urban ambiance UQL3271 Installation guide

Brand
urban ambiance
Model
UQL3271
Type
Installation guide

Urban ambiance UQL3271 is a stylish and functional ceiling light fixture that is perfect for adding a touch of elegance to any room. With its easy installation and vintage-style bulb, this fixture is sure to become a favorite in your home.

The UQL3271 is made of high-quality materials and features a durable black bronze finish. It is designed to be used with a single medium base 60W vintage bulb (supplied), but can accommodate up to a 100W maximum. The fixture is also dimmable, so you can adjust the brightness to create the perfect ambiance for any occasion.

Urban ambiance UQL3271 is a stylish and functional ceiling light fixture that is perfect for adding a touch of elegance to any room. With its easy installation and vintage-style bulb, this fixture is sure to become a favorite in your home.

The UQL3271 is made of high-quality materials and features a durable black bronze finish. It is designed to be used with a single medium base 60W vintage bulb (supplied), but can accommodate up to a 100W maximum. The fixture is also dimmable, so you can adjust the brightness to create the perfect ambiance for any occasion.

1of2
Package Contents
ACrossbar Assembly
x1
B
C
F
Ring
x1
D
EShade Holder
x1
Fixture
Body
x1
Shade
x1
STEP 1 - Install the Shade
Two people are required for this step.
A. Remove lock balls from bottom of
the Fixture Body (B).
B. Place the Ring (C) onto the top
edge of the Shade (D). Place
bottom edge of the Shade (D) into
the Shade Holder (E).
C. Lift the shade assembly up and
pass the arms of the Fixture Body
(B) through the Shade (D).
Position the holes on the Shade
Holder (E) to the arms on the
Fixture Body (B). The second
person is to secure the Shade
Holder (E) by threading the lock
balls onto the ends of the arms of
the Fixture Body (B). Hand tighten
until snug.
E
Lock Ball
Figure 1
STEP 2 -Installing the Crossbar Assembly
A. Pass the supply wires through the Crossbar Assembly (A). Attach
the Crossbar Assembly (A) to the Outlet Box with the head of the
Green Ground Screw facing you. Secure the Crossbar Assembly (A)
with Outlet Box Screws (not included). Tighten until snug.
Supply Wires
with Ground Wire
Outlet Box Screws
(not included)
Outlet Box
A
Figure 2
STEP 3 Test Fitting Ceiling Canopy to Crossbar Assembly-
A.
Ceiling Canopy to the
Ceiling Canopy
ceiling
Remove mounting balls from the Crossbar Assembly (A). Fit the
and Fixture Body (B) Crossbar Assembly (A)
and secure with mounting balls. Note: The should
be snug against the and the mounting balls. If not, adjust
the length of the nipple on the Crossbar Assembly (A) by
unscrewing the preassembled hex nut and lock washer and then
screwing the mounting screws in or out of the crossbar until the
correct length is achieved. Once the Ceiling Canopy and Fixture
Body (B) is secure, remove the mounting ball and Fixture Body (B)
and proceed to Step 4.
D
C
B
Mounting
Screw
Hex Nut and
Lock Washer
Mounting Ball
A
Ceiling
Canopy
Figure 3
B
Pleasegoto forproductcleaningtips.Gotothe selection.
(1)MediumBase60WVintageBulb(supplied),100WMaximum.
30-45minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
www.quoizel.com Care + Maintenance
LightSource:
EstimatedAssemblyTime:
Preparation:
ToolsRequired: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Vintage Bulb
x1
Installation Instructions: UQL3271
www.urbanambiance.com
2of2
STEP 4 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Figure 4
STEP 5 Install the Fixture-
A. Carefully tuck all wires into the outlet box and position the Ceiling
Canopy and Fixture Body (B) over the outlet box. Align the holes in
the Ceiling Canopy with the mounting screws, then attach the
Ceiling Canopy and Fixture Body (B) using the previously removed
mounting balls. Hand tighten until snug.
Figure 5
White wire
from outlet box White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from fixture
Bare, or Green
Ground wire
from outlet box
OR
Ground wire
from fixture
Green Ground Screw
on the Crossbar
STEP 6 Install the Bulb-
A. Insert the bulb (F) onto the socket and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
Socket
Figure 6
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
UQL3271
FINISH: BLACK BRONZE
5” Dia.
10” Dia.
4.25”
9.25”
Mounting
Screw
Mounting Ball
A
Ceiling
Canopy
B
F
www.urbanambiance.com
  • Page 1 1
  • Page 2 2

urban ambiance UQL3271 Installation guide

Brand
urban ambiance
Model
UQL3271
Type
Installation guide

Urban ambiance UQL3271 is a stylish and functional ceiling light fixture that is perfect for adding a touch of elegance to any room. With its easy installation and vintage-style bulb, this fixture is sure to become a favorite in your home.

The UQL3271 is made of high-quality materials and features a durable black bronze finish. It is designed to be used with a single medium base 60W vintage bulb (supplied), but can accommodate up to a 100W maximum. The fixture is also dimmable, so you can adjust the brightness to create the perfect ambiance for any occasion.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents