2. Ranger design
  3. 5037-F

Ranger design 5037-F Installation guide

  • I have reviewed the Quick Start Guide for the Ranger Design Cargo Tray 5037-F. This document outlines the assembly process and lists all the necessary components, including fasteners and rivets. I'm ready to answer any questions you have about the assembly or contents of this document.
  • What is the part number of the backer?
    How many hex bolts are included in the fastener kit?
    What type of rivet is used?
QUICK START GUIDE
5037-F Axess Tray Sliding Cargo Tray
For technical support, contact us at 1-800-565-5321 5037-F Quick Start Guide | REV. A1 | Page 2
PHASE 1 – ASSEMBLY
1.1 SETUP
Item No. Description Qty.
56-209 Backer, 42”, Axess Tray 1
90-5018 Fastener Kit 1
BILL OF MATERIALS
1.1.1 Unpack components; compare with the bill of materials.
1.1.2 Verify all parts are present.
90 - 5018 Fastener Kit Fastener Install
1.1.3 Fastener kits.
6×6×
#90-114 Hex Bolt 1/4" × 1"
#98-100 Tooth Lock Washer
#98-112 Flat Washer
#94-130 Plus nut
# 90-114
Hex Bolt
1/4"-20 × 1"
GR-5 ZINC
6×6×
6×6× Plusnut .250
# 94-130
28×28×
#96-202 Closed Rivet
# 96-202
Closed Rivet
3/16 × 1/4"
Aluminum/Steel
23×23×
6×6× # 98-100 Lock Washer External Tooth
ZINC
56-209
/