Humax HGD310 User manual

Brand: Humax

Model: HGD310

Category: Signal cables

Type: User manual

Humax HGD310 is a high-speed cable modem that allows you to experience fast and reliable internet connectivity. With its DOCSIS 3.1 technology, it supports blazing-fast internet speeds, enabling you to enjoy seamless streaming, gaming, and browsing experiences. It features two Gigabit Ethernet ports for wired connections, ensuring a stable and high-speed internet connection for your devices. The Link Aggregation feature combines both LAN ports to provide a bonded connection, increasing the speed up to 2 Gbps.

Skip to content
Manuals+
User Manuals Simplified.
HUMAX HGD310 Cable Modem User Manual
Home » HUMAX » HUMAX HGD310 Cable Modem User Manual 
Contents [ hide
HUMAX HGD310 Cable Modem
Accessories
Product Overview
1 Front Panel
2 Rear Panel
3 Label
Connecting Your Cable Modem
1 Powering On
2 Connection
3 Activate Your Internet Service
Monitoring Your Cable Modem
1 Map on Web UI
2 Home Menu
3 Advanced Features
4 Link Aggregation
Specification
Troubleshooting
Safety and Regulatory
Information
Important Safety Instructions
File Downloads
References
Related Manuals

HUMAX HGD310 Cable Modem

Accessories

The following items should be found in your package.

Product Overview

Front Panel

Your cable modem has LEDs on the front panel to indicate the working status. You can refer to the table below to

check your cable modem works properly.

LEDs on for checking working status

LED Operation

POWER

Green On The power is on.

Off The power is off.

Green On The downstream signal channels is

locked.

Green Blinking

The downstream scanning is in

progress.

The software update (over-the-air) is in

progress.

Off No downstream channel is locked.

Green On The upstream signal channels is locked.

Green Blinking

The upstream scanning is in progress.

The software update (over-the-air) is in

progress.

Off No upstream channel is locked.

ONLINE

Green On The cable modem is online.

Green Blinking The cable modem is offline.

LAN

Green On Network device is connected to the LAN

ports.

Green Blinking Data is being transmitted through the

LAN ports.

Off No device is connected to the LAN port.

Rear Panel

The back panel provides the connections and button shown the following figure.

Label

The label is located on the side the cable modem. It contains specific cable modem ID that you may need when

contacting your service provider or HUMAX Technical Support for assistance.

To receive Internet service, you need to contact your service provider for assistance. You may have to provide Model

Name, Serial Number and MAC Address listed on the cable modem label.

Connecting Your Cable Modem

Follow the steps below to install the product and activate the Internet service.

Powering On

Plug in the DC power adapter from the power connector to an electrical outlet.

If the power successfully turns on, a green light on the POWER LED is turned on.

Note:

Use only the DC power adapter provided in this product. Using other adapters may damage the product.

If you want to connect additional device(e.g.: PC, router, game console, etc) to 2nd Ethernet port while 1st

Ethernet port is being used, you need two (2) IP addresses. Please contact your service provider to check your

Internet plans and packages before connecting.

If you want to use the Link Aggregation feature, refer to 3.3 Advanced Features > Link Aggregation section in

this document.

Connection

Follow the steps below to install the product and activate the Internet service. However, please read the warnings

below before proceeding.

Warning For safer protection, unplug your product from an electrical outlet and

disconnect the cables to avoid damage due to the lightning and power surges.

Connect the Coaxial Cable

Use a coaxial cable to connect HGD310 to the Internet.

Connect the coaxial cable from the wall socket to the CABLE port of HGD310.

If you use a cable splitter

a. Connect a coaxial cable from the wall socket to a cable splitter.

b. Connect another coaxial cable from the cable splitter to your TV.

c. Connect the other coaxial cable from the cable splitter to the CABLE port of HGD310.

Note: Check with your service provider to ensure broadband cable service is available in your area. Separate

purchasing of cable splitter is required.

Powering On

Connect the DC power adapter from the power connector to theelectrical outlet.. If the power successfully turns on, a

POWER LED at the front panel turns on.

Note: Make sure you use an adapter approved by UL.

Connect the PC or Router

Use an Ethernet cable to connect your router or PC to HGD310

Connect one end of the Ethernet cable to either ETHERNET port of HGD310 and the other end to the Ethernet port

of your router or PC.

Activate Your Internet Service

Comcast Xfinity

Activate your Internet service by using Comcast Xfinity’s self-activation process.

Before you start the self-activation process

Make sure to collect following information.

Comcast account number

Phone number (associated with Comcast account)

Using PC

1. Power ON the PC connected to your cable modem.

2. Open the PC’s web browser. You will be automatically redirected to the Xfinity self-activation page. If you are

not redirected to the Xfinity self-activation page, visit the following website: https://xfinity.com/activate

Note: For further assistance, please visit following URLs.

• Install & Activate Your Purchased Modem: https://xfinity.com/Internetsetup

• Home Networking Support: https://xfinity.com/Internetsupport

3. Provide your Xfinity information and complete the self-activation process.

Note: Duration of activation process might take up to 15 minutes.

Using Xfinity Mobile App

1. Download the Xfinity app on the App store or on the Google Play™. If you already have the Xfinity app, make

sure you have updated to the latest version.

2. Open the app and sign in with your Xfinity ID.

3. Follow the steps to get online.

If you cannot complete the Xfinity’s self-activation process

You can activate the Internet service through contact Comcast Xfinity customer service center at 1-800-XFINITY (1-

800-934-6489)

Note: When you call Comcast Xfinity customer service center, they may ask to provide the following information.

Modem manufacturer: HUMAX

Modem model number: HGD310

Model serial number: Serial number is on the product label, which is on the side of the cable modem

Modem MAC address: MAC address is on the product label, which is on the side of the cable modem

Charter Spectrum

Before activating the Internet service Make sure to collect following information.

Charter account information

Modem model number: HGD310

Model serial number: Serial number is on the product label, which is on the side of the cable modem

Modem MAC address: MAC address is on the product label, which is on the side of the cable modem

Activate your Internet service with Charter Spectrum

Select one of the two methods and activate it to activate the Internet service.

1. Visit the following website: https://activate.spectrum.net/ and follow the prompts to activate your Internet

service.

2. Call Charter Spectrum for support at 1-833-267-6094

Note: Listed contact information is subject to change. You can also find the contact information in your monthly

Internet service billing statement.

Monitoring Your Cable Modem

You can easily check the status of the cable modem through the Web UI. Web-based utility can be used on any

Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Google Chrome, Mozilla

Firefox or Apple Safari.

Follow the instructions below to log into your cable modem.

1. Connect the Ethernet cable between LAN port of Cable Modem and LAN port of PC.

2. Open the PC’s web browser.

3. Enter https://192.168.100.1 to the address bar, and then press the Enter key.

4. Enter the ID and password. The default ID and password are printed label of your cable modem. They are case-

sensitive.

5. Click the Login button.

Note: We recommend you change the password to secure your network. Go to System > Change Password to

change your password.

Map on Web UI

Follow the steps below to install the product and activate the Internet service. However, please read the warnings

below before proceeding.

Header

The header is always displayed at the top of the web page. You can see the Manufacturer /Model Name, Internet

status, Help message and System settings.

Manufacturer/ Model Name

Internet Status: Show the Internet status.

Icon: Show the help message on each page.

System Icon: Support to set the Language, Change Password, Restart & Factory Reset and Date/Time.

Logout Icon: Can logout.

System > Change Password

You can change the login password. We recommend you change the password to secure your network.

System > Restart & Factory Reset

Restart: Reboot the system.

Factory Reset: Restore to the factory default settings. Then, the system will restart and it may take a few

minutes.

System > Date/Time

You can see the date and time of system.

Home Menu

You can see the information on the Internet and the connected devices in the home menu.

Internet Connection

Click the globe image to see the Internet connection status and Downstream/Upstream channel status.

Cable Modem Information

Click the product image to see the information on your cable modem.

Connected Devices

Click the network device image to see the information on the connected devices. You can check the number of

connected devices, their MAC addresses and device name.

Advanced Features

Logs

On/Off: Toggle to see the log information.

Level: Set the level of logs to be saved.

Display Level: Set the level of displayed log.

Click Log button to see the log information as below.

Link Aggregation

By combining both LAN port 1 & 2, HGD310 can support bonding that can increase speed up to 2Gbps. After

activating Link Aggregation feature, connect your PC or router with LAN port 1 & 2 simultaneously.

Note: To support Link Aggregation feature, your Internet plan should be over 2Gbps & also PC or router you want to

connect must support Link Aggregation feature as well, please check your Internet service status before usage.

Specification

Memory

NAND Flash NAND Flash 128MB

DRAM DRAM 256MB

Data Interface

Cable Modem DOCSIS 3.1

Channels

Downstream 2 OFDM for DOCSIS 3.1, 32 Channels

for DOCSIS 3.0

Upstream 2 OFDMA for DOCSIS 3.1, 8 Channels

for DOCSIS 3.0

Input / Output

Tuner F-Connector (female 75)

Ethernet Two(2) 10/100/1000 Gigabit Ethernet

Ports

Environmental

Input 100-120V~ 57/63Hz

Output 12V, 3A

Operating

Temperature 0° to 40°C

Physical Specification

Size (W x D x H) 45 x 152 x 160 (mm)

Weight 417.5g

Certification

CableLabs DOCSIS

FCC

Troubleshooting

You can find information to diagnose and solve problems you might have with your product. Before contacting the

customer service center, make sure to read the tips below carefully. If the problem persists after you complete the

following procedure, please contact the customer service for further instructions.

The product does not work

Check the POWER LED lights on.

Check the power adapter is plugged into a suitable electrical outlet.

Connect the power adapter to another electrical outlet.

Restart the system and wait until the POWER LED lights on.

Cannot login to the cable modem

Check the Ethernet cable is correctly connected between the cable modem and PC.

Make sure that PC’s IP address is on the same subnet as the cable modem. The IP address of your PC must

be in the range of 192.168.100.2 to 192.168.100.254.

Try to access with IP address 192.168.100.1.

Close the browser and launching it again.

Power off the cable modem by detaching the power adapter and then restart the system within a few seconds.

Safety and Regulatory Information

Notice

Please read this user guide carefully to be able to safely install, use and maintain the product at maximum

performance. Keep this user guide next to your product for future reference. The information in this guide is subject to

change without notice.

Not to be copied, used or translated in part or whole without prior consent in writing except approval of ownership of

Warranty

The warranty does not cover parts which may become defective due to misuse of the information contained in this

guide.

FCC Customer Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operations.

WARNING

Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate

the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference, the user is encouraged to try to correct the interference by

consulting with a dealer or an experienced technician for technical assistance.

To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be

placed on the apparatus.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers stoves, or other apparatus (including

amplifiers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.
10.  Only use attachments/accessories specified by the manufacturer.
11.  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
12.  Unplug this apparatus during lightning storms or when unused for long periods of time
13.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
14.  Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall
be placed on the apparatus.
15.  When wall mounting is needed, please maintain placement of HGD310 within 2 meters from the ground.
Note: Wall mount is not included in the package. This instruction is to comply with UL safety standard.
Support
For any technical queries, the HUMAX team are here to help. https://americas.humaxdigital.com/support
File Downloads
HUMAX User Manual
HGD310, Cable Modem
Download [optimized]
Download
HUMAX Installation Guide
HGD310, Cable Modem
Download [optimized]
Download
References
Xfinity Activation
Questions and Inquiries | HUMAX-Americas
Internet Help and Support | Xfinity by Comcast
How to Activate Your Xfinity Internet Service - Xfinity Support
Spectrum - Activation Home
Play™ Trademark
Related Manuals
1.  Cable Modem User Manual CABLE MODEM QUICK START This Quick Start describes how to...
2.  Hitron Cable Modem User Manual HITRON Cable Modem Step 1: Check the package contents Step...
3.  Cable Modem MB7220 User Manual Quick Start Cable Modem MB7220 Packaged with your modem Let’s...
4.  Zoom Cable Modem/Router 5363 User Manual  MODEL 5363 QUICK START This Quick Start describes how to...
5.  Cable Modem/Router with Wireless-N User Manual  Cable Modem/Router with Wireless-N U S E R M A...