Bticino H4594 Operating instructions

Bticino
Brand
Bticino
Model
H4594
Type
Operating instructions

Bticino H4594 is a ZigBee Certified Product with a 2.4 GHz Radiofrequency. It has a Manufacturer Specific Profile MESH networking with a range of 150m in point-to-point link and free field. It is an incandescent lamp that is dimmable.

The H4594 is simple to install and use. Here are some of its key features and possible use cases:

  • Easy to install: The H4594 can be easily installed by following the included instructions and wiring diagram.
  • Control your lights remotely: The H4594 can be controlled remotely using a compatible ZigBee bridge or hub. This allows you to turn your lights on or off, dim them, or create scenes from anywhere in your home.

Bticino H4594 is a ZigBee Certified Product with a 2.4 GHz Radiofrequency. It has a Manufacturer Specific Profile MESH networking with a range of 150m in point-to-point link and free field. It is an incandescent lamp that is dimmable.

The H4594 is simple to install and use. Here are some of its key features and possible use cases:

  • Easy to install: The H4594 can be easily installed by following the included instructions and wiring diagram.
  • Control your lights remotely: The H4594 can be controlled remotely using a compatible ZigBee bridge or hub. This allows you to turn your lights on or off, dim them, or create scenes from anywhere in your home.
H4594
LE04078AA
Caractéristiques
Kenmerken
Characteristics
Technische Daten
Caratteristiche
Características
Características
Montage
Montage
Mounting
Montage
Montaggio
Montaje
Montagem Démontage
Demontage
Dismounting
Demontage
Smontaggio
Desmontaje
Desmontagem
Lampe incandescente
Gloeilamp
Incandescent lamp
Glühlampe
Lampada incandescente
Lámpara incandescente
Lâmpada incandescente
Technologie
Radio fréquence 2,4 GHz – Produit certié ZigBee
Prol spécique au fabricant – Maillage de réseau sans l
Performance Portée : 150 m en champ libre point à point
Tecnologia
Radiofrequenza 2,4 GHz – Prodotto certicato ZigBee
Prolo specico del fabbricante – Maglie di rete senza li
Performance Portata: 150 m in campo libero punto a punto
Tecnologia
Produto certicado ZigBee de Radiofrequência 2,4 GHz
Perl especíco do fabricante de conexão à rede MESH
Desempenho Alcance: 150 m em ligação ponto a ponto e em campo livre
Technologie
2,4 GHz Hochfrequenz ZigBee Zertiziertes Produkt
Herstellerspezisches Prol Vermaschtes Netz
Leistung Reichweite: 150 m bei Punkt-zu-Punkt-Verbindung und im Freifeld
Technology
2.4 GHz Radiofrequency ZigBee Certied Product
Manufacturer Specic Prole MESH networking
Performance Range: 150 m in point-to-point link and free eld
Tecnología
Producto certicado ZigBee con 2,4 GHz de radiofrecuencia
Red de malla con perl especíco de fabricante
Rendimiento Alcance: 150 m en conexión punto a punto y en campo libre
Technologie
Product met een radiofrequentie van 2,4 GHz en ZigBee-certicering
Fabrikantspeciek proel MESH-netwerking
Prestaties Bereik: 150 m in punt-tot-puntverbinding en in het vrije veld
+5°C
+45°C
110 VAC
230 VAC
50/60 Hz
2 x 2.5 mm
2
230 VAC
Max.
600 VA
Min.
40 VA
110 VAC
Max.
300 VA
Min.
20 VA
2
+
Consignes de sécurité
Avant toute intervention, couper le courant.
Respecter strictement les conditions d’installation et d’utilisation.
Veiligheidsvoorschriften
Onderbreek voor enige ingreep de stroom.
Neem de installatie- en gebruiksvoorwaarden nauwgezet in acht.
Safety instructions
Make sure the power supply is disconnected before any intervention.
Strictly comply with instructions for installation and use.
Sicherheitshinweise
Vor jeglichem Eingri die Spannungsfreiheit sicherstellen.
Einbau- und Gebrauchsanleitungen sind genau zu beachten.
Consignas de seguridad
Antes de realizar cualquier intervención, cortar la corriente eléctrica.
Respetar estrictamente las condiciones de instalación y uso.
Instruções de segurança
Antes de qualquer intervenção, desligar a corrente.
Respeitar rigorosamente as condições de instalação e de utilização.
Istruzioni di sicurezza
Prima di qualsiasi intervento, interrompere l’alimentazione.
Rispettare scrupolosamente le condizioni d’installazione e uso.
Bouton RÉSEAU
«NET»-knop
NETWORK Button
NETZWERK-Taste
Pulsante RETE
Botón de RED
Botão “REDE”
LED RÉSEAU
«NET»-led
NETWORK Led
NETZWERK-Leuchtdiode
LED RETE
LED de RED
Led “REDE”
Bouton mode APPRENTISSAGE
«LEARN»-knop
LEARN Button
LEARN-Taste
Pulsante modalità APPRENDIMENTO
Botón LEARN
Botão LEARN
LED témoin d’APPRENTISSAGE
LEARN Led
«LEARN»-led
LEARN-Leuchtdiode
LED APPRENDIMENTO
LED LEARN
Led LEARN
Var-
Var+
On/O
The directive 1999/5/CE of the european parliament
and of the council of March 9th, 1999
EN 301 489
EN 300 328
EN 60669-2-1
CONFORMITY DECLARATION
We declare that the products satisfy the provisions of :
On condition that they are used in the manner intented and/or in accordance with the current installation
standards and/or with the manufacturers recommandations
These provisions are ensured for directive 1999/5/CEE by conformity to the following standards :
Channel availability depends on local country regulations. Wireless LAN system administrator must choose
correct country of operation. Channels are then automatically configured to comply with specified
country's regulations.
NL
+
L
N
+
-
N
10 V
Câblage
Kabelwerk
Cabling
Verdrahtung
Cablaggio
Cableado
Cablagem
Attention :
- Il est nécessaire de raccorder une charge avant d’utiliser le produit en mode apprentissage pour
un scénario donné.
- Les transformateurs ferromagnétiques doivent être chargés à plus de 60% de leur puissance
nominale.
- Lors du calcul de la puissance admissible, il faut prendre en compte le rendement des
transformateurs ferromagnétiques.
(exemple : transformateur pour une lampe de 50 W avec un rendement de 0,78
=> la puissance réelle consommée par le transformateur = 64 VA).
Importante:
- Deverá ser conectada uma carga antes que qualquer memorização seja efectua-
da para o produto num cenário.
- Os transformadores ferromagnéticos devem ser carregados a mais de 60% da sua potência
nominal.
- Durante o cálculo da potência admissível, deve ser levado em conta o rendimento dos
transformadores ferromagnéticos
(exemplo: transformador para uma lâmpada de 50 W com uma eciência de 0,78 => potência
real consumida pelo transformador = 64 VA).
Importante:
- Debe estar conectada una carga antes de que se produzca cualquier aprendi-
zaje del producto en un escenario.
- Los transformadores ferromagnéticos deben estar cargados a más de 60% de su potencial
nominal.
- Al calcular el potencial admisible, hay que considerar el rendimiento de los transformadores
ferromagnéticos (ejemplo: un transformador para una lámpara de 50 W con una eciencia de
0,78 => potencia real consumida por el transformador = 64 VA).
Attenzione:
- È necessario collegare un carico prima di utilizzare il prodotto in modalità apprendimento per
uno scenario dato.
- I trasformatori ferromagnetici devono essere caricati oltre il 60% della loro potenza nominale.
- Al momento del calcolo della potenza ammessa, bisogna tener conto del rendimento dei
trasformatori ferromagnetici.
(esempio: trasformatore di una lampada da 50 W con rendimento di 0,78 => la potenza reale
consumata dal trasformatore = 64 VA).
Important:
- A load must be connected before any learning takes place for the product in a scenario.
- Ferromagnetic transformers must be charged to over 60% of their nominal power.
- When calculating the admissible power, take into account the yield of the ferromagnetic
transformers
(example: transformer for a 50 W lamp with an efficiency of 0.78 => actual power consumed
by the transformer = 64 VA).
Wichtiger Hinweis:
- Vor dem Einlernen des Geräts in ein Szenario unbedingt einen Verbraucher anschließen.
- Konventionelle Trafos müssen mit über 60% ihrer Nennleistung belastet werden.
- Bei der Berechnung der maximalen Leistung ist der Wirkungsgrad der konventionellen Trafos zu
berücksichtigen (z.B.: Trafo für eine 50 W Lampe mit einem Wirkungsgrad von 0,78 => vom Trafo
aufgenommene Wirkleistung = 64 VA).
Belangrijk:
- Er moet een belasting zijn aangesloten voordat in een scenario elementen worden ingelezen.
- De ferromagnetische transformatoren moeten voor meer dan 60% van hun nominale vermogen
geladen zijn.
- Bij de berekening van het toelaatbare vermogen moet het rendement van de ferromagnetische
transformatoren in aanmerking worden genomen
(voorbeeld: transformator voor een lamp van 50 W met een rendement van
0,78 => feitelijk vermogen dat door de transformator wordt verbruikt = 64 VA).
3
L
N
A
L
N
A
+
+..
.
.
.
B B
3 mm max.
3s
LEARN
NETW.
LEARN
NETW.
LEARN
NETW.
L
N
L
N
L
N
L
N
A
C
A
C
OFF ON SLOW FLASHING (1s) QUICK FLASHING (0.25s) FLASHING MODE (60ms) 3 PULSE / 3s
Network
Created
4
L
N
LEARN
NETW.
L
N
L
N
B
B
A
B
A
A
+
+..
.
.
L
N
L
N
L
N
L
N
L
N
A
C
C
B B
A
C
B
L
N
L
N
C
C
10s
OFF ON SLOW FLASHING (1s) QUICK FLASHING (0.25s) FLASHING MODE (60ms) 3 PULSE / 3s
Push and learn
Binding
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Bticino H4594 Operating instructions

Bticino
Brand
Bticino
Model
H4594
Type
Operating instructions

Bticino H4594 is a ZigBee Certified Product with a 2.4 GHz Radiofrequency. It has a Manufacturer Specific Profile MESH networking with a range of 150m in point-to-point link and free field. It is an incandescent lamp that is dimmable.

The H4594 is simple to install and use. Here are some of its key features and possible use cases:

  • Easy to install: The H4594 can be easily installed by following the included instructions and wiring diagram.
  • Control your lights remotely: The H4594 can be controlled remotely using a compatible ZigBee bridge or hub. This allows you to turn your lights on or off, dim them, or create scenes from anywhere in your home.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents