42968801

Kmart 42968801, Power Station User manual

  • Hello! I have reviewed the user manual for the anko Power station 42968801. This document outlines the features of this portable power device, including its built-in LED light, radio, and MP3 capabilities. It also provides instructions on charging, usage, and important safety precautions. I'm ready to answer any questions you may have about the device based on the information provided in the manual.
  • What is the charging time for the power station?
    What is the working time for the LED light?
    How do I charge the power station?
    What does it mean when indicator changes to red?
    What is the recommended operating temperature range?
Power Station
Keycode: 42968801
Please read and understand this manual before using the Power station
1. Handle
2. LED light
3. Function board
4. Switch button
5. Decorative sheet
6. LCD
7. Speaker
8. Positive terminal
9. Negative terminal
Technical Specification
1. 18pcs 0.2W LED
2. With 12V 7Ah rechargeable battery inside
3. Charging time: 21-27hs
4. Working time: LED22H; Radio: 50H
5.
DC input: 5V
6.
Product size: 283*123*192mm
Panel function
1. DC 5V IN, this interface can charge the product with an external DC input.
2. DC 12V output, 1-4 stable DC power supply can be output through this interface.
3. USB output can charge the product with voltage input 5V.
4. ON/OFF switch can be used control all function except the LED light.
5. LED/OFF switch can be used control light.
6. 4pcs blue light indicator shows charging status or current power level.
Audio Mixer
MP3/Radio power switch.
Short press changes to last song, the volume will turn down by long time press.
Short press pauses, long press 3S to search FM frequency automatically. Memory
function is also available.
Short press change to next song, the volume will turn up by long time pressed.
MP3/Radio Model choice.
AUX interface connector.
Charging method
1. When power indicator is 25% power station needs to be charged.
2. Use DC 5V to charge the product.
3. When indicator changes to red, the product is charging.
4. When fully charged Blue LED light will go on.
5. Power Station has overcharge and over discharge protection.
Warnings
1. Please read this instruction carefully before first use.
2. Please ensure the DC voltage is same as products use.
3. When LED is dark, pls charging immediately.
4. If the product is not used for a long time, it must be charged for more than 8 hours.
5. Please turn off the switch when not using this product.
6. The best use environment temperature is 0 - 40
WARNING: This product is not waterproof, please do not put it in the water.
Made in China
/