Instruction manual
Controller Charging Dock with Display for PS5
Keycode: 43055777
Safety instructions:
1. Place the Controller correct direction of the charging stand.
2. Use a soft, dry cloth to clean the product. Do not use solvents or other chemicals.
3. Do not wipe with a chemically-treated cleaning cloth.
4. Do not place the Charging Stand direct to sunlight or high temperature and humid place.
5. Do not disassemble the charging stand.
6. Do not touch the product with wet hands.
7. Do not throw or drop the product or subject it to strong physical shock.
8. Do not touch the ports or insert any foreign objects into the product.
9. Keep the product out of the reach of small children due to small children may swallow
small parts or may wrap the cables around themselves, which may inflict injury or cause an
accident or a malfunction.
Package Include:
1 x Dual Charging Stand for PS5 Controller
1 x USBC cable
2 x Detachable USBC adapter
1 x User manual
Specification:
Input Voltage: DC 5V/2A
Output Voltage: DC 5V/600mA*2
Features:
Charging Instruction:
1. Connect a USB power adapter (not included) with DC 5V /2A or above power adapter
will be required.
2. Connect the USBC cable (Included) to the charging stand.
3. Remove the USBC adapter from the charging stand, insert it into your controller.
4. Place your controller on the charging stand to start charge. It can charge two PS5
controllers simultaneously.
Indicator light identification:
Color of indicator
Working status
Off
No power connected
Green
Power connected & Fully charged
Red
Device Charging
Green &Red Flashing
Power too low for charging (less than 5V/2A)
Note:
1. Charge protection function, only when the device battery power is lower than 80%, will
begin charging.
2. The 5V power adapter with current over 2A shall be used for power supply. If the power
supply power is insufficient, the charging indicator may flash without charging.
-
1
-
2
