds
Cal-Royal
Brand
Cal-Royal
Model
CAL-ROYAL VT51 Vinyl Thresholds
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents