Page is loading ...
Page is loading ...
INSTRUCTIONS FOR KIT USAGE
•Remove any spillage from
the lid before opening.
Let the hob surface cool
down before closing the
lid.
Lid
•Do not change the specification of the
lid.
•Clean the lid regularly.
•Do not open the lid, when there are spills
on the surface.
•Before you close the lid turn all burners
off.
• Glass lids can shatter, when heated.
ASSEMBLING THE LID
How to assemble the lid:
1.
Remove the screws or plugs from the
holes at the back of the hob
2.
To assemble the gaskets (fig. 2), you
need to lock them with the supplied
screws (fig. 1).
3.
Put the left hinge of the cover (marked
S) into the cover gasket of the correct
shape (fig. 3).
4.
Do the same procedure for the right
hinge of the cover (marked D).
5.
Put the cover into the right and left
supports (fig. 1).
Adjustment of the cover
balancing
You can adjust the cover balancing. Use
the screwdriver to do that. Turn the center
screw of the right and left hinges clockwise
or counterclockwise (fig. 3).
Fig.1
Fig.2
Fig.3
3
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Zanussi ZHLFLAT60B User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- italiano: Zanussi ZHLFLAT60B Manuale utente
- français: Zanussi ZHLFLAT60B Manuel utilisateur
- español: Zanussi ZHLFLAT60B Manual de usuario
- Deutsch: Zanussi ZHLFLAT60B Benutzerhandbuch
- Nederlands: Zanussi ZHLFLAT60B Handleiding
- português: Zanussi ZHLFLAT60B Manual do usuário