MIMAKI TS300P-1800 User guide

Category
Networking
Type
User guide
Network Settings
Startup Guide
MIMAKI ENGINEERING CO., LTD.
URL: http://eng.mimaki.co.jp/
Version 1.
D202526-10
Notice
2
Notice
It is strictly prohibited to write or copy a part or whole of this document without our approval.
The contents of this document may be subject to change without notice.
Due to improvement or change of this software, the description of this document could be partially different
in specification, for which your understanding is requested.
It is strictly prohibited to copy this software to other disk (excluding the case for making backup) or to load
on the memory for the purpose other than executing it.
The customer is responsible for the communication fee for Internet communication such as e-mail notifica-
tion.
The notification by the event mail function may not be delivered due to Internet environment, failure of the
device/ the power supply, etc. Mimaki has absolutely no responsibility for any damages or loss resulting
from non-delivery or delays.
Microsoft, Windows, Windows 2000, Windows XP, Windows Vista, Windows Vista or Windows 8 are trade-
marks of Microsoft Corporation and other countries.
All brand names and product names are trademarks or registered trademarks of their respective companies.
About this manual
3
About this manual
This manual explains the setting procedures for connecting Mimaki printers and plotters compatible with net-
work functions to a network, and how to use them with that network by using a typical network configuration
as an example for this explanation
Network functions of Mimaki printers and plotters consist of the "Event Mail" and "Network Printing/Plotting"
functions.
Event Mail Function : Printer/Plotter unit function that notifies users by e-mail of operations such as
start, end, ink depleted and media jam during printing jobs.
Network Printing/Plotting Function:
Function that sends printing jobs to a printer/plotter unit from a personal
computer via a network.
Some functions might not be supported depending on the printer/plotter you are using.
For details, refer to the "Network Function Compatibility Table".
This document explains the network set-up procedure using Windows 7 as an example.
Symbol
About other NetworkConfigurator and Network Setting Guide
Although the Network Configurator is contained on the included manual CD, the most recent version can be
found on the Mimaki Engineering website (
http://eng.mimaki.co.jp/download/). Please download Ver. 1.2 or
later if the version of your current Network Configurator is Ver. 1.1 or earlier.
Version information for the Network Configurator is displayed on the title bar.
Indicates a caution you must observe when operating the product.
Describes a useful procedure.
Shows the number of the page that has related contents.
NetworkConfigurator Version
Table Contents
4
Table Contents
Notice ..................................................................................................... 2
About this manual ................................................................................. 3
Symbol ....................................................................................................................3
About other NetworkConfigurator and Network Setting Guide ...............................3
Using the Event Mail Function ............................................................. 5
Step1: Connect the Printer/Plotter and Personal Computer with the LAN ..............8
Step2: Check the Printer/Plotter Network Settings .................................................9
Step3:
Check the Network Settings of the Printer/Plotter and Personal Computer
....10
Step4: Install the Network Configurator ................................................................11
Step5: Specify Event Mail Items ...........................................................................15
Using the Network Printing/Plotting Function (With Automatic IP
Address Allocation) ............................................................................ 19
Step1: Connect the Printer/Plotter and Personal Computer with the LAN ............21
Step2: Check the Printer/Plotter Network Settings ...............................................22
Step3:
Check the Network Settings of the Printer/Plotter and Personal Computer
....23
Using the Network Printing/Plotting Function (With a Static IP Address)
.24
Step1: Connect the Printer/Plotter and Personal Computer with the LAN ............26
Step2: Specify the Static IP address in the Printer/Plotter ....................................27
Step3: Specify the static IP address in the personal computer .............................28
Step4:
Check the Network Settings of the Printer/Plotter and Personal Computer
....28
Using the Network Printing/Plotting Function
(If the Printer/Plotter and Personal Computer are Directly Connected by
using a LAN Cable) ............................................................................. 29
Step1:
Connect the Printer/Plotter and Personal Computer by Using a LAN Cable
...31
Step2: Check the Printer/Plotter Network Settings ...............................................32
Step3:
Check the Network Settings of the Printer/Plotter and Personal Computer
....33
Appendix 1.
Switching the IP Address Acquisition Settings of a Personal Computer
to Automatic ........................................................................................ 34
Appendix 2.
Switching the IP Address Acquisition Settings of a Personal Computer
to Static IP Address ............................................................................ 38
Using the Event Mail Function
5
Using the Event Mail Function
Model case
The network environment used as an example for explanation satisfies the following four conditions.
(1) The printer/plotter and personal computer are connected to a LAN that can automatically obtain an
IP address.
(2) The LAN described in (1) can be connected to the Internet.
*1
(3) The terminal receiving mail can be connected to the Internet.
*1
(4) You have your own mail account (Gmail cannot be used).
*1*2*3
*1. Although the above model case shows an example with an Internet-connected environment, an Internet-connected en-
vironment is not required if you have a mail server within your LAN and mail can be received from that LAN.
*2. A mail service (such as Gmail) that requires SSL communication with the source address cannot be used.
*3. Specify settings so that event mail is not judged to be spam mail by the spam mail filter. It is sufficient to specify settings
so that mail from the sending address is allowed to pass through the filter. If you are not sure how to specify the actual
settings, please inquire with the corresponding mobile phone company or administrator (provider) of the receiving mail
server.
Although this does not apply to this case, the event mail function can also be used with static IP
address allocation.
If a printer or plotter is compatible with both "Event Mail" and "Network Printing/Plotting" functions,
"Network Printing/Plotting" can be used by implementing the "Event Mail" settings. It is not
necessary to separately specify the "Network Printing/Plotting" settings.
Mail-receiving Terminal
Destination Mail Address
: LAN
Inter net
Printer / Plotter
Network HUB
Router
Model case
Inter net
Personal Computer
NetworkConfigurator
Using the Event Mail Function
6
Items you must provide
Internet-connected envi-
ronment
Contracted with Internet carrier or provider
Sending mail account
*1
*1. A mail service (such as Gmail) that requires SSL communication with the source address cannot be used.
Receiving mail
account
*2
*2. Specify settings so that event mail is not judged to be spam mail by the spam mail filter. It is sufficient to specify set-
tings so that mail from the sending address is allowed to pass through the filter. If you are not sure how to specify the
actual settings, please inquire with the corresponding mobile phone company or administrator (provider) of the re-
ceiving mail server.
Router
Network HUB Required amount of units
LAN cable Required amount of cables
Personal computer
Windows XP SP3, Windows Vista SP2, Windows 7 SP1, Windows 8, with
each one being 32/64-bit compatible
NET Framework 3.5 must be installed
Printer/Plotter
Mimaki product that is compatible with the network function (Refer to the
"Network Function Compatibility Table" for compatible models.)
NetworkConfigurator Network settings application provided by Mimaki
Using the Event Mail Function
7
Flow of Settings
The procedures for using the settings of the event mail function.
Step1
Connect the Printer/Plotter
and Personal Computer with the LAN ( P.8)
Step2
Check the Printer/Plotter
Network Settings ( P.9)
Step3
Check the Network Settings of the
Printer/Plotter and Personal Computer ( P.10)
Step4 Install the Network Configurator ( P.11)
Step5 Specify Event Mail Items ( P.15)
Using the Event Mail Function
8
Step1:
Connect the Printer/Plotter and Personal Computer with the LAN
Perform the following procedures with the printer/plotter and personal computer.
1
Connect the printer/plotter and personal computer to the network.
Printer / Plotter
Turn off the printer/plotter power, and connect the printer/plotter to the net-
work hub by using a LAN cable.
Refer to the "Names of Parts and Functions" section of the printer/plotter
operation manual if the LAN connector location of the printer/plotter is
unclear.
Personal
computer
Turn off the personal computer power, and connect the personal computer to
network hub by using a LAN cable.
Refer to the personal computer operation manual if the LAN connector loca-
tion of your personal computer is unclear.
Using the Event Mail Function
9
Step2: Check the Printer/Plotter Network Settings
1
Turn on the printer/plotter power.
2
From the printer/plotter operation panel, specify [ON] for DHCP
(automatic IP address acquisition).
Default setting is "ON".
3
Referring to the "Set the
network" section of the printer/
plotter operation manual,
check the IP address allocated
to the printer/plotter.
4
After checking, return to the <LOCAL> screen.
Operation differs depending on the model. For details, refer to the "Set the network"
section of the printer/plotter operation manual.
If the IP address is "169.254.*.*", either the LAN cable connection is faulty or the
environment is such that an IP address cannot be automatically obtained.
In such cases, consult the network administrator or installation personnel.
Chec k I P Add r e s s
192 . 168 . 100 . 101
Using the Event Mail Function
10
Step3:
Check the Network Settings of the Printer/Plotter and Personal Computer
1
Turn on the personal computer power.
2
Start up the command prompt.
(1) Click the Start button.
(2) Input [cmd] into "Search programs and files".
(3) Press the [ENTER] key.
3
Input "Ping (space) ‘IP address
of the printer/plotter you just
checked’" and press the
[ENTER] key.
4
Press the [Enter]key.
• If there is a response returned from the printer,
continue to "Step 4: Install the Network
Configurator" on page 11.
If no response is returned from the printer as
shown in the window on the right, perform the
procedures indicated in
"Appendix 1.
Switching the IP Address Acquisition Settings
of a Personal Computer to Automatic" on page
34. After which, perform the procedures of
"Step3: Check the Network Settings of the
Printer/Plotter and Personal Computer" again.
Only enter single-byte
characters.
Imput the “cmd”
Click
ping
Single-byte
space
IP address of the
printer/plotter
Using the Event Mail Function
11
Install the Network Configurator
Step4: Install the Network Configurator
Although the Network Configurator is contained on the included manual CD, the most recent version can be
found on the Mimaki Engineering website (http://eng.mimaki.co.jp/download/). Please download Ver. 1.2 or
later if the version of your current Network Configurator is Ver. 1.1 or earlier. (Refer to
Page 13 "Install from
the Mimaki Website")
Install from CD-ROM
1
Insert the "Operation Manual" CD-ROM that comes with the
printer/plotter into the CD-ROM drive.
2
Click "Network Configurator"
after the launcher starts up.
The screen is for CG-SRIII.
If the launcher does not start up, open the CD-
ROM drive in Explorer and double-click on
"Menu.exe".
3
After the folder containing the
"Network Configurator" opens,
copy the "Network
Configurator" to your desktop.
Click
Double click
Copy
Using the Event Mail Function
12
4
Click to close the
launcher.
Click
Close
Using the Event Mail Function
13
Install from the Mimaki Website
The actual download procedures might be different from the download procedures explained in the documen-
tation.
Follow the actual download procedures.
1
Download the Network
Configurator
(1) Access the Mimaki Engineering website
(
http://eng.mimaki.co.jp/download/), and
select "Driver/Utility" from "Download file
selection".
(2) Select the "model" and "series" being used
from the "Product type".
(3) Under "OS type", select the OS of the
personal computer to which the Network
Configurator will be installed, and click
[Search].
(4) Click on "Network Configurator v *.*" in the
search results.
(5) Click [Download] on the detailed search
results window.
2
Click .
3
Click when the
security warning window is
displayed.
Click
Click
Run
Click
Run
Using the Event Mail Function
14
4
Click .
5
Select "Desktop" as the
location to save the file and
click
.
6
Click .
7
"NetworkConfigurator.exe" is
extracted to your desktop.
The release notes and manual are also
extracted.
Click
Browse
Click
Select
OK
Click
OK
Using the Event Mail Function
15
Step5: Specify Event Mail Items
1
Double-click the icon on your desktop.
2
The printer/plotter information
is displayed in the Machine List.
Select the name of the printer/
plotter and click
.
3
Check [IP address (Info.)] on the
displayed Network Configurator
settings window.
Check that the displayed [IP address (Info.)] is the
same as the printer/plotter IP address that was
checked in procedure 3 of "Step2: Check the
Printer/Plotter Network Settings" on page 9.
It is not necessary to change the "Network Set-
tings".
If the printer/plotter information
is not displayed in the Machine
List, it is possible that the
printer/plotter and personal
computer have not been
properly connected to the
network. Refer to "’Not Found’
is displayed in the list box and
you cannot get the printer list,
or Communication cannot be
established with the machine of
the address input as the Direct
Address" troubleshooting
procedure under "Set the
Network", and perform the
corresponding recovery
procedures.
Click
Select
Select
Check
Using the Event Mail Function
16
4
Specify "Mail Server Settings"
Enter values for (1) to (7) that are appropriate for the environment you are using. If you do not know a set
value, refer to the mailer set values in Outlook 2010 or similar program.
(A) [Send to Address]: Enter the mail address of the event mail destination.
(B) [Mail Title]: Enter the mail title. This will be displayed as the title of received mail.
(6)Authentic Method
Do not select "OFF".
Specify "ON" for "APOP".
Use with the following combinations.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(A)
(B)
(1)
(2)
(4)
(5)
(6)
(3)
(7)
The values shown in these
windows are input examples.
Specify settings by replacing
with the set values of the mailer
you are using.
Example: Outlook 2010 Settings Window
Outlook 2007 Settings Network Configurator Settings
“My outgoing server (SMTP) requires authenti-
cation”: ON
Select "SMTP Auth."
“My outgoing server (SMTP) requires authenti-
cation”: OFF
Select “POP Before SMTP”
Using the Event Mail Function
17
5
Check "Event Mail Function"
to enable the event mail
function.
6
Use the "Event Mail Settings"
to select the event(s) for which
mail is sent.
• The details of each item differ for each model.
Refer to the printer/plotter operation manual.
Items that are not selected are grayed-out.
7
Click when settings
are completed.
8
Click in order
to check that mail is sent to the
destination address specified
in procedure 4.
A few minutes might be required for the mail to
arrive depending on various conditions. This does
not indicate a fault.
If the test mail is not received, send a test mail according to the "Send a test e-mail" in the
printer/plotter operation manual.
If an error code is displayed in the LCD of the printer/plotter, refer to the list of error codes
of "Send a test e-mail" in the printer/plotter operation manual and perform the
corresponding recovery procedures.
If no error code is displayed, refer to "E-mail can't be sent.(After the test mail is sent, an
error code isn't displayed.)" on page 7 of the Network Setting Guide.
Check
Click
Commit
Click
Test Mail Transmit
Using the Event Mail Function
18
9
Click .
10
Click .
Click
Exit
Click
Exit
Using the Network Printing/Plotting Function (With Automatic IP Address Allocation)
19
Using the Network Printing/Plotting
Function (With Automatic IP Address
Allocation)
Model case
The network environment used as an example for explanation satisfies the following condition.
(1) The printer/plotter and personal computer are connected to a LAN that can automatically obtain an
IP address.
Items you must provide
An Internet connection is not necessary.
It is assumed that the network to which the printer/plotter and personal computer are connected has
DHCP service enabled.
Router
A personal computer or server that can allocate an IP address can also be
used.
Network HUB Required amount of units
LAN cable Required amount of cables
Personal computer
Windows XP SP3, Windows Vista SP2, Windows 7 SP1, Windows 8, with
each one being 32/64-bit compatible
Printer/Plotter
Mimaki product that is compatible with the network function (Refer to the
"Network Function Compatibility Table" for compatible models.)
Internet
: LAN
: Internet
Printer / Plotter
Network HUB
Router
Model case
Personal computer
Using the Network Printing/Plotting Function (With Automatic IP Address Allocation)
20
Flow of Settings
Perform the following procedures to specify the settings required in order to use the network printing/plotting
function.
Step1
Connect the Printer/Plotter
and Personal Computer with the LAN ( P.21)
Step2
Check the Printer/Plotter
Network Settings ( P.22)
Step3
Check the Network Settings of the
Printer/Plotter and Personal Computer ( P.23)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

MIMAKI TS300P-1800 User guide

Category
Networking
Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI