2. NXP
  3. TWR-PROTO

NXP TWR-PROTO Operating instructions

  • Hello! I've reviewed the TWR-PROTO Quick Start Guide. This document details how to set up the prototyping module in Freescale's Tower System, including connecting it to the elevator and how to use the prototyping area. I am ready to answer your questions about the TWR-PROTO module.
  • How do I connect the modules?
    What can I do with the TWR-PROTO module?
TOWER SYSTEM Quick Start Guide for TWR-PROTO
Prototyping Module
Quick Start Guide
How to build your Tower
1. Press the card edge connector of each Tower
module into a slot on the elevator—take care
to match all the primary card edges and plug
them into a functional elevator. A module may be
placed into any slot on the elevator.
2. Press another elevator board onto the
secondary card edges.
TWR-PROTO features
• Accesstoallsignalsonprimaryandsecondary
elevator connectors for prototyping and
signal probing
• Prototypingareaforaddingcustomcircuitryto
Tower System
• Multiple5V,3.3VandGNDconnections
Freescale and the Freescale logo are trademarks or registered
trademarksofFreescaleSemiconductor,Inc.intheU.S.andother
countries. All other product or service names are the property of
theirrespectiveowners.©FreescaleSemiconductor,Inc.2009.
DocNumber:TWRPROTOQSG/REV0
AgileNumber:926-26187/REVA
Learn more at www.freescale.com/tower
TOWER SYSTEM
/