Page is loading ...
Page is loading ...
SAFETY INSTRUCTIONS
• Remove any spillage from the lid before
opening. Let the hob surface cool down
before closing the lid.
• Do not change the specification of the
lid.
• Clean the lid regularly.
• Do not open the lid, when there are spills
on the surface.
• Before you close the lid turn all burners
off.
• Glass lids can shatter, when heated.
• Do not use harsh abrasive cleaners or
sharp metal scrapers to clean the glass
of hinged lids of the hob since they can
scratch the surface, which may result in
shattering of the glass.
ASSEMBLING THE LID
• Remove the screws or plugs from the
holes at the back of the hob.
• Assemble the gaskets, put attention to
the assembly direction as shown in fig.
2, lock the cover supports, use provided
screws (fig. 1).
• Put the left hinge of the cover (marked S)
into the cover gasket of the correct
shape (fig. 3).
• Do the same procedure for the right
hinge of the cover (marked D).
• Put the cover into the right and left
supports (fig. 1).
1.
2.
3.
ADJUSTMENT OF THE COVER BALANCING
You can adjust the cover balancing. Use
the screwdriver to do that. Turn the center
screw of the right and left hinges clockwise
or counterclockwise (fig. 3).
4
USING THE ACCESSORIES
WARNING! When the lid is
assembled, the maximum pots
diameter to put on the rear
burners must be 22 cm, as
shown in the pictures.
1.
MAX 22 cm
2.
MAX 22 cm
ENVIRONMENTAL CONCERNS
Recycle the materials with the symbol .
Put the packaging in applicable containers
to recycle it. Help protect the environment
and human health and to recycle waste of
electrical and electronic appliances. Do not
dispose appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
5
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/